Effect of Mo and B on Microstructure and Impact Toughness of Coarse Grain Heat-Affected Zone in Low-Carbon V-Ti-N Micro-Alloyed Steel
Open Access
Abstract
This study investigates the effects of molybdenum (Mo) and boron (B) on the microstructures and impact properties in the coarse grain heat-affected zone (CGHAZ) of a low-carbon V-Ti-N steel. The results demonstrate that, at a heat input of up to 75 kJ/cm, the addition of Mo alters the microstructure of the CGHAZ, transforming it from a polygonal ferrite (PF) + degraded pearlite (DP) composition to a granular bainite (GB) + a small amount of acicular ferrite (AF). This transformation increases the impact energy from 20 J to 35 J. Furthermore, with the Mo/B composite addition, the CGHAZ microstructure was refined due to the formation of a large number of acicular ferrites, and the mean equivalent diameter (MEDMTA≥15°) decreased from 7.9 μm to 4.2 μm. Consequently, the impact toughness of the CGHAZ increased from 35 J to 111 J. The correlation between the Mo/B elements, microstructure and impact toughness was investigated in detail. The findings of this study have the potential to generate novel ideas for the advancement of steel materials in the context of high heat input welding.Keywords
Funding Information
- National Natural Science Foundation of China (51671165, 51471142)
This publication has 34 references indexed in Scilit:
- The microstructure evolution and influence factors of acicular ferrite in low alloy steelsComputational Materials Science, 2022
- Fracture toughness of coarse-grain heat affected zone of quenched and tempered CrMo steels with internal hydrogen: Fracture micromechanismsEngineering Fracture Mechanics, 2021
- Atomic-scale study on segregation behavior at austenite grain boundaries in boron- and molybdenum-added steelsActa Materialia, 2017
- Effect of Nitrogen and Boron on the Development of Acicular Ferrite iN Reheated C-Mn-Ti Steel Weld MetalsWelding in the World, 2012
- Effects of transformation temperature on variant pairing of bainitic ferrite in low carbon steelActa Materialia, 2012
- Inclusions nucleating intragranular polygonal ferrite and acicular ferrite in low alloyed carbon manganese steel weldsMetals and Materials International, 2011
- New insights into intragranular ferrite in a low-carbon low-alloy steelActa Materialia, 2009
- In situ TEM study of the effect of M/A films at grain boundaries on crack propagation in an ultra-fine acicular ferrite pipeline steelActa Materialia, 2006
- Morphology and growth process of bainitic ferrite in steelsMetals and Materials, 1998
- Micromechanisms of failure in CMn weld metalsActa Metallurgica, 1987