Preparation of silicon carbide/carbon fiber composites through high-temperature spark plasma sintering
Authors:
- Ehsan GhasaliEGEhsan Ghasali
- Masoud AlizadehMAMasoud Alizadeh
Open Access
- 1 December 2017
- journal article
- Published by Taylor & Francis in Journal of Asian Ceramic Societies
- Vol. 5 (4) , 472-478
Abstract
This study discusses the potentials of spark plasma sintering (SPS) integrated with high temperature process that can enable sintering of SiC/Cf composites without any sintering aids. The random distribution of carbon fibers was obtained through mixing composite components in ethanol by using a shaker mill for 10 min. The corresponding sintering process was carried out at 1900 and 2200 °C with 50 MPa pressure applied at maximum temperature. The results showed that 89 ± 0.9 and 97 ± 0.8% of the theoretical density can be obtained for sintering temperatures of 1900 and 2200 °C, respectively. The densification curves were plotted to monitor sintering behavior with punch displacement changes. The appropriate bonding between SiC particles and carbon fibers was detected using FE-SEM for sample which was sintered at 2200 °C. The clear maximum in hardness (2992 ± 33 Vickers), bending strength (427 ± 26 MPa) and fracture toughness (4.2 ± 0.3 MPa m1/2) were identified for sample sintered at 2200 °C. XRD investigations supposed that SiC and carbon were the only crystalline phases in both sintered samplesKeywords
This publication has 28 references indexed in Scilit:
- Liquid-phase assisted spark-plasma sintering of SiC nanoceramics and their nanocomposites with carbon nanotubesJournal of the European Ceramic Society, 2017
- Functionally graded materials: A review of fabrication and propertiesApplied Materials Today, 2016
- WC-Co Particles Reinforced Aluminum Matrix by Conventional and Microwave SinteringMaterials Research, 2015
- WC–Si3N4 composites prepared by two-step spark plasma sinteringInternational Journal of Refractory Metals and Hard Materials, 2015
- Low‐Temperature Spark Plasma Sintering of Pure Nano WC PowderJournal of the American Ceramic Society, 2013
- Cemented carbide phase diagrams: A reviewInternational Journal of Refractory Metals and Hard Materials, 2011
- A Review of the Application of C/SiC Composite in Thermal Protection SystemMultidiscipline Modeling in Materials and Structures, 2009
- Carbon Fibre Reinforced Silicon Carbide Composites (C/SiC, C/C-SiC)2005
- Ceramic Matrix Composites1998
- Processing of Refractory Carbides and Nitrides (Coatings)1996