An Enhanced One-Port Waveguide Method for Sheet Resistance Extraction
- 17 December 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 62 (5) , 1822-1829
Abstract
In this article, a simple and accurate method is proposed to extract the sheet resistance of a thin conductive film by using the enhanced one-port waveguide in a microwave frequency. A shorted quarter-wavelength waveguide is supplemented to the main waveguide as its open boundary to ensure the TE $_{10}$ mode during the measurement. Unlike the available waveguide with the metal flange, the dielectric flange of the shorted quarter-wavelength waveguide is proposed to eliminate the transverse electromagnatic (TEM) wave propagation and leakage in the gap between two waveguide flanges. The conductive film deposited on the substrate is attached to the main waveguide flange, and the equivalent circuit model is generated thereof. By measuring S $_{11}$ parameters of the bare substrate and conductive film with the substrate, respectively, the unknown sheet resistance of the conductive film can be easily extracted. Even a large sheet resistance could be measured accurately. Both numerical and measurement results are presented for effectiveness validation of the proposed method. In comparison with the available dual-port method and waveguide with the metal flange method, the dielectric flange raises the measurement accuracy sharply in aspects of substrate thickness, substrate materials, and sheet resistance.
Keywords
Funding Information
- National Natural Science Foundation of China (61871467)
- Natural Science Foundation of Zhejiang Province (LGG18F010002)
This publication has 18 references indexed in Scilit:
- An Accurate Method for Measuring the Sheet Impedance of Thin Conductive Films at Microwave and Millimeter-Wave FrequenciesIEEE Transactions on Microwave Theory and Techniques, 2017
- Electromagnetic Shielding Effectiveness of Layered Polymer NanocompositesIEEE Transactions on Electromagnetic Compatibility, 2017
- Notice of Retraction: Analysis of Near-Field Shielding Effectiveness for the SiP ModuleIEEE Transactions on Electromagnetic Compatibility, 2017
- Efficient Methods of Measuring Shielding Effectiveness of Electrically Large Enclosures Using Nested Reverberation Chambers With Only Two AntennasIEEE Transactions on Electromagnetic Compatibility, 2017
- Tunable Microwave Absorber Based on Patterned GrapheneIEEE Transactions on Microwave Theory and Techniques, 2017
- Shielding Effectiveness Estimation of a Metallic Enclosure With an Aperture Using S-Parameter Analysis: Analytic Validation and ExperimentIEEE Transactions on Electromagnetic Compatibility, 2016
- Metallic Ni, Cu, and Ag Dispersed on Expanded Graphite for Radiation ShieldingIEEE Transactions on Electromagnetic Compatibility, 2016
- A non-contact graphene surface scattering rate characterization method at microwave frequency by combining Raman spectroscopy and coaxial connectors measurementCarbon, 2014
- Surface Impedance Measurement of Resistive Coatings at Microwave FrequenciesIEEE Transactions on Instrumentation and Measurement, 2012
- A Novel Method for Determining the R-Card Sheet Impedance Using the Transmission Coefficient Measured in Free-Space or Waveguide SystemsIEEE Transactions on Instrumentation and Measurement, 2009