Yiwen Shi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yiwen Shi has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Ashish Paramane
Department of Electrical Engineering, National Institute of Technology Silchar, Silchar, India
6 shared publications - Fan-Bo Meng
Shandong University
6 shared publications - Muhammad Awais
Ningbo Orient Wires and Cables Company Ltd
6 shared publications - Xiangrong Chen
College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China
5 shared publications - Zelin Hong
College of Electrical Engineering, Zhejiang University, Hangzhou, China
4 shared publications Hanshan Zhu
College of Electrical Engineering, Zhejiang University, Hangzhou, China
3 shared publications
Latest Publications
- 8 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 30 (1) , 255-262
Optimal Content Selection of Voltage Stabilizers Using TOPSIS Method to Achieve Enhanced Material Properties for HVDC Cable Insulation Applications
Three different contents (1, 3, and 5 wt%) of 4-n-propylbenzoic acid as the voltage stabilizer are added to cross-linked polyethylene (XLPE), whereas electrical, mechanical, and thermal properties of XLPE/stabilizer blends are measured. The obtained results show that the voltage stabilizer addition facilitates a reduction in accumulated space charges and conduction current and improves the life exponent and thermal conductivity of the XLPE but negatively affects the degree of cross-linking. The optimal content of the voltage stabilizer to attain the balanced overall properties is selected by the technique for order of preference by similarity to ideal solution (TOPSIS) method. The electric field distortion rate, conduction current, and temperature sensitivity of electrical conductivity under 40 kV/mm, dc breakdown strength, thermal conductivity, gel content, elongation at break, tensile strength, crystallinity, and temperature at a maximum decomposition rate of the samples are selected as evaluation indices for the TOPSIS method, which yields the 1 wt% of 4-n-propylbenzoic acid as the optimal content. The calculated life exponent is maximum for the XLPE-1, suggesting that the high voltage direct current (HVDC) cable having XLPE insulation with the optimal content of the voltage stabilizer will have a longer service life.
- 8 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 30 (1) , 255-262
Optimal Content Selection of Voltage Stabilizers Using TOPSIS Method to Achieve Enhanced Material Properties for HVDC Cable Insulation Applications
Three different contents (1, 3, and 5 wt%) of 4-n-propylbenzoic acid as the voltage stabilizer are added to cross-linked polyethylene (XLPE), whereas electrical, mechanical, and thermal properties of XLPE/stabilizer blends are measured. The obtained results show that the voltage stabilizer addition facilitates a reduction in accumulated space charges and conduction current and improves the life exponent and thermal conductivity of the XLPE but negatively affects the degree of cross-linking. The optimal content of the voltage stabilizer to attain the balanced overall properties is selected by the technique for order of preference by similarity to ideal solution (TOPSIS) method. The electric field distortion rate, conduction current, and temperature sensitivity of electrical conductivity under 40 kV/mm, dc breakdown strength, thermal conductivity, gel content, elongation at break, tensile strength, crystallinity, and temperature at a maximum decomposition rate of the samples are selected as evaluation indices for the TOPSIS method, which yields the 1 wt% of 4-n-propylbenzoic acid as the optimal content. The calculated life exponent is maximum for the XLPE-1, suggesting that the high voltage direct current (HVDC) cable having XLPE insulation with the optimal content of the voltage stabilizer will have a longer service life.
- 1 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 30 (1) , 271-278
Insulation Properties and Interfacial Quantum Chemical Analysis of Cross-Linked Polyethylene Under Different Degassing Time for HVDC Cable Factory Joint Applications
Degassing treatment is critical to remove cross-linking by-products in cross-linked polyethylene (XLPE) cable factory joints and prevent early insulation deterioration. In this article, 500-kV high-voltage direct-current (HVDC) cable factory joint samples were prepared, and the physicochemical and temperature-dependent electrical properties of the samples under different degassing times were investigated. The results show that prolonged degassing treatment increases the crystallinity and reduces the tensile properties of the XLPE samples. The samples without degassing have visible micropores near the interface, and these micropores can be eliminated after a longer degassing time. In addition, degassing treatment can reduce the current density, increase the threshold field strength, and enhance the breakdown strength of the samples. A significant negative charge accumulation appears at the interface of the sample without degassing, which dramatically distorts the electric field. Long-term degassing treatment can improve this phenomenon, and the accumulated charge at the interface at elevated temperatures is significantly reduced. Furthermore, a model of the molecular chain microstructure at the interface before and after degassing is proposed. The molecular chain’s energy band structure and electron cloud distribution at the interface are analyzed based on quantum chemical calculation. It is found that cable makers can improve the insulation properties of cable factory joints by appropriately extending the degassing time to avoid interface deterioration.
