Bio‐based PA56/GO nanocomposite fiber with 1.2 GPa strength via in situ precipitation and solvent‐free polymerization
Authors:
- 26 March 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (9) , 8374-8388
Abstract
Toward high‐strength bio‐based polyamide 56 (PA56) fiber, we first in situ precipitate graphene oxide (GO), adipic acid and 1,5‐pentanodiamine together by reaction crystallization in ethanal to obtain PA56 salt/GO particles with well dispersed GO, then prepare PA56/GO nanocomposite with PA56 salt/GO via solvent‐free polymerization including solid‐state prepolycondensation and melt polycondensation. Finally, PA56/GO nanocomposite fiber is prepared by extrusion drawing. With 0.2 wt% GO, the tensile strength of PA56/GO fiber reaches 1050 MPa, which is 3.3 times that of pure PA56 fiber. Furtherly, we add PA56/GO with high GO content to commercial PA56 to prepare the hybrid fiber, of which the tensile strength reaches 1248 MPa. The great improvement is mainly due to the good dispersion of GO in the whole process, which increases the heterogeneous nucleation in favor of higher and oriented PA56 crystallization.Highlights: Bio‐based PA56/GO nanocomposite fiber with 1.2 GPa strength has been prepared. PA56 salt/GO particles with well‐dispersed GO are in situ precipitated. Solvent‐free polymerization is used instead of solution melt polymerization. Well‐dispersed GO results in high and oriented crystallinity of PA56/GO fiber. Tensile strength of PA56/GO fiber is 2.3 times that of commercial PA56 fiber.Keywords
Funding Information
- National Key Research and Development Program of China
- Jiangsu Provincial Key Research and Development Program (BE2018008‐1)
This publication has 59 references indexed in Scilit:
- Mechanism Study of the Polymerization of Polyamide 56: Reaction Kinetics and Process ParametersMacromolecular Rapid Communications, 2023
- Influence of drawing and annealing on the structure and properties of bio‐based polyamide 56 fibersJournal of Applied Polymer Science, 2022
- Enhancement of physical and mechanical properties of polyamide 66 fibers using polysiloxane‐functionalized multi‐walled carbon nanotubesJournal of Applied Polymer Science, 2020
- The structures and properties of bio‐based polyamide 56 fibers prepared by high‐speed spinningJournal of Applied Polymer Science, 2020
- Crystallization of polyamide 56/polyamide 66 blends: Non‐isothermal crystallization kineticsJournal of Applied Polymer Science, 2018
- Chemistry with Graphene and Graphene Oxide—Challenges for Synthetic ChemistsAngewandte Chemie International Edition, 2014
- Applying the Traditional Solution Melt Polymerization for the in situ Intercalation of Polyamide 6.6‐Clay NanocompositesMacromolecular Materials and Engineering, 2011
- Crystallization kinetics and melting behavior of nylon 10,10 in nylon 10,10–montmorillonite nanocompositesJournal of Applied Polymer Science, 2003
- Intrinsic viscosity and molecular weight measurement of nylon 66 polymersJournal of Applied Polymer Science, 1992
- Détermination de la viscosité intrinsèque de solutions de polymères par une simple détermination de la viscositéJournal of Applied Polymer Science, 1962