Simon Benson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Simon Benson has a total of 66 co-authors. Here are the top co-authors by number of shared publications:
- Jonathan Downes
Fluid-Structure Interactions Group, University of Southampton, SO16 7QF, United Kingdom
5 shared publications Robert S. Dow
4 shared publications- Shen Li
Department of Naval Architecture, Ocean and Marine Engineering, University of Strathclyde, Glasgow, UK
4 shared publications Alan J. Murphy
Newcastle University, Newcastle upon Tyne, UK
3 shared publications- Musa Bashir
Civil and Environmental Engineering, University of Liverpool, Liverpool, UK
3 shared publications Daniel Cunny
Soil Machine Dynamics Ltd, Newcastle Upon Tyne, UK
2 shared publications
Latest Publications
- Open Access
- 21 May 2024
- Published by TU Delft OPEN Publishing in International Marine Design Conference
Flipflopi: Circular economy design inspiration from a recycled plastic sailing dhow
Flipflopi is an East African organisation with a mission to end single use plastic, driving this agenda using circular economy principles applied to the design and build of fully recycled plastic sailing dhows from their boatyard in Lamu Kenya. Flipflopi has achieved measurable global impact by showcasing the world’s first ocean going recycled sailing boat, Ndogo, a 9 metre long, lateen rigged dhow which has sailed the East African coastline and across Lake Victoria. Flipflopi is now aiming to build a much larger ocean-going dhow, named Kubwa, which presents further technical challenges from a marine design perspective. To meet these challenges. Flipflopi are utilising a combination of generational heritage boatbuilding expertise in Lamu; specific design experience from building and sailing Ndogo; technological progress driven by other recycled plastic projects; and more formalised naval architecture and engineering design approaches. This paper introduces the context within which Flipflopi is centred, the links to circular economy design principles and the specific design challenges from working with recycled plastic as a boatbuilding material.
- 21 May 2024
- Published by TU Delft OPEN Publishing in International Marine Design Conference
Open AccessFlipflopi: Circular economy design inspiration from a recycled plastic sailing dhow
Flipflopi is an East African organisation with a mission to end single use plastic, driving this agenda using circular economy principles applied to the design and build of fully recycled plastic sailing dhows from their boatyard in Lamu Kenya. Flipflopi has achieved measurable global impact by showcasing the world’s first ocean going recycled sailing boat, Ndogo, a 9 metre long, lateen rigged dhow which has sailed the East African coastline and across Lake Victoria. Flipflopi is now aiming to build a much larger ocean-going dhow, named Kubwa, which presents further technical challenges from a marine design perspective. To meet these challenges. Flipflopi are utilising a combination of generational heritage boatbuilding expertise in Lamu; specific design experience from building and sailing Ndogo; technological progress driven by other recycled plastic projects; and more formalised naval architecture and engineering design approaches. This paper introduces the context within which Flipflopi is centred, the links to circular economy design principles and the specific design challenges from working with recycled plastic as a boatbuilding material.
- 10 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 15-22
CART-II: Development of Collision Avoidance Robotic Tether with Soft Sensing Capabilities for Underwater Nuclear Inspection Vehicles
In nuclear inspection environments, a tether cable is used to transfer power and data between the underwater robotic system and the surface control unit. During underwater nuclear inspection, the tether cable can become entangled and loop with the environment such as nuclear waste boxes and objects. The risk of colliding with underwater objects is increased by the presence of more inspection robots underwater, especially if they are equipped with manipulator arms. As a result of the loops and knots around the cable, the inspection process may be affected and the ROV may not be able to perform its job. The present article is an extended development of the previous Collision Avoidance Robotic Tether (CART-I) model [1]. The CART-I system consists of micro thrusters that are attached to the base unit by a tether cable. The micro thrust unit is capable of generating a small amount of thrust that can move the tether away from obstacles in the water, particularly in restricted spaces. The use of light detection technologies such as IR or LiDAR for obstacle detection is not effective underwater due to the complex motion dynamics of the tether underwater and the size of obstacles, which makes it impossible to provide definite identification of the objects within a given time period. In order to provide the surroundings of the micro thrust units with obstacle detection capability, we have developed an autonomous force soft sensor. Additionally, the soft moulded sealed encase was developed for effective force detection underwater, and was experimentally tested in a water tank to validate our proposed design. Simulation and experimental results of the sensor is provided. The overall goal of the CART-II is to provide a smart autonomous vision of obstacle avoidance using soft force sensing capabilities. This paper presents the full kinematic model and the simulation with finite element analysis of the CART-II system with the hardware and physical implementation of the soft sensor in order to enhance the performance of traditional tether systems.
