A Numerical Study of Skid Marks on the Slabs in a Walking-Beam Type Slab Reheating Furnace
Authors:
- 19 January 2010
- journal article
- research article
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 57 (1) , 1-17
Abstract
Three-dimensional simulations are performed for the turbulent reactive flow and radiation heat transfer in a walking-beam type slab reheating furnace. The temperature nonuniformity of the slab, which causes skid marks later during the rolling process, is explored and its improvement is investigated by varying either the distance between two static beams or the height of the skid buttons. The numerical model built takes care of the true geometry and all components of a real furnace. The temperature distributions of the slab and the gas mixture are obtained through a coupled calculation. The investigation shows the skid mark is mainly caused by the radiation shielding effect of the walking-beam system and worsened by the cooling system. The skid mark above the static beam near the furnace wall is more serious than above the other static beam because of poor mixing of fuel and air, and thus less combustion there. To improve the skid mark, the static beams should be moved outward in the soaking zone and the height of the skid button should be increased.Keywords
This publication has 15 references indexed in Scilit:
- Numerical Modeling of a Walking-Beam-Type Slab Reheating FurnaceNumerical Heat Transfer, Part A: Applications, 2008
- A heat transfer model for the analysis of transient heating of the slab in a direct-fired walking beam type reheating furnaceInternational Journal of Heat and Mass Transfer, 2007
- Estimation of the Transient Surface Temperature, Heat Flux and Effective Heat Transfer Coefficient of a Slab in an Industrial Reheating Furnace by using an Inverse MethodSteel Research International, 2007
- The Modeling of the Gas Flow and Its Influence on the Scale Accumulation in the Steel Slab Pusher-type Reheating FurnaceISIJ International, 2003
- THREE-DIMENSIONAL ANALYSIS OF THE WALKING-BEAM-TYPE SLAB REHEATING FURNACE IN HOT STRIP MILLSNumerical Heat Transfer, Part A: Applications, 2000
- Prediction of Transient Slab Temperature Distribution in the Re-heating Furnace of a Walking-beam Type for Rolling of Steel Slabs.ISIJ International, 2000
- A FINITE ELEMENT METHOD FOR SOLUTION OF THE THREE-DIMENSIONAL TIME-DEPENDENT HEAT-CONDUCTION EQUATION WITH APPLICATION FOR HEATING OF STEELS IN REHEATING FURNACESNumerical Heat Transfer, Part A: Applications, 1999
- NUMERICAL MODELING OF THE THERMAL PERFORMANCE OF REGENERATIVE SLAB REHEAT FURNACESNumerical Heat Transfer, Part A: Applications, 1997
- Two-Dimensional Modeling and Parametric Studies of Heat Transfer in a Direct-Fired Furnace with Impinging JetsCombustion Science and Technology, 1994
- Computer Simulation of the Slab Reheating FurnaceCanadian Metallurgical Quarterly, 1988