MBMatthew Thomas Balhoff

Matthew Thomas Balhoff

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Matthew Thomas Balhoff has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Improved Oil Recovery in Eagle Ford and Wolfcamp Shales using Surfactant-Based Chemical Blend and Supercritical CO2: An Experimental Investigation

    by Gideon Dordzie, Matthew T Balhoff

    Summary: Enhanced oil recovery (EOR) in unconventional shale reservoirs is significantly influenced by capillary forces, heterogeneous pore structures, and surface chemistry, which depends on mineralogy. The Eagle Ford (EF) and some sections of the Wolfcamp (WC) shales are calcite-dominant, where anionic surfactant mechanisms developed for clay/silicate-rich formations may not be optimal. This study evaluates an EOR strategy that integrates a nonionic alkyl polyglucoside (APG) chemical blend (CB) with supercritical CO2 under near-miscible huff-and-puff (HnP) conditions at 176°F and 3,000 psig pressure. Unlike previous research on Mancos shale utilizing anionic formulations, this investigation explores wettability alteration induced by nonionic adsorption in calcite-rich shale. Interfacial tension (IFT) measurements showed a reduction from 20.5 to approximately 1 mN/m, representing moderate IFT reduction rather than ultralow values. Contact angle (CA) measurements demonstrated wettability alteration toward water-wet conditions, which is critical in tight shales, where the capillary pressure is strongly controlled by CA effects. Nuclear magnetic resonance (NMR) transverse relaxation time (T2) analysis was used to evaluate pore-scale recovery mechanisms. The results indicate that macropore-associated domains are the primary contributors to oil production. However, the APG_CB and CO2 combination generates additional depletion in short-T2 (micropore) regions relative to brine or CO2-only injection. The results of spontaneous imbibition (SI) in WC shales support the findings related to oil recovery driven by wettability alteration and moderate IFT reduction, with APG_CB achieving an ultimate recovery of 22%, while brine resulted in 6% recovery. In the EF shale, the combination of CO2 and APG_CB enhanced the ultimate liquid recovery of HnP from 33.8% (brine + CO2) to 44.3% under similar conditions. These findings indicate that nonionic APG_CB improves oil recovery in carbonate-rich shales, where the use of anionic surfactants may result in chemical losses. Furthermore, the study revealed that chemically assisted CO2 HnP can partially extract oil associated with micropores, although macropores significantly contribute to the oil production observed at laboratory timescales.

  • Permeability Reduction and Oil Recovery Improvement from In-Situ Precipitation of Calcium Carbonate from Calcium Hydroxide in Heterogeneous Cores

    by Christian E. Willoughby, Matthew T. Balhoff, David A. DiCarlo

    Summary: Conformance control is an important part of improved oil recovery/enhanced oil recovery (EOR) operations to prevent injected fluid from cycling through high-permeability structures. The focus of this paper is on studying in-situ precipitation of calcium carbonate (CaCO3) via reaction between carbon dioxide (CO2) and calcium hydroxide (Ca(OH)2) to block high-permeability structures in coreflood experiments. Two sets of experiments were performed: two-phase experiments with CO2 and brine that primarily measured permeability reduction and three-phase experiments with CO2, brine, and oil that primarily measured improvement in oil recovery in artificially fractured cores. Experiments utilized ~2.9-in.-diameter × 11-in.-length Berea sandstone, Texas Cream limestone, and Indiana limestone outcrop cores, some containing planar artificial fractures. It was found that precipitation was most effective in reducing permeability in dual-permeability (artificially fractured and composite) cores than in single-permeability cores. Significant improvements in oil recovery were observed when precipitation blocked fractures and redirected flow into the oil-filled matrix. Producing oil cut increased from 0–8% to 25–50%. However, precipitation was found to be unstable (dislodged during injection) when higher pressures built up behind it. Additionally, larger fractures required multiple precipitation cycles to be blocked, as the width to bridge the fracture was too much for a single precipitation cycle to overcome. Overall, this conformance control method may be best for reservoirs with narrow natural fractures or thin high-permeability streaks that do not connect directly to production wells.

