RMRoman Marchuk

Roman Marchuk

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Roman Marchuk has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Manoeuvrability and directional stability of three-link road trains type “B-triple”

    by Roman Marchuk, Volodymyr Sakhno, Viktor Poliakov, Mykola Marchuk, Nazar Marchuk, Oleksii Palamarchuk

    Improving the efficiency of freight road transport, in particular container transport, requires changes to the length and full mass of trailer and semitrailer road trains. Accordingly, for three-link layout schemes, the overall dimensions and weight parameters increase, while it is necessary to comply with the requirements for axle loads. Since the regulatory frameworks of many countries require compliance with the axle load, this makes it necessary to increase the number of axles and to extend the road train, which adversely affects its turning performance. Conversely, improving turning performance through the use of steered axles (wheels) on trailers and semitrailers reduces straight-line directional stability. Therefore, to enhance the applicability of such road trains, the option of employing a dual steering drive system for the steered bogie axles of semitrailers is considered. The research methodology involves taking into account folding angles of the road train links, steering drive transmission ratios and accordingly the turning angles of the semitrailers steered axles, which determine the links trajectories displacement and the road train swept path width for different locations of the semitrailer with extended-base and for circular movement of the road train. For a three-link “B-triple” road train with non-steered semitrailers, the swept path width was 11.3 m, which significantly exceeds the permissible value of 7.2 m. Equipping the semitrailers with dual steering drive systems for the rear bogie axles substantially improved manoeuvrability, reducing the swept path width to 9.13 m, however, this value still does not meet regulatory requirements. At the same time, road trains with rear-steered axles (wheels) of the trailer links demonstrate inferior directional stability compared to road trains with front-steered axles (wheels) of the trailer links. To reach a final conclusion regarding the feasibility of a particular road train configuration, further studies on such road trains' directional stability are required.

  • Open Access

    Maneuverability and movement stability of the bus train based on three “Bohdan” buses

    by Roman Marchuk, Volodymyr Sakhno, Ihor Murovanyi, Viktor Poliakov, Svitlana Sharai, Nazar Marchuk

    The paper focuses on selected issues in modern public transport systems, which are increasingly seen as an important means of enhancing safe populations mobility, especially in urban areas suffering from growing traffic congestion. This is facilitated by the introduction of a new bus traffic system "Bus Rapid Transport" (BRT), which is the result of the bus public transport network development. The rolling stock used in the BRT system is of two types: the first one is a classic, two-link or three-link metrobus with an engine that runs on both diesel and gas fuel, as well as a hybrid electro-gas engine. These options are inherent to articulated buses, 18 and 24 meters in length. The second type is a bus train consisting of a bus and one or two trailers, or one or two buses. Therefore, the purpose of the studies is the possibility of creating a bus train based on three “Bohdan” buses. Special attention is paid to the maneuverability and movement stability, taking into account specific bus characteristics in large cities. For this purpose, the bus train consisting of three similar buses mathematical model was improved, with which the maneuverability and movement stability are determined. It was established that during the road train circular movement and the first bus steering wheels turning at the place where trailer links maximum displacement is achieved, the overall traffic lane width will be 6.7 m, which is much less than the permissible one, that is, the maneuverability of a bus train based on three “Bohdan” buses is not a limiting factor for its operation on urban routes.


  • Open Access

    The Influence of Steering Axle Design Parameters and Operational Factors on Tire Steering Resistance Torque

    by Vasyl Mateichyk, Anatolii Soltus, Miroslaw Smieszek, Eduard Klimov, Nataliia Kostian, Liudmyla Tarandushka, Roman Marchuk

    This paper presents the results of the study of the kinematics and dynamics of an elastic steered wheel depending on its state, the kingpin unit design parameters, and the tire characteristics in order to obtain dependencies for calculating the tire steering resistance torque in static state and during movement. It was established that when steering in static state, the locked steered wheel is taken as a complex mechanism, and the tire contact patch is rotated about the kingpin axis–support surface intersection point. When turning the unlocked steered wheel, it was determined that the tire contact patch participates in transport and relative motions. The transport motion center is the projection onto the support surface of the center of rotation of the wheel about the kingpin axis. The relative motion center is within the contact patch and is determined experimentally. For both states of the steered wheel, analytical dependencies were obtained for determining the tire steering resistance torque. The results of the analytical studies were experimentally verified on a bench equipped by components and aggregates of a truck, and included an additional rigid false wheel and a special rim. The false wheel made it possible to experimentally determine the tire contact patch transport motion center, and the special rim—to change the knuckle length in the range of 0.22–0.82 m.


