Improvement of Polypropylene/Silicone Rubber Interface by Insulating Oils With Pressure Optimization
- 15 January 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 32 (3) , 1289-1296
Abstract
Cable accessory insulation system is inevitably affected by its interface states causing insulation failure. Insulating oils are often applied in the interface with a certain pressure to improve its performance, but the mismatching and degradation of polymer in insulating oils seriously affects the interface stability. This study focuses on polypropylene (PP) insulation and aims to improve its typical accessory interface with silicone rubber (SIR) by insulating oils with pressure. Results show that hydrocarbon oil has the biggest negative impact on PP with the most mass increment, more surface deposits and significant deteriorating in both mechanical and electrical properties. By contrast, appropriate absorption of Si-containing oil helps modify surface and fill initial defects of PP, promoting insulating performance. Furthermore, it is found that interface pressure is conductive to fabricate a stable PP/insulating oil/SIR structure with excellent insulating performance. However, excessive pressure causes a negative impact due to interface deformation of materials. Based on the analysis of interface microstructure and the calculation of contact stress between metal electrode and polymer, the mechanism of coupling interaction among polymer, insulating oil and external pressure is revealed. This research on the improvement of insulation interface can provide a key reference and basis for the manufacturing and optimizing of cable insulation.Keywords
Funding Information
- National Natural Science Foundation of China (52037004)
- National Natural Science Foundation of China (52207160)
- Natural Science Foundation of Jiangsu Province (BK20220341)
- China Postdoctoral Science Foundation (2023M740642)
- Postdoctoral Research Project in Zhejiang Province (ZJ2023119)
This publication has 23 references indexed in Scilit:
- Enhancing mechanical properties of 3D printed cementitious composites utilizing hybrid recycled PP and PET fibersConstruction and Building Materials, 2024
- A manual operated and eco-friendly plasma-assisted polymerization method for enhancing surface weather resistance of insulationApplied Surface Science, 2024
- Optimizing the blending ratio and processing parameters for ternary blends of recycled polypropylene with recycled high and virgin linear low-densities polyethyleneResults in Engineering, 2023
- Interfacial microstructure and insulation properties of 500 kV EHVDC XLPE cable factory joint under different roughness and degassing durationsPolymer Degradation and Stability, 2021
- Effects of cold SF6 plasma treatment on a-C:H, polypropylene and polystyreneSurface and Coatings Technology, 2020
- Partial discharge behavior of 220 kV prefabricated cable termination induced by inadequate interface pressure2018
- Synthesis, properties and degradation of polyisobutylene–polyester graft copolymersPolymer International, 2016
- Discharge characteristics at polypropylene-silicone rubber interface under AC voltage2016
- A study of factors affecting the breakdown strength of silicone rubber2003
- Interfacial breakdown in cable joints2002