Maneuverability and movement stability of the bus train based on three “Bohdan” buses
Open Access
- 27 June 2025
- journal article
- Published by Siec Badawcza Lukasiewicz - Przemyslowy Instytut Motoryzacji in The Archives of Automotive Engineering - Archiwum Motoryzacji
- Vol. 108 (2) , 85-99
Abstract
The paper focuses on selected issues in modern public transport systems, which are increasingly seen as an important means of enhancing safe populations mobility, especially in urban areas suffering from growing traffic congestion. This is facilitated by the introduction of a new bus traffic system "Bus Rapid Transport" (BRT), which is the result of the bus public transport network development. The rolling stock used in the BRT system is of two types: the first one is a classic, two-link or three-link metrobus with an engine that runs on both diesel and gas fuel, as well as a hybrid electro-gas engine. These options are inherent to articulated buses, 18 and 24 meters in length. The second type is a bus train consisting of a bus and one or two trailers, or one or two buses. Therefore, the purpose of the studies is the possibility of creating a bus train based on three “Bohdan” buses. Special attention is paid to the maneuverability and movement stability, taking into account specific bus characteristics in large cities. For this purpose, the bus train consisting of three similar buses mathematical model was improved, with which the maneuverability and movement stability are determined. It was established that during the road train circular movement and the first bus steering wheels turning at the place where trailer links maximum displacement is achieved, the overall traffic lane width will be 6.7 m, which is much less than the permissible one, that is, the maneuverability of a bus train based on three “Bohdan” buses is not a limiting factor for its operation on urban routes.Keywords
This publication has 19 references indexed in Scilit:
- Modular Kinematic Modelling of Articulated BusesIEEE Transactions on Vehicular Technology, 2020
- A predictive path-following controller for multi-steered articulated vehiclesIFAC-PapersOnLine, 2020
- Modular approach to compact low-speed kinematic modelling of multi-articulated urban buses for motion algorithmization purposes2019
- On the Influence of Rear Axle Steering and Modeling Depth on a Model Based Racing Line Generation for Autonomous Racing2018
- Forward tracking of complex trajectories with non-Standard N-Trailers of non-minimum-phase kinematics avoiding a jackknife effectInternational Journal of Control, 2018
- Multi-axle/articulated bus dynamics modeling: a reconfigurable approachVehicle System Dynamics, 2018
- Trajectory tracking control for tractor-trailer vehicles: a coordinated control approachNonlinear Dynamics, 2017
- Nonlinear stability control of autonomous vehicles: a MIMO D2-IBC solutionIFAC-PapersOnLine, 2017
- A Review of Motion Planning Techniques for Automated VehiclesIEEE Transactions on Intelligent Transportation Systems, 2015
- Strength analysis of bus superstructure according to Regulation No. 66 of UN/ECEArchives of Civil and Mechanical Engineering, 2014