Mingliang Qiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mingliang Qiao has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Qingfeng Wang
Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China
4 shared publications - Shibiao Wang
State Key Laboratory of Metastable Materials Science & Technology, Yanshan University, Qinhuangdao 066004, China
3 shared publications - Chengliang Han
State Key Laboratory of Metastable Materials Science & Technology, Yanshan University, Qinhuangdao 066004, China
2 shared publications - Huibing Fan
Nanjing Iron & Steel Co., Ltd., Nanjing 211500, China
2 shared publications - Qiang Yu
Department of Chemistry and Chemical Engineering, Cangzhou Normal University, Cangzhou 061001, China
2 shared publications - Riping Liu
State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China
2 shared publications
Latest Publications
- Open Access
Research on the Influence of Mo on the Corrosion Mechanism of 1%Ni Weathering Steel in Simulated Marine Atmospheric Environments
This study focuses on researching the influence of Mo on the corrosion mechanism of 1%Ni weathering steel (WS) in simulated marine atmospheric conditions. The Mo element is involved in the reaction, and after hydrolysis, MoO2 and MoO3 are produced. The deposition of MoO2 and MoO3 occurs in cracks and fissures, rendering the rust layer more uniform and homogeneous. It also furnishes nucleation sites for amorphous oxyhydroxide, which in turn promotes the interweaving of a nanosized oxyhydroxide network. As a result, the rust layer develops into a physical barrier that acquires a protective capacity. Only some of the Mo ions migrate to the vicinity of the Ni element for the hydrolysis reaction, which leads to the difficulty in improving the corrosion rate of the steel with a high Mo content. Hence, the content of Mo element can be controlled within 0.3–0.5% for the 1Ni WS.
Open AccessResearch on the Influence of Mo on the Corrosion Mechanism of 1%Ni Weathering Steel in Simulated Marine Atmospheric Environments
This study focuses on researching the influence of Mo on the corrosion mechanism of 1%Ni weathering steel (WS) in simulated marine atmospheric conditions. The Mo element is involved in the reaction, and after hydrolysis, MoO2 and MoO3 are produced. The deposition of MoO2 and MoO3 occurs in cracks and fissures, rendering the rust layer more uniform and homogeneous. It also furnishes nucleation sites for amorphous oxyhydroxide, which in turn promotes the interweaving of a nanosized oxyhydroxide network. As a result, the rust layer develops into a physical barrier that acquires a protective capacity. Only some of the Mo ions migrate to the vicinity of the Ni element for the hydrolysis reaction, which leads to the difficulty in improving the corrosion rate of the steel with a high Mo content. Hence, the content of Mo element can be controlled within 0.3–0.5% for the 1Ni WS.
- Open Access
Effect of Mo and B on Microstructure and Impact Toughness of Coarse Grain Heat-Affected Zone in Low-Carbon V-Ti-N Micro-Alloyed Steel
This study investigates the effects of molybdenum (Mo) and boron (B) on the microstructures and impact properties in the coarse grain heat-affected zone (CGHAZ) of a low-carbon V-Ti-N steel. The results demonstrate that, at a heat input of up to 75 kJ/cm, the addition of Mo alters the microstructure of the CGHAZ, transforming it from a polygonal ferrite (PF) + degraded pearlite (DP) composition to a granular bainite (GB) + a small amount of acicular ferrite (AF). This transformation increases the impact energy from 20 J to 35 J. Furthermore, with the Mo/B composite addition, the CGHAZ microstructure was refined due to the formation of a large number of acicular ferrites, and the mean equivalent diameter (MEDMTA≥15°) decreased from 7.9 μm to 4.2 μm. Consequently, the impact toughness of the CGHAZ increased from 35 J to 111 J. The correlation between the Mo/B elements, microstructure and impact toughness was investigated in detail. The findings of this study have the potential to generate novel ideas for the advancement of steel materials in the context of high heat input welding.
Open AccessEffect of Mo and B on Microstructure and Impact Toughness of Coarse Grain Heat-Affected Zone in Low-Carbon V-Ti-N Micro-Alloyed Steel
This study investigates the effects of molybdenum (Mo) and boron (B) on the microstructures and impact properties in the coarse grain heat-affected zone (CGHAZ) of a low-carbon V-Ti-N steel. The results demonstrate that, at a heat input of up to 75 kJ/cm, the addition of Mo alters the microstructure of the CGHAZ, transforming it from a polygonal ferrite (PF) + degraded pearlite (DP) composition to a granular bainite (GB) + a small amount of acicular ferrite (AF). This transformation increases the impact energy from 20 J to 35 J. Furthermore, with the Mo/B composite addition, the CGHAZ microstructure was refined due to the formation of a large number of acicular ferrites, and the mean equivalent diameter (MEDMTA≥15°) decreased from 7.9 μm to 4.2 μm. Consequently, the impact toughness of the CGHAZ increased from 35 J to 111 J. The correlation between the Mo/B elements, microstructure and impact toughness was investigated in detail. The findings of this study have the potential to generate novel ideas for the advancement of steel materials in the context of high heat input welding.
