A re-evaluation of the hull girder shakedown limit states
- 16 January 2019
- journal article
- research article
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 14 (sup1) , 239-250
Abstract
This paper investigates the use of shakedown limit state in the assessment of longitudinal strength of ship hull girders. This consideration is related to the fact that a structural system subjected to cyclic loadings may suffer from plastic collapse even when the loading magnitude is less than the instantaneous collapse load of single excursion. This paper first evaluates the shakedown limit state of a box girder model with and without the consideration of buckling. Nonlinear finite element analyses are also performed to investigate the structural behaviours of a case study model under six different cyclic loading protocols. The rationality of a shakedown limit state is discussed and an energy-based characterisation of limit state is suggested. The study shows that, whilst the use of shakedown limit state assessment may be overly conservative, the safety margin based on an ultimate limit state approach might be considerably reduced.Keywords
This publication has 9 references indexed in Scilit:
- Energy dissipation analysis of elastic–plastic materialsComputer Methods in Applied Mechanics and Engineering, 2018
- Effect of residual stress shakedown on stiffened plate strength and behaviourShips and Offshore Structures, 2013
- Compartment level progressive collapse analysis of lightweight ship structuresMarine Structures, 2013
- A simple formulation for predicting the ultimate strength of shipsJournal of Marine Science and Technology, 1995
- The idealized structural unit method and its application to deep girder structuresComputers & Structures, 1984
- Analysis of Ultimate Strength of Stiffened Rectangular Plate (4th Report)Journal of the Society of Naval Architects of Japan, 1983
- On the Shakedown Limit of a Ship’s Hull GirderJournal of Ship Research, 1975
- An Ultimate Transverse Strength Analysis of Ship StructureJournal of the Society of Naval Architects of Japan, 1974
- Problem Types in the Theory of Perfectly Plastic MaterialsJournal of the Aeronautical Sciences, 1948