- 10 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 15-22
CART-II: Development of Collision Avoidance Robotic Tether with Soft Sensing Capabilities for Underwater Nuclear Inspection Vehicles
In nuclear inspection environments, a tether cable is used to transfer power and data between the underwater robotic system and the surface control unit. During underwater nuclear inspection, the tether cable can become entangled and loop with the environment such as nuclear waste boxes and objects. The risk of colliding with underwater objects is increased by the presence of more inspection robots underwater, especially if they are equipped with manipulator arms. As a result of the loops and knots around the cable, the inspection process may be affected and the ROV may not be able to perform its job. The present article is an extended development of the previous Collision Avoidance Robotic Tether (CART-I) model [1]. The CART-I system consists of micro thrusters that are attached to the base unit by a tether cable. The micro thrust unit is capable of generating a small amount of thrust that can move the tether away from obstacles in the water, particularly in restricted spaces. The use of light detection technologies such as IR or LiDAR for obstacle detection is not effective underwater due to the complex motion dynamics of the tether underwater and the size of obstacles, which makes it impossible to provide definite identification of the objects within a given time period. In order to provide the surroundings of the micro thrust units with obstacle detection capability, we have developed an autonomous force soft sensor. Additionally, the soft moulded sealed encase was developed for effective force detection underwater, and was experimentally tested in a water tank to validate our proposed design. Simulation and experimental results of the sensor is provided. The overall goal of the CART-II is to provide a smart autonomous vision of obstacle avoidance using soft force sensing capabilities. This paper presents the full kinematic model and the simulation with finite element analysis of the CART-II system with the hardware and physical implementation of the soft sensor in order to enhance the performance of traditional tether systems.
- Open Access
- 1 September 2021
- Published by Elsevier in Marine Structures
- Vol. 79
The ISSC 2022 committee III.1-Ultimate strength benchmark study on the ultimate limit state analysis of a stiffened plate structure subjected to uniaxial compressive loads
- 1 September 2021
- Published by Elsevier in Marine Structures
- Vol. 79
Open AccessThe ISSC 2022 committee III.1-Ultimate strength benchmark study on the ultimate limit state analysis of a stiffened plate structure subjected to uniaxial compressive loads
- 8 July 2021
- Published by Taylor & Francis
- p. 557-566
The effects of welding-induced residual stress on the buckling collapse behaviours of stiffened panels
An assessment is conducted in this paper for the effects of welding-induced residual stress on the elastoplastic buckling collapse behaviour of stiffened panels subjected to in-plane compression. A series of nonlinear finite element analyses are completed which covers a range of plate slenderness ratios (β = 1.0~4.0) and column slenderness ratios (λ = 0.2~1.2) typical in marine application. The finite element models incorporate an idealised distribution of welding-induced residual stress with average severity. The numerical investigation indicates a reduced ultimate strength and increased ultimate strain due to the residual stress, as compared with the initial stress-free condition. Hence, a set of design formulae are proposed with the aid of regression analysis to predict the ultimate strength reduction and ultimate strain variation. The proposed design formulae are employed in combination with an empirical load-shortening curve formulation and simplified progressive collapse method to predict the ultimate bending capacity reduction of a box girder model. Validation is completed through equivalent finite element analysis.