- 1 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 30 (1) , 271-278
Insulation Properties and Interfacial Quantum Chemical Analysis of Cross-Linked Polyethylene Under Different Degassing Time for HVDC Cable Factory Joint Applications
Degassing treatment is critical to remove cross-linking by-products in cross-linked polyethylene (XLPE) cable factory joints and prevent early insulation deterioration. In this article, 500-kV high-voltage direct-current (HVDC) cable factory joint samples were prepared, and the physicochemical and temperature-dependent electrical properties of the samples under different degassing times were investigated. The results show that prolonged degassing treatment increases the crystallinity and reduces the tensile properties of the XLPE samples. The samples without degassing have visible micropores near the interface, and these micropores can be eliminated after a longer degassing time. In addition, degassing treatment can reduce the current density, increase the threshold field strength, and enhance the breakdown strength of the samples. A significant negative charge accumulation appears at the interface of the sample without degassing, which dramatically distorts the electric field. Long-term degassing treatment can improve this phenomenon, and the accumulated charge at the interface at elevated temperatures is significantly reduced. Furthermore, a model of the molecular chain microstructure at the interface before and after degassing is proposed. The molecular chain’s energy band structure and electron cloud distribution at the interface are analyzed based on quantum chemical calculation. It is found that cable makers can improve the insulation properties of cable factory joints by appropriately extending the degassing time to avoid interface deterioration.
- 28 October 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (1)
Influence of dielectric barrier effect and thermally‐conductive network on thermal and electrical properties of epoxy under different frequencies and temperatures
Epoxy resin (EPR) insulations play a vital role in the insulation of modern power electronic equipment owing to their excellent dielectric properties. However, due to the high‐power density and miniaturization of power equipment which causes high heat fluxes under high voltage and high‐frequency stresses, EPR with good thermal and insulation properties is urgently needed. In this study, the polydopamine functionalized micro‐BN and core‐shell nano TiO2–SiO2 particles are dispersed in EPR to simultaneously improve thermal and dielectric insulation properties. It is revealed that the addition of micro‐nano particles significantly improves the thermal and dielectric performance. Particularly, the high thermal conductivity of micro‐BN and the dielectric barrier effect due to the core‐shell structure of nano TiO2–SiO2 are the main reasons for improved thermal and dielectric insulation performance, respectively. The EPR composite containing 3 wt% of micro‐BN and 1 wt% of nano TiO2–SiO2 exhibits the optimal performance with 0.49 W/mK thermal conductivity and the highest dielectric strength among all the samples, that is, 60.61 kV/mm even at 10 kHz and 90°C. This study found that the crucial factors are the surface encapsulation, weight percent, and homogeneous dispersion of particles in EPR, the dielectric barrier effect, thermal conductivity, and the mismatch between the dielectric constant of EPR and particles. This study proposes the optimal weight percent of suitable micro‐nano particles for EPR to produce suitable composites for high‐frequency and high‐temperature applications.
- 28 October 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (1)
Influence of dielectric barrier effect and thermally‐conductive network on thermal and electrical properties of epoxy under different frequencies and temperatures
Epoxy resin (EPR) insulations play a vital role in the insulation of modern power electronic equipment owing to their excellent dielectric properties. However, due to the high‐power density and miniaturization of power equipment which causes high heat fluxes under high voltage and high‐frequency stresses, EPR with good thermal and insulation properties is urgently needed. In this study, the polydopamine functionalized micro‐BN and core‐shell nano TiO2–SiO2 particles are dispersed in EPR to simultaneously improve thermal and dielectric insulation properties. It is revealed that the addition of micro‐nano particles significantly improves the thermal and dielectric performance. Particularly, the high thermal conductivity of micro‐BN and the dielectric barrier effect due to the core‐shell structure of nano TiO2–SiO2 are the main reasons for improved thermal and dielectric insulation performance, respectively. The EPR composite containing 3 wt% of micro‐BN and 1 wt% of nano TiO2–SiO2 exhibits the optimal performance with 0.49 W/mK thermal conductivity and the highest dielectric strength among all the samples, that is, 60.61 kV/mm even at 10 kHz and 90°C. This study found that the crucial factors are the surface encapsulation, weight percent, and homogeneous dispersion of particles in EPR, the dielectric barrier effect, thermal conductivity, and the mismatch between the dielectric constant of EPR and particles. This study proposes the optimal weight percent of suitable micro‐nano particles for EPR to produce suitable composites for high‐frequency and high‐temperature applications.
