Improved Oil Recovery in Eagle Ford and Wolfcamp Shales using Surfactant-Based Chemical Blend and Supercritical CO2: An Experimental Investigation
- 1 November 2026
- journal article
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- p. 1-13
Abstract
Summary: Enhanced oil recovery (EOR) in unconventional shale reservoirs is significantly influenced by capillary forces, heterogeneous pore structures, and surface chemistry, which depends on mineralogy. The Eagle Ford (EF) and some sections of the Wolfcamp (WC) shales are calcite-dominant, where anionic surfactant mechanisms developed for clay/silicate-rich formations may not be optimal. This study evaluates an EOR strategy that integrates a nonionic alkyl polyglucoside (APG) chemical blend (CB) with supercritical CO2 under near-miscible huff-and-puff (HnP) conditions at 176°F and 3,000 psig pressure. Unlike previous research on Mancos shale utilizing anionic formulations, this investigation explores wettability alteration induced by nonionic adsorption in calcite-rich shale. Interfacial tension (IFT) measurements showed a reduction from 20.5 to approximately 1 mN/m, representing moderate IFT reduction rather than ultralow values. Contact angle (CA) measurements demonstrated wettability alteration toward water-wet conditions, which is critical in tight shales, where the capillary pressure is strongly controlled by CA effects. Nuclear magnetic resonance (NMR) transverse relaxation time (T2) analysis was used to evaluate pore-scale recovery mechanisms. The results indicate that macropore-associated domains are the primary contributors to oil production. However, the APG_CB and CO2 combination generates additional depletion in short-T2 (micropore) regions relative to brine or CO2-only injection. The results of spontaneous imbibition (SI) in WC shales support the findings related to oil recovery driven by wettability alteration and moderate IFT reduction, with APG_CB achieving an ultimate recovery of 22%, while brine resulted in 6% recovery. In the EF shale, the combination of CO2 and APG_CB enhanced the ultimate liquid recovery of HnP from 33.8% (brine + CO2) to 44.3% under similar conditions. These findings indicate that nonionic APG_CB improves oil recovery in carbonate-rich shales, where the use of anionic surfactants may result in chemical losses. Furthermore, the study revealed that chemically assisted CO2 HnP can partially extract oil associated with micropores, although macropores significantly contribute to the oil production observed at laboratory timescales.Keywords
This publication has 40 references indexed in Scilit:
- A review of chemical methods and testing techniques for enhanced oil recovery in shale reservoirsFuel, 2025
- Evaluation of CO2 enhanced oil recovery in unconventional reservoirs: Experimental parametric study in the BakkenFuel, 2022
- First-principles prediction of critical micellar concentrations for ionic and nonionic surfactantsJournal of Colloid and Interface Science, 2022
- Enhanced oil recovery from fractured carbonate reservoirs using nanoparticles with low salinity water and surfactant: A review on experimental and simulation studiesAdvances in Colloid and Interface Science, 2021
- Alkyl polyglycoside: a green and efficient surfactant for enhancing heavy oil recovery at high-temperature and high-salinity conditionJournal of Petroleum Exploration and Production Technology, 2019
- Current understanding of shale wettability: A review on contact angle measurementsEarth-Science Reviews, 2018
- Advances in improved/enhanced oil recovery technologies for tight and shale reservoirsFuel, 2017
- Experimental investigation of CO2-oil interactions in tight rocks: A Montney case studyFuel, 2017
- Mechanism of calcite wettability alteration by alkyl polyglucosideColloids and Surfaces A: Physicochemical and Engineering Aspects, 2016
- On the measurement of critical micelle concentrations of pure and technical‐grade nonionic surfactantsJournal of Surfactants and Detergents, 2000