The influence of Circuit Parameters on Molten Bridge Surface Degradation in a Au/MWCNT MEMS Switch Contact
Authors:
- 1 October 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 359-365
Abstract
The influence of circuit parameters on an Ohmic (metal-metal contact) MEMS (microelectromechanical system) switch contact pair are investigated under hot-switching (carrying current) circuit conditions below the arcing-threshold. A novel MEMS relay testing platform is used to investigate microscale contact surface change between individual switching events. The contact materials are a composite contact material of vertically-aligned carbon-nanotubes with a metallic (Au) layer, paired with an Au-coated ball contact. The evolution of the contact surface is evaluated along with the energy associated with the molten-metal bridge (MMB) phenomena. Circuit voltage is varied between 4 and 8 V DC and current between 20 and 50 mA to determine their influence on surface degradation. Two modes of voltage transient are observed. The first has been linked to the formation of a MMB and the second to a delamination event (DE) where the contacts separate with no MMB apparent. Results are presented on the relative likelihood of the DE or the MMB events occurring. After 100k cycles at switching conditions of 4V, 20 mA the contact surface demonstrates negligible wear. Increasing the current (4 V, 50 mA) or the voltage (8 V, 20 mA) both increase the average energy associated with opening and the contact wear. The increase in MMB energy and wear with supply voltage is unexpected and is discussed.Keywords
This publication has 13 references indexed in Scilit:
- Surface characterization of a Au/CNT composite for a MEMS switching application2016
- A review of micro-contact physics, materials, and failure mechanisms in direct-contact RF MEMS switchesJournal of Micromechanics and Microengineering, 2016
- Improving Gold/Gold Microcontact Performance and Reliability Under Low-Frequency AC Through Circuit LoadingIEEE Transactions on Components, Packaging and Manufacturing Technology, 2016
- Evolution of Voltage Transients During the Switching of a MEMS Relay With Au/MWCNT ContactsIEEE Transactions on Components, Packaging and Manufacturing Technology, 2015
- Investigating the benefits of a compliant gold coated multi-walled carbon nanotube contact surface in micro-electro mechanical systems switchingApplied Physics Letters, 2015
- The Wear of Hot Switching Au/Cr-Au/MWCNT Contact Pairs for MEMS ContactsIEICE Transactions on Electronics, 2015
- The Wear Processes of Gold Coated Multi-Walled Carbon Nanotube Surfaces Used as Electrical Contacts for Micro-Electro-Mechanical SwitchingNanoscience and Nanotechnology Letters, 2010
- Improving the contact resistance at low force using gold coated carbon nanotube surfacesThe European Physical Journal Applied Physics, 2010
- RF MEMS switches and switch circuitsIEEE Microwave Magazine, 2001
- The electrical contact: the properties and rupture of the microscopic molten metal bridgeJournal of Physics D: Applied Physics, 1969