Temperature dependence on dry etching of Al2O3 thin films in BCl3/Cl2/Ar plasma
- 29 June 2009
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 27 (4) , 821-825
Abstract
During the etching process, the wafer surface temperature is an important parameter which influences the reaction probabilities of incident species, the vapor pressure of etch products, and the redeposition of reaction products on feature surfaces. In this study, the authors investigated that the effect of substrate temperature on the etch rate of Al2O3 thin film and selectivity of Al2O3 thin film over hard mask material (such as SiO2) thin film in inductively coupled plasma as functions of Cl2 addition in BCl3/Ar plasma, rf power, and dc-bias voltage based on the substrate temperature in range of 10–80 °C. The elements existed on the surface were analyzed by energy dispersive x-ray and x-ray photoelectron spectroscopy.Keywords
This publication has 10 references indexed in Scilit:
- Etching characteristics of Al2O3 thin films in inductively coupled BCl3/Ar plasmaVacuum, 2008
- Influence of the SiO2 layer thickness on the degradation of HfO2/SiO2 stacks subjected to static and dynamic stress conditionsMicroelectronics Reliability, 2007
- Inductively coupled plasma reactive ion etching of ZnO using C2F6and NF3-based gas mixturesSemiconductor Science and Technology, 2006
- The etching properties of Al2O3 thin films in N2/Cl2/BCl3 and Ar/Cl2/BCl3 gas chemistryMaterials Science and Engineering: B, 2005
- Etching properties of Al2O3 films in inductively coupled plasmaThin Solid Films, 2004
- Etching Characteristics of Manganese-Doped Zinc Sulfide Film Using Cl2/CF4 Inductively Coupled PlasmaJapanese Journal of Applied Physics, 2004
- Inductively coupled plasma reactive ion etching of SiC single crystals using NF3-based gas mixturesJournal of Electronic Materials, 2003
- Voltage-dependent dielectric breakdown and voltage-controlled negative resistance in anodized Al–Al2O3–Au diodesJournal of Applied Physics, 2000
- Fabrication of magnetic recording heads and dry etching of head materialsIBM Journal of Research and Development, 1999
- Industrial Plasma Engineering1995