Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


De-Qiu Fan has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of the Flash Ironmaking Technology (FIT) for Green Ironmaking with Low Energy Consumption

    by Hong Yong Sohn, Mohamed Elzohiery, De-Qiu Fan

    This article describes the development of a novel ironmaking technology based on flash reduction. The development started with the proof of the kinetic feasibility, considering that a typical flash reactor provides only a few seconds of residence time. This was followed by tests in a laboratory flash reactor and finally a pilot plant operation. The rate equations formulated in this work were developed considering the optimum combination of temperature, residence time, and reducing gas partial pressure to achieve > 95% reduction degree. Experiments in the intermediate-scale laboratory flash reactor indicated that more than 90% reduction degree could be obtained in a few second residence time at temperature as low as 1175 °C. A pilot reactor operating at 1200-1550 °C was installed and run to collect data necessary for scaling up the process. The tests in this large reactor validated the design concept in terms of heat supply and residence time, and identified technical hurdles. This investigation proved the technical feasibility of the flash ironmaking technology. The results of this work will facilitate the design for the industrial flash ironmaking reactor. The novel technology is expected to decrease the energy consumption in ironmaking by up to 44% compared with the average blast furnace process, and will reduce CO2 emissions by up to 51%. When hydrogen is used, the proposed process would use up to 60% less energy with little carbon dioxide emissions. However, it is noted that the energy requirements and CO2 emissions during the production of natural gas, hydrogen or coal must be added for a comprehensive comparison.


  • Open Access

    Design of Novel Flash Ironmaking Reactors for Greatly Reduced Energy Consumption and CO2 Emissions

    by Hong Yong Sohn, De-Qiu Fan, Amr Abdelghany

    The development of a novel ironmaking technology based on fine iron ore concentrate in a flash reactor is summarized. The design of potential industrial reactors for flash ironmaking based on the computational fluid dynamics technique is described. Overall, this simulation work has shown that the size of the reactor used in the novel flash ironmaking technology (FIT) can be quite reasonable vis-à-vis the blast furnaces. A flash reactor of 12 m diameter and 35 m height with a single burner operating at atmospheric pressure would produce 1.0 million tons of iron per year. The height can be further reduced by either using multiple burners, preheating the feed gas, or both. The computational fluid dynamics (CFD)-based design of potential industrial reactors for flash ironmaking pointed to a number of features that should be incorporated. The flow field should be designed in such a way that a larger portion of the reactor is used for the reduction reaction but at the same time excessive collision of particles with the wall must be avoided. Further, a large diameter-to-height ratio that still allows a high reduction degree should be used from the viewpoint of decreased heat loss. This may require the incorporation of multiple burners and solid feeding ports.