Loss Calculation, Thermal Analysis, and Measurement of Magnetically Suspended PM Machine
- 13 November 2017
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 65 (6) , 4514-4523
Abstract
Temperature rise caused by losses is a key issue for a high-speed machine. This paper deals with loss calculation and thermal analysis of a high-speed magnetically suspended PM machine (MSPMM) with an actual power of 33 kW and rotation speed of 55 332 r/min. The temperature distribution based on the finite element method is obtained by accounting for various losses, which consist of air friction losses, copper losses, and iron losses of a radial magnetic bearing, a combined radial/axial magnetic bearing, and high-speed permanent magnet machine (PMM). A back-to-back test setup with two MSPMM is fabricated for verifying the calculation results. The predicted maximum temperature of rotor is located in the center of the cylindrical permanent magnet, and the value is 143 °C. Except for the rotor, the estimated maximum temperature of the stator parts is located in tooth tips of the motor stator core, the value is 92 °C, and the error between the predicted temperature and the measured one is 9.3%. Total measured losses are 1644.4 W, the estimated total losses are 1536.7 W, the error is 6.5%, and the efficiency of the machine under test is 94.6%. The loss calculation and thermal analysis results are verified by the measured ones.Keywords
Funding Information
- National Natural Science Foundation of China (61573032)
- National Major Project for the Development and Application of Scientific Instrument Equipment of China (2012YQ040235)
- Fundamental Research Funds for the Central Universities (YWF-16-BJ-J-24)
This publication has 21 references indexed in Scilit:
- Loss Calculation and Thermal Analysis of Rotors supported by Active Magnetic Bearings for High-speed Permanent Magnet Electrical MachinesIEEE Transactions on Industrial Electronics, 2015
- Design, Modeling, Fabrication, Back-to-Back Test of a Magnetic Bearing System for High-Speed BLDCM ApplicationJournal of Engineering for Gas Turbines and Power, 2015
- Electromagnetic Design and Loss Calculations of a 1.12-MW High-Speed Permanent-Magnet Motor for Compressor ApplicationsIEEE Transactions on Energy Conversion, 2015
- Loss calculation and thermal analysis of surface-mounted PM motor and interior PM motor2015
- Vibration Suppression Control for AMB-Supported Motor Driveline System Using Synchronous Rotating Frame TransformationIEEE Transactions on Industrial Electronics, 2015
- Losses estimation and modelling in active magnetic bearings2014
- Core Loss Modeling for Permanent-Magnet Motor Based on Flux Variation Locus and Finite-Element MethodIEEE Transactions on Magnetics, 2012
- Design and control for hybrid magnetic thrust bearing for turbo refrigerant compressor2011
- Combined Radial-Axial Magnetic Bearing for a 1 kW, 500,000 rpm Permanent Magnet MachineAPEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition, 2007
- A novel compact PMSM with magnetic bearing for artificial heart applicationIEEE Transactions on Industry Applications, 2000