  • Open Access

    A Perspective Review on Nanoparticles as Mitigating Agents for Surfactant Retention in Enhanced Oil Recovery

    by Lucas Rego Barros Rebello, João Victor Nicolini, Helen Conceição Ferraz, Matthew Thomas Balhoff, Yingda Lu


  • In-Situ Precipitation of Calcium Carbonate during Carbon Dioxide Injection in Micromodels

    by Christian E. Willoughby, Matthew T. Balhoff, David A. DiCarlo

    Summary: Conformance control is a necessary part of enhanced oil recovery (EOR) operations in heterogeneous oil fields. However, many techniques center on near-wellbore conformance or are not well-suited for low matrix permeability formations. We propose the injection of calcium hydroxide (Ca(OH)2) and carbon dioxide (CO2) as a novel conformance control strategy in reservoirs that experience poor sweep efficiency due to heterogeneity. These two chemical agents react to precipitate solid calcium carbonate (CaCO3), potentially blocking already-swept pores and directing injected fluids to unswept regions of the reservoir. Microfluidic devices (micromodels) were used to perform experiments to observe the fundamental, pore-scale behavior of this reaction in porous media. Precipitation grain size, location, and relative quantity were directly observed while changing injection order, CO2 state, and injection rate. It was found that the reaction took place in porous media for both states of CO2 [gaseous and dissolved in deionized (DI) water]. More precipitate formed during experiments in which gaseous CO2 was used compared with when CO2 was dissolved in water. Overall, precipitation occurred where the reactants both contacted each other and mixed, which did not have a preference for high- or low-permeability zones. Precipitation via this method was controlled through CO2 placement in the reservoir and injection rate, as the reaction only occurred where CO2 and Ca(OH)2 were both present and had sufficient convective mixing. Precipitation was also shown to block pore throats and reduce permeability in 2.5-darcy micromodels. This study is a first look at this novel conformance control process and will be used to develop future core-scale experiments.


  • A Reduced-Dimension Solution for Spatial Modeling of Tracer Transport in Single-Well Tracer Tests

    by Moises Velasco-Lozano, Matthew T. Balhoff

    Summary: Modeling tracer transport in petroleum reservoirs is an important technique for accurately estimating residual oil saturation, characterizing high-conductivity pathways, and determining well connectivity. Single-well tracer tests (SWTTs) are essential for evaluating the sweep efficiency of conventional and enhanced oil recovery (EOR) methods, as they allow for the rapid quantification of oil displacement near the injector well, thereby assessing both technical and economic aspects before implementing a field-scale recovery plan. However, current methods for examining SWTTs rely on time-consuming numerical simulations that require significant expertise. In this work, we introduce a novel 2D solution for modeling the flow of chemical tracers in SWTTs during the tracer push stage, representing the first mathematical approach that enables real-time, field-scale tracer transport modeling. Our model is derived through the analysis of tracer flow in porous media, utilizing a key transformation variable to convert the classic 2D differential equation into a reduced-order expression equivalent to solute transport in single-phase flow. This mathematical approach incorporates an approximated full hydrodynamic dispersivity term to account for mechanical and molecular dispersion mechanisms, resulting in an accurate estimation of tracer advance in the x- and y-directions as a function of the steady-state velocity field. We validated our 2D solution by comparing it against multiple numerical SWTT simulations under conditions of residual oil saturation, demonstrating that the model achieves a difference of less than 3 ft in estimating the location of tracer slugs. Our approach provides a practical, real-time tool for approximating tracer flow and location in the reservoir, significantly reducing the number of initial simulations required to evaluate tracer properties before building robust reservoir models for heterogeneous systems. We believe that this model is a valuable tool for rapid tracer transport analysis and enhances the efficiency of field-scale recovery planning.


