Predictions of Crack Growth Rates, R-Ratio and Overload Effects Based on Smooth Specimen LCF Data and the Moving Plastic Stress Field Ahead of the Crack Tip
Preprint
- 21 April 2026
- preprint
- Published by MDPI AG in Preprints.org
Abstract
Previous work has attempted, often within the framework of strip yield-type models, to predict crack growth rates based on the accumulation of fatigue damage ahead of the crack tip as it moves through a structure. This study performs similar calculations using results from plastic 2D plane stress analyses run on a finite element (FE) model containing a sharp semi-circular notch representing an edge crack. Stress-distance profiles ahead of the crack tip (notch root) were extracted at the maximum and minimum points of a range of fatigue cycles with different loading amplitudes. These were used with data from smooth specimen Low Cycle Fatigue (LCF) tests to predict the build-up of fatigue damage at regularly spaced locations ahead of the crack tip and hence crack growth rates. The FE analyses were performed for a wide range of Kmax values at loading R-ratios of 0, -1 and 0.5, and the growth rate predictions were compared with test data. The method was then extended to predict overload behaviour. The material studied was the nickel-based superalloy fine grain (FG) RR1000 at 20°C.Keywords
All Related Versions
- Version 1, 2026-04-21, Preprints
- Published version: Materials, 19 (11), 2411.
This publication has 20 references indexed in Scilit:
- Geometry correction factor polynomials for corner crack test pieces accounting for constrained boundary conditionsFinite Elements in Analysis and Design, 2023
- Improved modeling of the effect of R-ratio on crack growth rateInternational Journal of Fatigue, 2007
- Analysis of vacuum fatigue crack growth results and its implicationsInternational Journal of Fatigue, 2005
- Singular and non-singular approaches for predicting fatigue crack growth behaviorInternational Journal of Fatigue, 2005
- A Strip-Yield algorithm for the analysis of closure evaluation near the crack tipEngineering Fracture Mechanics, 2005
- Correlation and prediction of fatigue crack growth for different R-ratios using Kmax and ΔK+ parametersEngineering Fracture Mechanics, 2004
- The effective fatigue threshold: significance of the loading cycle below the crack opening loadInternational Journal of Fatigue, 1994
- Effect of temperature on the threshold fatigue crack growth behaviour of spheroidal graphite cast ironInternational Journal of Pressure Vessels and Piping, 1993
- A strip model for fatigue crack growth predictions under general load conditionsEngineering Fracture Mechanics, 1991
- Elastic field equations for blunt cracks with reference to stress corrosion crackingInternational Journal of Fracture, 1967