Synthesis of a Composite Material in Combustion Mode from a Mixture of Ti + 2B and Composite Ni–Al Particles with Different Ratios of Components
- 24 September 2025
- journal article
- research article
- Published by Pleiades Publishing Ltd in Inorganic Materials: Applied Research
- Vol. 16 (5) , 1505-1515
Abstract
—To obtain a composite with interpenetrating intermetallic/ceramic phases (of type IPC, interpenetrating phase composites) by the self-propagating high-temperature synthesis (SHS) method, the Ni–Al–Ti–2B powder system was used. It consisted of mechanically activated composite particles-granules (Ni + Al) and a mixture of finely dispersed boron and titanium powder. The quantitative ratio between the granules and the Ti + 2B mixture was varied. For all compositions, the synthesis was carried out in the combustion mode without heating. In the combustion wave front, the chemical reactions occurred in the composite granules and in the mixture around the granules, between titanium and boron. As a result of combustion a porous framework of titanium diboride was formed; a melt of nickel aluminides penetrated into the pores of the framework. The metal–ceramic combustion product is characterized by developed porosity and a composite structure with diboride and intermetallic phases located like interpenetrating frameworks. The TiB2–NiAl structure depends on the ratio of components in the mixture. The pores formed in place of the granules, repeating their shape.Keywords
This publication has 26 references indexed in Scilit:
- Review on development of metal/ceramic interpenetrating phase composites and critical analysis of their propertiesCeramics International, 2022
- Synthesis of nickel boride by thermal explosion in ball-milled powder mixturesJournal of Materials Science, 2018
- Combustion synthesis of NiAl matrix composite powder reinforced by TiB2 and TiN particulates from Ni–Al–Ti–BN reaction systemJournal of Alloys and Compounds, 2014
- Measurement of the impurity gas pressure during combustion of a “gasless” system in a long cylindrical shellCombustion, Explosion, and Shock Waves, 2010
- Thermal explosion of a mechanically activated 3Ni-Al mixtureCombustion, Explosion, and Shock Waves, 2010
- Comparison between the microstructural evolutions of two modes of SHS of NiAl: key to a common reaction mechanismActa Materialia, 2004
- Reaction steps in the combustion synthesis of NiAl/TiB2 compositesMetallurgical and Materials Transactions B, 2000
- Study of high-temperature reaction of Ti with B by the method of electrothermal explosionCombustion, Explosion, and Shock Waves, 1993
- Macrokinetics of reaction and thermal explosion in Ni and Al powder mixturesCombustion, Explosion, and Shock Waves, 1988
- Mechanism and macrokinetics of reactions accompanying the combustion of SHS systemsCombustion, Explosion, and Shock Waves, 1987