  • Convolutional Neural Networks to Estimate Residual Oil Saturation Through Partitioning Interwell Tracer Tests

    by Moises Velasco-Lozano, Matthew T. Balhoff

    Summary: Modeling of chemical tracers represents one of the most powerful dynamic tools for reservoir characterization and estimation of oil saturation. However, the continuous monitoring during long times in partitioning interwell tracer tests (PITTs), which extend to months or years in some field tests, limits the use of this technology. The large distance between wells and high partitioning coefficients are some of the main reasons for the slow production of tracers, where time-consuming numerical simulations are required to analyze the tracer data in reservoir models before field applications. Therefore, this work presents an innovative machine-learning (ML) workflow using convolutional neural networks (CNNs) for the estimation of residual oil saturation (Sor) based on the generation of partitioning tracer responses in heterogeneous media. To train the CNN model, a Python-based algorithm was developed to generate permeability and porosity fields providing significant information about the behavior of tracer production data. The CNN model was trained with extensive ideal and partitioning tracer profiles generated from PITTs in reservoirs under Sor using numerical simulations with the UTCHEM software (UTCHEM 2019). The response feature in the CNN model corresponds to partitioning tracer profiles obtained from ideal concentration curves to analyze the tracer arrival delay caused by the volume of oil remaining in the reservoir. Numerical case studies and field data were examined to show the applicability of the CNN model developed under multiple flow conditions, where the estimation of Sor is based on a trial-and-error method to match the early partitioning tracer response, which is a simple process since the only unknown is Sor. In most cases, the partitioning tracer responses were properly estimated from ideal tracer data, resulting in a difference of less than ±0.02 compared with the value of Sor calculated. Thus, we show that CNNs represent potential methods for predicting the concentration behavior as a function of early tracer data measured. The work presented is designed to be a starting point for the development of novel ML algorithms for interpreting tracer tests in reservoirs.


  • Open Access

    Modeling of Chemical Tracers for Two-Phase Flow in Advective-Dominated Porous Media at Core Scale

    by Moises Velasco-Lozano, Matthew T. Balhoff, Luis E. Diaz-Paulino, Simon Lopez-Ramirez, Ramiro Galvan-Castro

    Summary: Chemical tracer modeling in porous media plays a key role in subsurface applications including oil recovery, aquifer remediation, and geothermal energy production. In oil reservoirs, chemical tracers are critical to quantifying the remaining oil saturation in porous media after displacing processes, enabling the correct evaluation of the sweep efficiency of recovery methods at the field scale. Even though the transport of solutes under single-phase flow has been modeled extensively with numerous solutions, there are no existing mathematical approaches to examine the displacement of solutes in two-phase flow conditions. Therefore, we present in this research work the first analytical solutions derived to model the transport of ideal and partitioning tracers in porous media with mobile water and oil phases. The models presented are derived from the classic study of fluid displacement by viscous forces and the analysis of dynamic phase distribution in porous media, where key transformation variables are introduced to simplify the nonlinear advection-dispersion equation (ADE) into a conventional partial differential expression. In our derivation process, it is recognized that the dispersion effect can be superimposed onto an ideal concentration front via a singular perturbation expansion, resulting in practical solutions that do not require complex numerical calculations or inversion methods. The solutions derived are verified with numerical simulations and validated with experimental data under different flow conditions for the transport of ideal and partitioning tracers, demonstrating that the complex mechanisms of hydrodynamic dispersion, partitioning, and adsorption are accurately modeled under two-phase flow. Thus, our solutions can be used to rapidly evaluate tracer transport under the existing flow conditions in porous media, significantly reducing the number of experiments and simulations to characterize and select the correct tracer to be used in field applications.


  • Emergence of Power-Law Particle Size Distribution in Microfluidic Calcium Carbonate Precipitation: An Extended Yule Process with a Ripening Effect

    by Jianping Xu, Matthew T. Balhoff

    Precipitation of calcium carbonate in bulk solutions is well known to result in a bell-shaped or bimodal particle size distribution. However, it is unclear how the distribution behaves if precipitation occurs in a small, confined volume. In this Letter, we conduct microfluidic experiments where sodium carbonate and calcium chloride solutions are continuously injected into a microchannel to precipitate calcium carbonate particles. Results show that, regardless of the variations in reagent concentrations, mixing schemes, flow rates, and precipitation time, sizes of precipitated particles in the channel are power law distributed, with an exponent of 1.4. The data are described by an extended Yule process with the introduction of a ripening term. Since the Yule process is a general mechanism for power law generation, the extended Yule process proposed here provides a general model for systems where growth and ripening simultaneously present.