- 8 July 2021
- Published by Taylor & Francis
- p. 557-566
The effects of welding-induced residual stress on the buckling collapse behaviours of stiffened panels
An assessment is conducted in this paper for the effects of welding-induced residual stress on the elastoplastic buckling collapse behaviour of stiffened panels subjected to in-plane compression. A series of nonlinear finite element analyses are completed which covers a range of plate slenderness ratios (β = 1.0~4.0) and column slenderness ratios (λ = 0.2~1.2) typical in marine application. The finite element models incorporate an idealised distribution of welding-induced residual stress with average severity. The numerical investigation indicates a reduced ultimate strength and increased ultimate strain due to the residual stress, as compared with the initial stress-free condition. Hence, a set of design formulae are proposed with the aid of regression analysis to predict the ultimate strength reduction and ultimate strain variation. The proposed design formulae are employed in combination with an empirical load-shortening curve formulation and simplified progressive collapse method to predict the ultimate bending capacity reduction of a box girder model. Validation is completed through equivalent finite element analysis.
- Open Access
- 11 June 2021
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 16 (sup1) , 122-139
An adaptable algorithm to predict the load-shortening curves of stiffened panels in compression
An adaptable algorithm is proposed in this study, which can predict the complete load-shortening curve of a stiffened panel subjected to uniaxial longitudinal compression. The algorithm provides an extension to existing empirical formulae initially derived for predicting the ultimate compressive strength of stiffened panels. Based on observations from a series of nonlinear finite element analyses, the compressive load-shortening behaviour of stiffened panels is idealised with a linear pre-collapse response, an arc-shaped nonlinear ultimate collapse region and an asymptotic post-collapse decay. The algorithm allows direct modification of the elastic stiffness, ultimate strain, ultimate strength and post-collapse characteristics of the load shortening curve. This enables the load shortening curve to incorporate characteristics specific to the type of stiffened panel under analysis. The capability of the algorithm is demonstrated through an application with the simplified progressive collapse method to calculate the ultimate ship hull strength of four merchant ships and one naval vessel.
- 11 June 2021
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 16 (sup1) , 122-139
Open AccessAn adaptable algorithm to predict the load-shortening curves of stiffened panels in compression
An adaptable algorithm is proposed in this study, which can predict the complete load-shortening curve of a stiffened panel subjected to uniaxial longitudinal compression. The algorithm provides an extension to existing empirical formulae initially derived for predicting the ultimate compressive strength of stiffened panels. Based on observations from a series of nonlinear finite element analyses, the compressive load-shortening behaviour of stiffened panels is idealised with a linear pre-collapse response, an arc-shaped nonlinear ultimate collapse region and an asymptotic post-collapse decay. The algorithm allows direct modification of the elastic stiffness, ultimate strain, ultimate strength and post-collapse characteristics of the load shortening curve. This enables the load shortening curve to incorporate characteristics specific to the type of stiffened panel under analysis. The capability of the algorithm is demonstrated through an application with the simplified progressive collapse method to calculate the ultimate ship hull strength of four merchant ships and one naval vessel.
- 1 September 2020
- Published by Elsevier in Marine Structures
- Vol. 73
Progressive collapse analysis of ship hull girders subjected to extreme cyclic bending
- 1 September 2020
- Published by Elsevier in Marine Structures
- Vol. 73
Progressive collapse analysis of ship hull girders subjected to extreme cyclic bending
- 7 February 2020
- Published by Taylor & Francis in Biofouling
- Vol. 36 (2) , 169-182
Frictional drag measurements of large-scale plates in an enhanced plane channel flowcell
This paper describes the design of an enhanced, plane channel, flowcell and its use for testing large-scale coated plates (0.6 m × 0.22 m) in fully developed flow, over a wide range of Reynolds numbers, with low uncertainty. Two identical, hydraulically smooth plates were experimentally tested. Uniform biofilms were grown on clean surfaces to test skin friction changes resulting from different biofilm thickness and densities. A velocity survey of the flowcell measurement section, using laser Doppler anemometry, showed a consistent velocity profile and low turbulence intensity in the central flow channel. The skin friction coefficient was experimentally determined using a pressure drop method. Results correlate closely to previously published regression data, particularly at higher speeds. Repeated measurements indicated very low uncertainty. This study demonstrates this flowcell’s applicability for representing consistent frictional drag of ship hull surfaces, enabling comparability of hydrodynamic drag caused by surface roughness to the reference surface measurements.