  • Open Access

    To determine the maneuverability of three-link road trains type “B-triple” with steered axles of semi-trailers dollies

    by Roman Marchuk, Volodymyr Sakhno, Igor Murovanyi, Oleksandr Razboinikov, Volodymyr Bosenko, Nazar Marchuk

    In recent years, the development of container transportation served as a powerful impetus for increasing the length of vehicles, especially road trains, which is due to a number of advantages regarding the transportation of large-sized freight in a container. Today, the whole range of containers is transported by two-link road trains consisting of a tractor vehicle and semi-trailer. The efficiency of such transportation can be increased by means of three-link road trains capable of transporting either three (two 20-foot and one 40- or 45-foot) or four 20-foot containers. This organization of transportation will lead to energy savings and a reduction in environmental pollution due to the reduction of vehicles. However, there is a problem with the maneuverability and stability of such vehicles. The paper developed a kinematic model of three-link road train type “B-triple” with steered axles (front or rear) of semi-trailer dolly with a dual drive control for these axles. Based on folding angles of road train links and drive control transmission ratios of the axles of semi-trailer dolly, the main indicators of road train maneuverability are determined – road train links trajectories displacement relative to the vehicle trajectory and road train overall traffic lane. It was established that when entering a turn with slight differences in folding angles of road train links, the steered axles of semi-trailer dolly turn in the direction opposite to the direction of a turn, thereby reducing the overall traffic lane. During circular motion, the overall traffic lane of road train with steered semi-trailers decreased by almost 2 m, but such road train does not meet the maneuverability requirements. The search for ways to improve the maneuverability of three-link road trains should be sought in the designs of three-link road trains.


  • Open Access

    To determine the stability of the metrobus in unstable driving modes

    by Roman Marchuk, Nazar Marchuk, Volodymyr Sakhno, Viktor Poliakov

    Recently in many cities of the world began to introduce so-called «metrobus» or BRT (Bus Rapid Transit) systems, which became a cheaper alternative to the metro and other rail transport, in particular trams. The aim of the work is to determine the stability indicators of the metrobus in the transitional traffic modes, in particular when performing such manoeuvres as «steering wheel jerk» and «shuffle». For this purpose, the equations of metrobus plane-parallel motion are supplemented by equations of the links of the road train in the vertical plane by halopilation (tangage, trim) and roll.The critical straight-line speed of the three-link metrobus has been determined, which was 32,06 m/s, and this speed is independent of the corners of the steering wheels of the bus and the trailer links.It has been shown that as the steering wheel angle of the bus increases, the difference in the folding angles of the bus increases, with the second folding angle significantly exceeding the first, especially considering the roll of the metrobus body. It has been established that the greatest rolls and loads of the metrobus axles are those of the last trailer, which is the limiting factor for the critical speed. The lateral accelerations of individual metrobus links and their yaw velocity when performing the manoeuvre «steering wheel jerk» and «shuffle, Sl = 24 m», show that both the bus and the second trailer link are a limiting factor when performing various manoeuvres, but the acceleration value does not exceed the permissible 0,4g, so its stability under these conditions is ensured.


  • Open Access

    Research of a Truck Train Movement when Driving Semitrailer by Slowdowning of Wheels of One Axis Pin on the Model

    by V. P. Sakhno, D. M. Yashchenko, R. M. Marchuk, N. M. Marchuk, O. L. Lyashuk

    A free-running model of a truck train, which simulates a truck train consisting of a tow truck MAN TGS 19.360 and a biaxial semitrailer Utility VS2DС with a steerable front axis, has been developed. A semitrailer model is active with the wheel drive enables to control its movement by slow downing one of the wheels. The model was equipped with all necessary control equipment. It proved that driving a semitrailer by slow downing one of its wheels is identical to driving a semitrailer front axis with direct drive and a driver transmission ratio of 0.5. Differences in all cases have not exceeded 12% that is slowingdown one of the wheels of a semitrailer is reasonable for driving a truck train with a long base semitrailer.