Experimental evaluation on the power characteristic of direct-photovoltaic charging for thermal storage equipment
Open Access
- 7 April 2024
- journal article
- Published by Universitas Muhammadiyah Magelang in Mechanical Engineering for Society and Industry
- Vol. 4 (1) , 115-122
Abstract
Thermal storage is an essential equipment for storing excessive heat, especially for water heating systems. The present work proposes a preliminary study to maximize the operation of thermal storage using photovoltaics as the primary source for charging the heat storage material. The assessment indicates the concept is feasible, where the output power from photovoltaics can be directly converted to heat using a heating element. The power ratio is considerably high (up to 38.6%), resulting in the maximum temperature of the heat absorber material (water) increasing to 43.2 °C. The final assessment using suitable phase transition material shows that steady phase behavior is essential to maximizing the temperature profile of the material. It is achieved using stabilized-hexadecanoic acid, which shows a transient phase transition at a temperature of 54.2 °C, reducing the possibility of heat loss with an average temperature rate of 0.54 °C/min in the discharge stage. This finding proves the proposed concept is applicable, while further improvement can be done to adjust the suitable power output from photovoltaic and storage tank arrangement for the actual system. Despite that, the result is expected to accelerate the utilization of photovoltaics as reliable solar renewable technology.Keywords
This publication has 34 references indexed in Scilit:
- The optional approach in recycling plastic waste for energy storage application: A detailed evaluation of stabilized–hexadecanoic acid/plasticCase Studies in Chemical and Environmental Engineering, 2024
- Multi-objective optimization of a diverter-driven photovoltaic water heater: A residential case study in MoroccoApplied Thermal Engineering, 2024
- Increasing the feasibility and storage property of cellulose-based biomass by forming shape-stabilized briquette with hydrophobic compoundCase Studies in Chemical and Environmental Engineering, 2023
- Investigating the performance of a water-based PVT system using encapsulated PCM balls: An experimental studyEnergy, 2023
- Effect of elliptical dimples on heat transfer performance in a shell and tube heat exchangerHeat and Mass Transfer, 2023
- Thermal hysteresis analysis of finned-heat-pipe-assisted latent heat thermal energy storage application for solar water heater systemCase Studies in Thermal Engineering, 2022
- Extended cycle life implications of fast charging for lithium-ion battery cathodeEnergy Storage Materials, 2021
- Partial cycle operation of latent heat storage with finned tubesApplied Energy, 2020
- A comprehensive parametric study on integrated thermal and mechanical performances of molten-salt-based thermocline tankApplied Thermal Engineering, 2020
- Impact and economic assessment on solar PV mirroring system – A feasibility reportEnergy Conversion and Management, 2020