Hydration Performance of Magnesium Potassium Phosphate Cement Using Sodium Alginate as a Candidate Retarder
Open Access
Abstract
Retarders are important factors controlling the hydration and properties of magnesium potassium phosphate cements (MKPCs). Boric acid and borax are the most commonly used retarders for MKPC which could control the setting time in a wide range upon changing their content. However, with the increase in borax content, the early strength of MKPC can be reduced, and boron compounds are now included in the EU candidate list of substances of very high concern for authorization, due to their reproductive toxicity. Exploring alternative set retarders to boron compounds is, thus, of significance. This work investigated the effects of a candidate retarder, namely, sodium alginate, on the setting time, mechanical properties, hydration products, and microstructures of MKPC. Sodium alginate presented dramatically retarding effects on MKPCs in the range of 0% to 2% (by mass of water). One percent of sodium alginate by mass of water could extend the setting time of MKPCs from 15 min to 35 min, which presented a better retarding effect than borax (a typical retarder for MKPCs) and produced higher early strength of MKPCs. Adding no more than 1% of sodium alginate did not have a notably adverse effect on the formation of hydration product over the long term, but an unfavorable effect could be found regardless of the sodium alginate content, which could reduce the compressive strength of MKPCs.Keywords
Funding Information
- National Natural Science Foundation of China (No.51902212)
This publication has 27 references indexed in Scilit:
- Magnesia-Based Cements: A Journey of 150 Years, and Cements for the Future?Chemical Reviews, 2016
- Effect of early hydration temperature on hydration product and strength development of magnesium phosphate cement (MPC)Cement and Concrete Research, 2015
- Characterisation of magnesium potassium phosphate cements blended with fly ash and ground granulated blast furnace slagCement and Concrete Research, 2015
- Effects of fly ash, retarder and calcination of magnesia on properties of magnesia–phosphate cementAdvances in Cement Research, 2015
- Influence of magnesia-to-phosphate molar ratio on microstructures, mechanical properties and thermal conductivity of magnesium potassium phosphate cement paste with large water-to-solid ratioCement and Concrete Research, 2015
- Experimental study of phosphate salts influencing properties of magnesium phosphate cementConstruction and Building Materials, 2014
- Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and applicationJournal of Porous Materials, 2013
- Factors that affect the properties of magnesium phosphate cementConstruction and Building Materials, 2013
- Alginate: Properties and biomedical applicationsProgress in Polymer Science, 2012
- Setting and strength development of magnesium phosphate cement pasteAdvances in Cement Research, 2009