Design of Novel Flash Ironmaking Reactors for Greatly Reduced Energy Consumption and CO2 Emissions
Open Access
Abstract
The development of a novel ironmaking technology based on fine iron ore concentrate in a flash reactor is summarized. The design of potential industrial reactors for flash ironmaking based on the computational fluid dynamics technique is described. Overall, this simulation work has shown that the size of the reactor used in the novel flash ironmaking technology (FIT) can be quite reasonable vis-à-vis the blast furnaces. A flash reactor of 12 m diameter and 35 m height with a single burner operating at atmospheric pressure would produce 1.0 million tons of iron per year. The height can be further reduced by either using multiple burners, preheating the feed gas, or both. The computational fluid dynamics (CFD)-based design of potential industrial reactors for flash ironmaking pointed to a number of features that should be incorporated. The flow field should be designed in such a way that a larger portion of the reactor is used for the reduction reaction but at the same time excessive collision of particles with the wall must be avoided. Further, a large diameter-to-height ratio that still allows a high reduction degree should be used from the viewpoint of decreased heat loss. This may require the incorporation of multiple burners and solid feeding ports.Keywords
Funding Information
- U.S. Department of Energy (DE-EE0005751)
This publication has 17 references indexed in Scilit:
- The kinetics of carbon monoxide reduction of magnetite concentrate particles through CFD modellingIronmaking & Steelmaking: Processes, Products and Applications, 2021
- Kinetics of hydrogen reduction of magnetite concentrate particles at 1623–1873 K relevant to flash ironmakingIronmaking & Steelmaking: Processes, Products and Applications, 2020
- Analysis of the Reduction Rate of Hematite Concentrate Particles in the Solid State by H2 or CO in a Drop-Tube Reactor Through CFD ModelingMetallurgical and Materials Transactions B, 2017
- Kinetics of Hydrogen Reduction of Magnetite Concentrate Particles in Solid State Relevant to Flash IronmakingSteel Research International, 2016
- Analysis of the Hydrogen Reduction Rate of Magnetite Concentrate Particles in a Drop Tube Reactor Through CFD ModelingMetallurgical and Materials Transactions B, 2016
- Flowsheet development, process simulation and economic feasibility analysis for novel suspension ironmaking technology based on natural gas: Part 3 – Economic feasibility analysisIronmaking & Steelmaking: Processes, Products and Applications, 2013
- Flowsheet development, process simulation and economic feasibility analysis for novel suspension ironmaking technology based on natural gas: Part 2 – Flowsheet and simulation for ironmaking combined with steam methane reformingIronmaking & Steelmaking: Processes, Products and Applications, 2013
- Flowsheet development, process simulation and economic feasibility analysis for novel suspension ironmaking technology based on natural gas: Part 1 – Flowsheet and simulation for ironmaking with reformerless natural gasIronmaking & Steelmaking: Processes, Products and Applications, 2012
- Effects of Reducing Gas on Swelling and Iron Whisker Formation during the Reduction of Iron Oxide CompactSteel Research International, 2012
- Process Simulation and Economic Feasibility Analysis for a Hydrogen‐Based Novel Suspension Ironmaking TechnologySteel Research International, 2011