Study on Machine Tool Positioning Uncertainty Due to Volumetric Verification
Open Access
Abstract
Volumetric verification is based on the machine tool (MT) kinematic model, along with its geometric errors. Although users often ignore the uncertainty of verification, the use of the MT as a traceable measurement system in the manufacturing process has increased the need for professionals to be aware of it. This paper presents an improvement in the MT kinematic model, introducing in it the influence of verification uncertainty sources. These sources have been classified into four groups: the MT, the measurement system itself, the measurement strategy, and the optimization strategy. As the developed model exhibits non-linear behavior, the Monte Carlo method was used to determine the influence of the measurement system on verification uncertainty using synthetic tests. In this manner, an improved estimation of the MT uncertainty can be obtained. Therefore, if the MT is used as a traceable measurement system, its accuracy should not be higher than the laser tracker (LT) verification influence. It hence shows the importance of LT influence.Keywords
This publication has 20 references indexed in Scilit:
- Influence of laser tracker noise on the uncertainty of machine tool volumetric verification using the Monte Carlo methodMeasurement, 2019
- Five axis machine tool volumetric error prediction through an indirect estimation of intra- and inter-axis error parameters by probing facets on a scale enriched uncalibrated indigenous artefactPrecision Engineering, 2015
- Volumetric calibration in multi-space in large-volume machine based on measurement uncertainty analysisThe International Journal of Advanced Manufacturing Technology, 2014
- Protocol for machine tool volumetric verification using commercial laser trackerThe International Journal of Advanced Manufacturing Technology, 2014
- A general approach for error modeling of machine toolsInternational Journal of Machine Tools and Manufacture, 2014
- A methodology for systematic geometric error compensation in five-axis machine toolsThe International Journal of Advanced Manufacturing Technology, 2010
- Machine tool calibration: Geometric test uncertainty depends on machine tool performancePrecision Engineering, 2009
- Measurement uncertainty and optimized conformance assessmentMeasurement, 2006
- An analysis of the volumetric error uncertainty of a three-axis machine tool by beta distributionInternational Journal of Machine Tools and Manufacture, 2000
- Generation of Parametric Kinematic Error-Correction Functions from Volumetric Error MeasurementsCIRP Annals, 1985