Temperature-Dependent Charge Dynamics of Double Layer Interface in 500 kV HVDC XLPE Cable Factory Joint with Different Interfacial Roughness
- 8 March 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 29 (10709878) , 1
Abstract
This article investigates the effect of different temperatures (30 °C, 50 °C, and 70 °C) on the interfacial and electrical insulation properties of 500 kV high voltage direct current (HVDC) cross-linked polyethylene (XLPE) cable factory joint having different roughness levels. The test samples with different interfacial roughness (#80, #400, #1000, #2000, and #0000) were prepared by surface polishing followed by an XLPE injection vulcanization process. At the interface, visible microporous defects were observed. The volume of pits on the sample surface and microporous defects at the interface can be reduced by a smooth interface. Moreover, the smoother interface facilitates space charge accumulation. The dc breakdown strength was nearly the same regardless roughness level at high temperatures. The results show that smooth interfaces help improving insulation properties of cable factory joints at low temperatures. However, the effect of interfacial roughness on insulating properties is weakened at elevated temperatures.Keywords
Funding Information
- Key Project of Ningbo City (2018B10019)
- National Natural Science Foundation of China (51977187)
- Scientific Research Fund of Zhejiang Provincial Education Department (Y202045641)
This publication has 21 references indexed in Scilit:
- The Role of Interfaces in Polyethylene/Metal‐Oxide Nanocomposites for Ultrahigh‐Voltage Insulating MaterialsAdvanced Materials, 2017
- Interface charges between insulating materialsIEEE Transactions on Dielectrics and Electrical Insulation, 2017
- Improved DC performance of crosslinked polyethylene insulation depending on a higher purityIEEE Transactions on Dielectrics and Electrical Insulation, 2017
- Suppressing interface charge between LDPE and EPDM for HVDC cable accessory insulationIEEE Transactions on Dielectrics and Electrical Insulation, 2017
- Investigation of charge trapping and detrapping dynamics in LDPE, HDPE and XLPEIEEE Transactions on Dielectrics and Electrical Insulation, 2016
- Application of contact analysis on evaluation of breakdown strength and PD inception field strength of solid-solid interfacesIEEE Transactions on Dielectrics and Electrical Insulation, 2012
- Structural effects on thermal properties and morphology in XLPEEuropean Polymer Journal, 2010
- Effect of traps on surface flashover of XLPE in vacuumIEEE Transactions on Dielectrics and Electrical Insulation, 2010
- Nanoscopic aspects of electronic aging in dielectricsIEEE Transactions on Dielectrics and Electrical Insulation, 1997
- New theory of electrical discharge and breakdown in low-mobility condensed insulatorsJournal of Applied Physics, 1984