Quantifying uncertainty in the measurement of arsenic in suspended particulate matter by Atomic Absorption Spectrometry with hydride generator
Open Access
- 5 April 2011
- journal article
- Published by Springer Nature in BMC Chemistry
- Vol. 5 (1) , 17
Abstract
Arsenic is the toxic element, which creates several problems in human being specially when inhaled through air. So the accurate and precise measurement of arsenic in suspended particulate matter (SPM) is of prime importance as it gives information about the level of toxicity in the environment, and preventive measures could be taken in the effective areas. Quality assurance is equally important in the measurement of arsenic in SPM samples before making any decision. The quality and reliability of the data of such volatile elements depends upon the measurement of uncertainty of each step involved from sampling to analysis. The analytical results quantifying uncertainty gives a measure of the confidence level of the concerned laboratory. So the main objective of this study was to determine arsenic content in SPM samples with uncertainty budget and to find out various potential sources of uncertainty, which affects the results. Keeping these facts, we have selected seven diverse sites of Delhi (National Capital of India) for quantification of arsenic content in SPM samples with uncertainty budget following sampling by HVS to analysis by Atomic Absorption Spectrometer-Hydride Generator (AAS-HG). In the measurement of arsenic in SPM samples so many steps are involved from sampling to final result and we have considered various potential sources of uncertainties. The calculation of uncertainty is based on ISO/IEC17025: 2005 document and EURACHEM guideline. It has been found that the final results mostly depend on the uncertainty in measurement mainly due to repeatability, final volume prepared for analysis, weighing balance and sampling by HVS. After the analysis of data of seven diverse sites of Delhi, it has been concluded that during the period from 31st Jan. 2008 to 7th Feb. 2008 the arsenic concentration varies from 1.44 ± 0.25 to 5.58 ± 0.55 ng/m3 with 95% confidence level (k = 2).Keywords
This publication has 10 references indexed in Scilit:
- Determination of arsenic and mercury metals in suspended particulate matter by flame/flameless atomic absorption spectrometerAtmospheric Pollution Research, 2010
- Evaluation and Expression of Uncertainty in the Determination of Alumina in Deodorants Using Complexometric MethodJournal of Testing and Evaluation, 2009
- Correlation between the arsenic concentrations in the air and the SMR of lung cancerEnvironmental Health and Preventive Medicine, 2008
- Underestimation of total arsenic concentration in groundwater samples determined by hydride generation quartz furnace atomic absorption spectrometry due to sample characteristicsAccreditation and Quality Assurance, 2007
- Inter-element interferences in the determination of arsenic and antimony by hydride generation atomic absorption spectrometry with a quartz tube atomizerAnalytica Chimica Acta, 2004
- Uncertainties of mercury determinations in biological materials using an atomic absorption spectrometer - AMA 254Accreditation and Quality Assurance, 2000
- Study of some interfering processes in the arsenic, antimony and selenium determination by hydride generation atomic absorption spectrometryAnalytical and Bioanalytical Chemistry, 1993
- Cross-interferences of hydride-forming elements in hydride-generation atomic absorption spectrometryAnalytica Chimica Acta, 1992
- Sediments: Chemistry and Toxicity of In-Place Pollutants. R. Baudo , J. Giesy , H. MuntauJournal of the North American Benthological Society, 1991
- Heavy Metals in Natural Waters1984