- 10 June 2022
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 5 (6) , 7681-7691
Spraying Core–Shell ZnO To Achieve High Insulation Performance for HVDC Cable Factory Joints
- 10 June 2022
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 5 (6) , 7681-7691
Spraying Core–Shell ZnO To Achieve High Insulation Performance for HVDC Cable Factory Joints
- 22 March 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (24)
Influence of organic additives with electron‐withdrawing and electron‐donating groups on insulation properties of cross‐linked polyethylene at high temperatures for HVDC cable applications
This paper investigated the influence of three aromatic voltage stabilizers (4‐n‐propylbenzoic acid, 2‐methoxyphenylboronic acid, and 3‐aminobenzoylmethylamide) on insulating properties of cross‐linked polyethylene (XLPE) at high temperatures for high voltage direct current (HVDC) applications. The XLPE blends containing 1 wt% voltage stabilizers were prepared through a solution‐blending method. The addition of voltage stabilizers suppressed the space charge inside the XLPE at high temperatures. The DC conductivity of XLPE and its blends increased with temperature. The DC conductivity of the XLPE blended with the 4‐n‐propylbenzoic acid was lowest at the different temperatures and electric fields. The DC breakdown strength of the tested materials continually decreased as the temperature increased. Notably, the DC breakdown strength of XLPE with the addition of 4‐n‐propylbenzoic acid and 3‐aminobenzoylmethylamide was higher than the reference XLPE at high temperatures. Moreover, the thermal stability of the XLPE remained unaffected after the voltage stabilizer's addition, whereas the thermal conductivity was improved. Quantum chemical calculations showed that the addition of voltage stabilizers with lower LUMO could effectively buffer the high‐energy electrons and improve the DC breakdown strength of the XLPE. A buffering mechanism of high‐energy electrons demonstrated the effect of the voltage stabilizers on the DC breakdown strength in the XLPE.
- 22 March 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (24)
Influence of organic additives with electron‐withdrawing and electron‐donating groups on insulation properties of cross‐linked polyethylene at high temperatures for HVDC cable applications
This paper investigated the influence of three aromatic voltage stabilizers (4‐n‐propylbenzoic acid, 2‐methoxyphenylboronic acid, and 3‐aminobenzoylmethylamide) on insulating properties of cross‐linked polyethylene (XLPE) at high temperatures for high voltage direct current (HVDC) applications. The XLPE blends containing 1 wt% voltage stabilizers were prepared through a solution‐blending method. The addition of voltage stabilizers suppressed the space charge inside the XLPE at high temperatures. The DC conductivity of XLPE and its blends increased with temperature. The DC conductivity of the XLPE blended with the 4‐n‐propylbenzoic acid was lowest at the different temperatures and electric fields. The DC breakdown strength of the tested materials continually decreased as the temperature increased. Notably, the DC breakdown strength of XLPE with the addition of 4‐n‐propylbenzoic acid and 3‐aminobenzoylmethylamide was higher than the reference XLPE at high temperatures. Moreover, the thermal stability of the XLPE remained unaffected after the voltage stabilizer's addition, whereas the thermal conductivity was improved. Quantum chemical calculations showed that the addition of voltage stabilizers with lower LUMO could effectively buffer the high‐energy electrons and improve the DC breakdown strength of the XLPE. A buffering mechanism of high‐energy electrons demonstrated the effect of the voltage stabilizers on the DC breakdown strength in the XLPE.
- 8 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 29 (10709878) , 1
Temperature-Dependent Charge Dynamics of Double Layer Interface in 500 kV HVDC XLPE Cable Factory Joint with Different Interfacial Roughness
This article investigates the effect of different temperatures (30 °C, 50 °C, and 70 °C) on the interfacial and electrical insulation properties of 500 kV high voltage direct current (HVDC) cross-linked polyethylene (XLPE) cable factory joint having different roughness levels. The test samples with different interfacial roughness (#80, #400, #1000, #2000, and #0000) were prepared by surface polishing followed by an XLPE injection vulcanization process. At the interface, visible microporous defects were observed. The volume of pits on the sample surface and microporous defects at the interface can be reduced by a smooth interface. Moreover, the smoother interface facilitates space charge accumulation. The dc breakdown strength was nearly the same regardless roughness level at high temperatures. The results show that smooth interfaces help improving insulation properties of cable factory joints at low temperatures. However, the effect of interfacial roughness on insulating properties is weakened at elevated temperatures.
- 8 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 29 (10709878) , 1
Temperature-Dependent Charge Dynamics of Double Layer Interface in 500 kV HVDC XLPE Cable Factory Joint with Different Interfacial Roughness
This article investigates the effect of different temperatures (30 °C, 50 °C, and 70 °C) on the interfacial and electrical insulation properties of 500 kV high voltage direct current (HVDC) cross-linked polyethylene (XLPE) cable factory joint having different roughness levels. The test samples with different interfacial roughness (#80, #400, #1000, #2000, and #0000) were prepared by surface polishing followed by an XLPE injection vulcanization process. At the interface, visible microporous defects were observed. The volume of pits on the sample surface and microporous defects at the interface can be reduced by a smooth interface. Moreover, the smoother interface facilitates space charge accumulation. The dc breakdown strength was nearly the same regardless roughness level at high temperatures. The results show that smooth interfaces help improving insulation properties of cable factory joints at low temperatures. However, the effect of interfacial roughness on insulating properties is weakened at elevated temperatures.
- 2 February 2022
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 4 (2) , 1422-1430
Enhancement of Insulation Properties of Cross-Linked Polyethylene Utilizing Aromatic Voltage Stabilizers with Electron-Withdrawing and Electron-Donating Groups
- 2 February 2022
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 4 (2) , 1422-1430
Enhancement of Insulation Properties of Cross-Linked Polyethylene Utilizing Aromatic Voltage Stabilizers with Electron-Withdrawing and Electron-Donating Groups