Experimental Study of Photopolymer Resin Composition for AlN Ceramic 3D Printing via Digital Light Processing
Open Access
Abstract
Aluminum nitride (AlN) ceramics exhibit exceptional properties that render them highly valuable for diverse industrial applications. However, conventional manufacturing techniques encounter significant challenges in fabricating complex AlN components with precise geometries. To address these limitations, digital light processing (DLP) has emerged as a promising additive manufacturing approach for AlN ceramics. This study presents a systematic investigation of the monomer composition in the photopolymer resin system through a comprehensive experimental evaluation. The results demonstrate that an optimized mixture of monomers ACMO (56.7 wt%), DEGDA (2.7 wt%), and TMPTA (40.6 wt%) yields photopolymer resin with superior comprehensive performance. Utilizing this optimized formulation, a 50 vol% solid loading AlN ceramic slurry was successfully prepared, and subsequently, dense AlN ceramic components were fabricated through DLP. This provides an important basis for optimizing the slurry preparation of AlN ceramic fabrication based on DLP 3D printing.Keywords
Funding Information
- Shandong Provincial Natural Science Foundation (ZR2023MB086)
This publication has 32 references indexed in Scilit:
- Enhanced curing behavior, mechanical and thermal properties of 3D printed aluminum nitride ceramics using a powder coating strategyAdditive Manufacturing, 2023
- Freeform injection molding of functional ceramics by hybrid additive manufacturingAdditive Manufacturing, 2022
- Current and emerging trends in polymeric 3D printed microfluidic devicesAdditive Manufacturing, 2022
- Additive manufacturing of complex-shaped and high-performance aluminum nitride-based components for thermal managementAdditive Manufacturing, 2022
- High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturingCeramics International, 2019
- The fabrication and mechanical properties of SiC/SiC composites prepared by SLS combined with PIPCeramics International, 2018
- Effects of Y2O3 and yttrium aluminates as sintering additives on the thermal conductivity of AlN ceramic substratesCeramics International, 2018
- Non-aqueous gelcasting of AlN ceramics using a low-toxicity monomer (DMAA) as gelling agentCeramics International, 2018
- Structural, thermal and mechanical properties of aluminum nitride ceramics with CeO2 as a sintering aidCeramics International, 2016
- Structure and thermal conductivity of powder injection molded AlN ceramicAdvanced Powder Technology, 2010