Fatigue Crack Growth from Notches: A Numerical Analysis
Open Access
- 17 June 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (12) , 4174
Abstract
A numerical approach based on plastic crack tip opening displacement (CTOD) was followed to study fatigue crack growth (FCG) from notches. The identification of fundamental mechanisms was made considering notched and unnotched models, with and without contact of crack flanks. Different parameters were studied, namely, notch radius, crack length, stress state, and material. The notch increases the plastic CTOD, and therefore fatigue crack growth rate, da/dN, as expected. The reduction of notch radius increases da/dN but reduces the notch affected zone. Ahead of the notch affected zone, da/dN increases linearly with crack growth, with a rate that increases linearly with the plastic CTOD. The crack closure phenomenon has a dramatic effect under plane stress conditions but a limited effect on plane strain conditions. In the former case, the contact of crack flanks reduces substantially the effect of notch radius and the size of the notch affected zone. These trends are associated with the increase of crack closure level with notch radius. The material does not affect the global trends, but the reduction of yield stress increases the level of plastic deformation and therefore da/dN. The effect of material, and also of stress state, is mainly associated with crack closure.Keywords
Funding Information
- European Regional Development Fund (project no. 028789)
- Foundation for Science and Technology IP/MCTES (CENTRO-01-0145-FEDER-028789)
This publication has 34 references indexed in Scilit:
- Recent advances on notch effects in metal fatigue: A reviewFatigue & Fracture of Engineering Materials & Structures, 2020
- A single edge notch specimen for fatigue, creep-fatigue and thermo-mechanical fatigue crack growth testingEngineering Fracture Mechanics, 2018
- Fatigue crack initiation at a notchInternational Journal of Fatigue, 2011
- Stress intensity factors for cracks emanating from two‐dimensional semicircular notches using the composition of SIF weight functionsFatigue & Fracture of Engineering Materials & Structures, 2005
- ESTIMATIONS OF STRESS INTENSITY FACTORS FOR SMALL CRACKS AT NOTCHESFatigue & Fracture of Engineering Materials & Structures, 1991
- Fatigue crack growth at stress concentrations—the role of notch plasticity and crack closureEngineering Fracture Mechanics, 1988
- Fatigue crack growth from sharp notchesInternational Journal of Fatigue, 1985
- PROPAGATION AND NON‐PROPAGATION OF SHORT FATIGUE CRACKS AT A SHARP NOTCHFatigue & Fracture of Engineering Materials & Structures, 1983
- NOTCHED MEMBER FATIGUE LIFE PREDICTIONS COMBINING CRACK INITIATION AND PROPAGATIONFatigue & Fracture of Engineering Materials & Structures, 1979
- Fatigue from notches in cast steelsMetal Science, 1977