- Open Access
Insight into the Influence of Cu on the Corrosion Mechanism of 1%Ni Weathering Steel in a Simulated Containing NaCl Atmospheric Environment
It is difficult for traditional weathering steel (WS) to form a protective rust layer to withstand the chloride ions and high humidity. Hence, there is an urgent need to develop a new type of low-cost WS with excellent corrosion resistance in the containing NaCl environment. This study aims to determine the influence of Cu on the corrosion mechanism of 1%Ni WS in simulated containing NaCl atmospheric environments. By increasing the Cu content (0.15–0.55%), the corrosion resistance of WS is enhanced. The increasing Cu content promotes the formation of a stable and compact rust layer, significantly enriching the proportion of α-FeOOH to equip the rust layer with a physical barrier. The formation of CuO deposits in the holes and cracks make the rust layer more compact and uniform. The increased Cu content promotes the formation of CuFeO2 and increases the content of NiFe2O4. The formation of CuFeO2 and NiFe2O4 then equips the rust layer with a chemical barrier. Hence, the addition of Cu could enhance the resistance of 1%Ni WS to containing NaCl atmospheric environments.
Open AccessInsight into the Influence of Cu on the Corrosion Mechanism of 1%Ni Weathering Steel in a Simulated Containing NaCl Atmospheric Environment
It is difficult for traditional weathering steel (WS) to form a protective rust layer to withstand the chloride ions and high humidity. Hence, there is an urgent need to develop a new type of low-cost WS with excellent corrosion resistance in the containing NaCl environment. This study aims to determine the influence of Cu on the corrosion mechanism of 1%Ni WS in simulated containing NaCl atmospheric environments. By increasing the Cu content (0.15–0.55%), the corrosion resistance of WS is enhanced. The increasing Cu content promotes the formation of a stable and compact rust layer, significantly enriching the proportion of α-FeOOH to equip the rust layer with a physical barrier. The formation of CuO deposits in the holes and cracks make the rust layer more compact and uniform. The increased Cu content promotes the formation of CuFeO2 and increases the content of NiFe2O4. The formation of CuFeO2 and NiFe2O4 then equips the rust layer with a chemical barrier. Hence, the addition of Cu could enhance the resistance of 1%Ni WS to containing NaCl atmospheric environments.
- Open Access
Effect of Welding Heat Input on Microstructure and Impact Toughness in the Simulated CGHAZ of Low Carbon Mo-V-Ti-N-B Steel
Welding thermal cycles with heat inputs ranging from 25 to 75 kJ/cm were performed on a Gleeble 3500. The impact energy improved significantly (from 10 to 112 J), whereas the simulated coarse-grain heat-affected zone (CGHAZ) microstructure changed from lath bainite ferrite (LBF) and granular bainite ferrite (GBF) + martensite/austenite (M/A) to acicular ferrite (AF) + polygonal ferrite (PF) + M/A as the heat input increased. Simultaneously, the mean coarse precipitate sizes and the degree of V(C,N) enrichment on the precipitate surface increased, which provided favorable conditions for intragranular ferrite nucleation. The Ar3 of CGHAZ increased from 593 °C to 793 °C with increasing heat inputs; the longer high-temperature residence time inhibited the bainite transformation and promoted the ferrite transformation. As a result, acicular ferrite increased and bainite decreased in the CGHAZ. The CGHAZ microstructure was refined for the acicular ferrite segmentation of the prior austenite, and the microstructure mean equivalent diameter (MED) in the CGHAZ decreased from 7.6 µm to 4.2 µm; the densities of grain boundaries higher than 15° increased from 20.3% to 45.5% and significantly increased the impact toughness. The correlation of heat input, microstructure, and impact toughness was investigated in detail. These results may provide new ideas for the development of high welding heat input multiphase steels.
Open AccessEffect of Welding Heat Input on Microstructure and Impact Toughness in the Simulated CGHAZ of Low Carbon Mo-V-Ti-N-B Steel
Welding thermal cycles with heat inputs ranging from 25 to 75 kJ/cm were performed on a Gleeble 3500. The impact energy improved significantly (from 10 to 112 J), whereas the simulated coarse-grain heat-affected zone (CGHAZ) microstructure changed from lath bainite ferrite (LBF) and granular bainite ferrite (GBF) + martensite/austenite (M/A) to acicular ferrite (AF) + polygonal ferrite (PF) + M/A as the heat input increased. Simultaneously, the mean coarse precipitate sizes and the degree of V(C,N) enrichment on the precipitate surface increased, which provided favorable conditions for intragranular ferrite nucleation. The Ar3 of CGHAZ increased from 593 °C to 793 °C with increasing heat inputs; the longer high-temperature residence time inhibited the bainite transformation and promoted the ferrite transformation. As a result, acicular ferrite increased and bainite decreased in the CGHAZ. The CGHAZ microstructure was refined for the acicular ferrite segmentation of the prior austenite, and the microstructure mean equivalent diameter (MED) in the CGHAZ decreased from 7.6 µm to 4.2 µm; the densities of grain boundaries higher than 15° increased from 20.3% to 45.5% and significantly increased the impact toughness. The correlation of heat input, microstructure, and impact toughness was investigated in detail. These results may provide new ideas for the development of high welding heat input multiphase steels.