- 7 February 2020
- Published by Taylor & Francis in Biofouling
- Vol. 36 (2) , 169-182
Frictional drag measurements of large-scale plates in an enhanced plane channel flowcell
This paper describes the design of an enhanced, plane channel, flowcell and its use for testing large-scale coated plates (0.6 m × 0.22 m) in fully developed flow, over a wide range of Reynolds numbers, with low uncertainty. Two identical, hydraulically smooth plates were experimentally tested. Uniform biofilms were grown on clean surfaces to test skin friction changes resulting from different biofilm thickness and densities. A velocity survey of the flowcell measurement section, using laser Doppler anemometry, showed a consistent velocity profile and low turbulence intensity in the central flow channel. The skin friction coefficient was experimentally determined using a pressure drop method. Results correlate closely to previously published regression data, particularly at higher speeds. Repeated measurements indicated very low uncertainty. This study demonstrates this flowcell’s applicability for representing consistent frictional drag of ship hull surfaces, enabling comparability of hydrodynamic drag caused by surface roughness to the reference surface measurements.
- 1 November 2019
- Published by Elsevier in Engineering Structures
- Vol. 199
An analytical method to predict the buckling and collapse behaviour of plates and stiffened panels under cyclic loading
- 1 November 2019
- Published by Elsevier in Engineering Structures
- Vol. 199
An analytical method to predict the buckling and collapse behaviour of plates and stiffened panels under cyclic loading
- 15 April 2019
- Published by Taylor & Francis
- p. 149-157
A cyclic progressive collapse method to predict the bending response of a ship hull girder
- 15 April 2019
- Published by Taylor & Francis
- p. 149-157
A cyclic progressive collapse method to predict the bending response of a ship hull girder
- 16 January 2019
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 14 (sup1) , 239-250
A re-evaluation of the hull girder shakedown limit states
This paper investigates the use of shakedown limit state in the assessment of longitudinal strength of ship hull girders. This consideration is related to the fact that a structural system subjected to cyclic loadings may suffer from plastic collapse even when the loading magnitude is less than the instantaneous collapse load of single excursion. This paper first evaluates the shakedown limit state of a box girder model with and without the consideration of buckling. Nonlinear finite element analyses are also performed to investigate the structural behaviours of a case study model under six different cyclic loading protocols. The rationality of a shakedown limit state is discussed and an energy-based characterisation of limit state is suggested. The study shows that, whilst the use of shakedown limit state assessment may be overly conservative, the safety margin based on an ultimate limit state approach might be considerably reduced.
- 16 January 2019
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 14 (sup1) , 239-250
A re-evaluation of the hull girder shakedown limit states
This paper investigates the use of shakedown limit state in the assessment of longitudinal strength of ship hull girders. This consideration is related to the fact that a structural system subjected to cyclic loadings may suffer from plastic collapse even when the loading magnitude is less than the instantaneous collapse load of single excursion. This paper first evaluates the shakedown limit state of a box girder model with and without the consideration of buckling. Nonlinear finite element analyses are also performed to investigate the structural behaviours of a case study model under six different cyclic loading protocols. The rationality of a shakedown limit state is discussed and an energy-based characterisation of limit state is suggested. The study shows that, whilst the use of shakedown limit state assessment may be overly conservative, the safety margin based on an ultimate limit state approach might be considerably reduced.