Voltage Dependent Barrier Height, Ideality Factor and Surface States in Au/(NiS-PVP)/n-Si (MPS) type Schottky Barrier Diodes
- 1 June 2021
- journal article
- research article
- Published by Igdir University in Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 11 (2) , 1058-1067
Abstract
Metal-Polymer-Semiconductor (MPS) Schottky Barrier Diodes (SBD) were manufactured and their basic electrical parameters were obtained by the measurement of the forward and reverse bias current-voltage (I-V) in the wide bias voltage range (±3V) to determine the voltage dependent effects on Nickel-Sulphur (NiS) doped Poly Vinyl Pyrrolidone (PVP) polymer interlayer. The saturation current (I0), zero-bias barrier height (ΦB0), rectifying rate (RR), ideality factor (n) and the real value of series - shunt resistances (Rs - Rsh) were calculated. The voltage dependent profile of n (V), ΦB(V), and Rs (V) were derived. The forward bias ln I-V plot of the MPS type SBD indicates a good rectifier behaviour and it has two distinctive linear parts with different slopes which correspond to low (0.288 ≤V ≤0.625 V) and moderate (0.672 ≤ V ≤ 0.960 V) bias voltages and then deviates from linearity due to Rs and interlayer at high forward bias voltages. Energy dependent profile of Nss was obtained from the forward bias I-V data by considering voltage dependent barrier height (ΦB) and n. Nss plot represents U-shape behaviour in the forbidden bandgap. The mean value of Nss was found at about 7.0x1012 eV-1 cm-2 and this value is in the acceptable limit for a semiconductor device and such lower values of Nss are the consequences of the passivation effect on the surface states.Keywords
This publication has 22 references indexed in Scilit:
- Comparative study of the electrical properties of Au/n-Si (MS) and Au/Si3N4/n-Si (MIS) Schottky diodesChinese Physics B, 2013
- Two diodes model and illumination effect on the forward and reverse bias I–V and C–V characteristics of Au/PVA (Bi-doped)/n-Si photodiode at room temperatureCurrent Applied Physics, 2013
- Role of molecular weight of atactic poly(vinyl alcohol) (PVA) in the structure and properties of PVA nanofabric prepared by electrospinningJournal of Applied Polymer Science, 2004
- Recent advances in Schottky barrier conceptsMaterials Science and Engineering: R: Reports, 2001
- Formation of an electric dipole at metal-semiconductor interfacesPhysical Review B, 2001
- Electrical transport characteristics of Au/n-GaAs Schottky diodes on n-Ge at low temperaturesSolid-State Electronics, 2001
- Correlation between barrier height and interface structure of Schottky diodesSurface Science, 1995
- Influence of barrier inhomogeneities on noise at Schottky contactsApplied Physics Letters, 1990
- Generalized Norde plot including determination of the ideality factorJournal of Applied Physics, 1986
- Extraction of Schottky diode parameters from forward current-voltage characteristicsApplied Physics Letters, 1986