Stress Corrosion Cracking of Sensitized Type 304 Stainless Steel in High Temperature Chloride Solutions
Authors:
- L. F. LinLLL. F. Lin
- G. GragnolinoGGG. Gragnolino
- Z. Szklarska-SmialowskaZSZ. Szklarska-Smialowska
- 1 November 1981
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 37 (11) , 616-627
Abstract
The SCC susceptibility of sensitized Type 304 stainless steel was studied using slow strain rate tests in 0.01 M NaCl as a function of applied potential at temperatures ranging from 100 to 250 C. Potential-temperature domains in which purely IGSCC, simultaneous IGSCC and TGSCC, and IGSCC accompanied by pitting corrosion have been determined. A critical potential for IGSCC and its dependence upon temperature was measured. This critical potential is equal to the pitting potential at temperatures lower than 150 C, but at higher temperatures, it lies within the passive range of the alloy. Above 150 C, the potential for breakdown of passivity becomes independent of temperature and corresponds to the potential at which TGSCC occurs on sensitized and on quench-annealed material. Interrupted slow strain rate tests were conducted to determine the time at which intergranular cracks start to propagate. On the basis of these data, average intergranular crack propagation rates were calculated. An apparent activation energy of 29 ± 12 KJ/mol was determined in the temperature range 200 to 275 C. It was also found that propagating intergranular cracks can be arrested by changing the potential to a value which is lower than the critical potential.Keywords
This publication has 13 references indexed in Scilit:
- Stress Corrosion Cracking of Sensitized Type 304 Stainless Steel in Oxygenated Pure Water at Elevated Temperatures (Review)Corrosion, 1980
- Effect of Loading Rate on Environmentally Controlled Cracking of Sensitized 304 Stainless Steel in High Purity WaterCorrosion, 1980
- The Prediction of Stress Corrosion Cracking of Sensitized 304 Stainless Steel in 0.01M Na2SO4 at 97 CCorrosion, 1980
- The Effect of Chloride Ion Concentration and Applied Potential on the SCC Behavior of Type 304 Stainless Steel in Deaerated High Temperature WaterCorrosion, 1980
- The stress corrosion cracking of sensitized austenitic stainless steels and nickel-base alloysCorrosion Science, 1980
- The Effect of Oxygen Temperature Combinations on the Stress Corrosion Susceptibility of Sensitized Type 304 Stainless Steel in High Purity WaterCorrosion, 1979
- High Temperature Electrochemical Studies of the Stress Corrosion of Type 304 Stainless SteelCorrosion, 1979
- Stress Corrosion Cracking of C-Mn Steel in Phosphate SolutionsCorrosion, 1978
- A Silver-Silver Chloride Reference Electrode for the High Temperature and High Pressure ElectrochemistryCorrosion, 1977
- Direct evidence of chromium depletion near the grain boundaries in sensitized stainless steelsScripta Metallurgica, 1977