The Influence of thickness on residual flexural strength of composite with low-velocity impact damages: Experimental study
Open Access
- 15 December 2021
- journal article
- Published by PNRPU Publishing House in PNRPU Mechanics Bulletin
- No. 3,p. 6-11
Abstract
Assessment of the residual strength of composite structural elements that can be subjected to low-velocity impact during operation is still a vital engineering problem. Its solution requires not only the understanding of the basic mechanisms of energy dissipation in composites but, the study of factors affecting the impact resistance of the material. The thickness is one of the main parameters that affects the mechanical behaviour of the composite at low-velocity impacts and, as a consequence, its residual strength. This paper presents the experimental study of the material thickness and impact energy influence on the residual flexural strength of woven glass fibre-reinforced plastic specimens. At the first stage of the study, low-velocity impact tests with different impact energies on GFRP plate specimens with the thickness of 2 mm, 4 mm, and 6 mm were carried out. At the second stage, the beam specimens were cut out from the plate specimens with impact damages, and three-point bending tests were carried out. The dependencies of the residual flexural strength were obtained at various impact energies for all specimen thicknesses. The sensitivity of the Flexure-After-Impact test protocol to the delamination and fibre damages in the composite specimens were assessed.Keywords
This publication has 17 references indexed in Scilit:
- An experimental study of the damage growth in composite laminates under tension–fatigue after impactComposites Science and Technology, 2020
- Flexure and flexure-after-impact properties of carbon fibre composites interleaved with ultra-thin non-woven aramid fibre veilsComposites Part A: Applied Science and Manufacturing, 2020
- Scaling effects of composite laminates under out-of-plane loadingComposites Part A: Applied Science and Manufacturing, 2019
- Comparison of Compression-After-Impact and Flexure-After-Impact protocols for 2D and 3D woven fiber-reinforced compositesComposites Part A: Applied Science and Manufacturing, 2017
- Low-velocity impact tests on carbon/epoxy composite laminates: A benchmark studyComposites Part B: Engineering, 2016
- Effects of interply hybridization on the damage resistance and tolerance of composite laminatesComposite Structures, 2014
- Impact Damage to Composite Laminates: Effect of Impact LocationApplied Composite Materials, 2014
- Low velocity impact induced damage evaluation and its effect on the residual flexural properties of pultruded GRP compositesComposite Structures, 2007
- Review of low-velocity impact properties of composite materialsComposites Part A: Applied Science and Manufacturing, 1996
- The impact resistance of composite materials — a reviewComposites, 1991