Effect of processing parameter changes on mechanical properties during injection molding: Amorphous versus semi‐crystalline materials
Authors:
- 28 March 2024
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (6) , 2868-2874
Abstract
Injection molding is the most common method to mass‐produce plastic parts. The high cost and long lead time of traditional injection molding steel molds make 3D‐printed plastic molds a potential substitute for limited production runs and prototype parts. However, results suggest that for some materials, utilizing plastic molds (compared to metal molds) could decrease the mechanical properties of parts, especially the ductility. In order to better understand the issues with utilizing plastic molds, in this work, we use a design of experiments to investigate how the processing parameter changes affect mechanical properties by comparing a semi‐crystalline polypropylene and an amorphous polystyrene material in a metal mold for better control of the controllable variables. Results show that ductility is the most sensitive property to processing conditions, especially for polypropylene. Our analysis shows that the controllable variable that affects ductility the most is mold temperature, then packing pressure, and injection time.Highlights: 3D‐printed plastic molds is a potential substitute for limited production runs. Effects of processing parameters are analyzed through the design of experiments. Ductility is the most sensitive property to processing conditions for the material studied. Mold temperature is the most significant variable for ductility.Keywords
This publication has 17 references indexed in Scilit:
- Difference in mechanical properties between plastic and metal molds for injection molding a talc reinforced rubber modified polypropylenePolymer Engineering & Science, 2022
- Additive Manufacturing Review: Early Past to Current PracticeJournal of Manufacturing Science and Engineering, 2020
- Review of additive manufacturing technologies and applications in the aerospace industry2019
- Comparative study of rapid and conventional tooling for plastics injection moldingRapid Prototyping Journal, 2017
- Degradation of Natural Rubber and Synthetic Elastomers2017
- Recent Advances in Analytical Chemistry by 3D PrintingAnalytical Chemistry, 2016
- The effects of moisture and temperature on the mechanical properties of additive manufacturing components: fused deposition modelingRapid Prototyping Journal, 2016
- Comparison of thermal, mechanical and thermomechanical properties of poly(lactic acid) injection-molded into epoxy-based Rapid Prototyped (PolyJet) and conventional steel moldJournal of Thermal Analysis and Calorimetry, 2015
- Hybrid moulds: effect of the moulding blocks on the morphology and dimensional propertiesRapid Prototyping Journal, 2009
- The structure of parts produced by stereolithography injection mould tools and the effect on part shrinkageInternational Journal of Machine Tools and Manufacture, 2004