Xi Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xi Zhu has a total of 111 co-authors. Here are the top co-authors by number of shared publications:
- Zhi Fang
College of Electrical Engineering and Control Science Nanjing Tech University Nanjing China
15 shared publications - Xinglei Cui
Nanjing Tech Univ, Coll Elect Engn & Control Sci, Nanjing, Peoples R China
4 shared publications - Feng Liu
College of Electrical Engineering and Control Science, Nanjing Tech University, Nanjing, China
3 shared publications Xinglei Cui
3 shared publicationsXiuhan Guan
3 shared publications- Zhaorui Luo
Tianjin University
3 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by Institution of Engineering and Technology (IET) in High Voltage
- Vol. 11 (5) , 1524-1582
Large‐Scale Applications of Plasma Technologies: Progresses and Challenges
Plasma technologies convert electrical power into energetic electrons, ions, reactive species, radiation and heat, thereby breaking through the bottleneck of purely thermal or chemical routes and bringing impressive changes to our world. This roadmap reviews the progress and challenges of plasma technologies from a large‐scale and application‐driven perspective. It covers plasma–material interaction (i.e., surface modification, material preparation and semiconductor processing), aerospace applications (i.e., plasma propulsion, plasma‐assisted aerodynamics, plasma‐assisted ignition and combustion), applications in the energy field (i.e., industrial arc discharge, plasma catalysis for decarbonisation including CO 2 conversion, nitrogen fixation and hydrogen‐related processes, and plasma‐enabled resource recovery) and applications related to human health (i.e., biomedicine, plasma disinfection/sterilisation, agriculture and food). We also present a unified cross‐comparison of mainstream plasma sources and practical selection guidelines. Beyond reviewing these advances, this roadmap argues that the large‐scale deployment of plasma technologies will be governed by four constraints: controllability of plasma parameters and discharge modes during scale‐up, system‐level energy efficiency from grid to outcome, long‐term reliability and maintainability in realistic environments, and outcome‐relevant diagnostics and harmonised benchmarking. The authors hope this roadmap will enrich the track record and enable cutting‐edge advances in plasma technologies over the next 5–10 years.
- 30 September 2026
- Published by Institution of Engineering and Technology (IET) in High Voltage
- Vol. 11 (5) , 1524-1582
Open AccessLarge‐Scale Applications of Plasma Technologies: Progresses and Challenges
Plasma technologies convert electrical power into energetic electrons, ions, reactive species, radiation and heat, thereby breaking through the bottleneck of purely thermal or chemical routes and bringing impressive changes to our world. This roadmap reviews the progress and challenges of plasma technologies from a large‐scale and application‐driven perspective. It covers plasma–material interaction (i.e., surface modification, material preparation and semiconductor processing), aerospace applications (i.e., plasma propulsion, plasma‐assisted aerodynamics, plasma‐assisted ignition and combustion), applications in the energy field (i.e., industrial arc discharge, plasma catalysis for decarbonisation including CO 2 conversion, nitrogen fixation and hydrogen‐related processes, and plasma‐enabled resource recovery) and applications related to human health (i.e., biomedicine, plasma disinfection/sterilisation, agriculture and food). We also present a unified cross‐comparison of mainstream plasma sources and practical selection guidelines. Beyond reviewing these advances, this roadmap argues that the large‐scale deployment of plasma technologies will be governed by four constraints: controllability of plasma parameters and discharge modes during scale‐up, system‐level energy efficiency from grid to outcome, long‐term reliability and maintainability in realistic environments, and outcome‐relevant diagnostics and harmonised benchmarking. The authors hope this roadmap will enrich the track record and enable cutting‐edge advances in plasma technologies over the next 5–10 years.
- Open Access
- 14 August 2026
- Published by Institution of Engineering and Technology (IET) in High Voltage
- Vol. 11 (4) , 889-898
Thermal Stability of Plasma‐Assisted Film Deposition for Insulation Modification: In View of Hydrophobicity and Flashover Performances
Polymer insulation exposed to natural environment inevitably face challenges from material ageing and surface insulating degradation. Surface treatment is an effective method to improve material performance, but traditional processing methods such as room temperature vulcanised silicone rubber (RTV) coating, are subjected to coating degradation after long time operation. Herein, we fabricated a stable cross‐linked Si‐containing (–SiO 4 ) film on polymethyl methacrylate (PMMA) insulation via eco‐friendly atmospheric pressure plasma techniques, and verified its thermal stability performance. By addition of hexamethyldisiloxane (HMDSO) and fluorescent agent in plasma, fragmenting–crosslinking of HMDSO as well as surface functionalising by plasma‐enabled reactions lead to the fabrication of fluorescent Si‐containing film. Accelerating ageing test demonstrates that the plasma‐modified PMMA remains steady hydrophobic performance after ageing. Although the surface insulating performance decreases with the ageing, the aged material still remains the higher flashover voltage compared with the original. It reveals that the Si‐containing film could convert thermal oxygen reactions into itself crosslinking process with the shift of –SiO 2 to –SiO 4 groups, which eventually leads to the variation of material surface performance. Overall, the plasma‐assisted Si‐containing film for surface modification has satisfactory thermal stability, which offers a new avenue for insulation enhancement and service life prolonging.
- 14 August 2026
- Published by Institution of Engineering and Technology (IET) in High Voltage
- Vol. 11 (4) , 889-898
Open AccessThermal Stability of Plasma‐Assisted Film Deposition for Insulation Modification: In View of Hydrophobicity and Flashover Performances
Polymer insulation exposed to natural environment inevitably face challenges from material ageing and surface insulating degradation. Surface treatment is an effective method to improve material performance, but traditional processing methods such as room temperature vulcanised silicone rubber (RTV) coating, are subjected to coating degradation after long time operation. Herein, we fabricated a stable cross‐linked Si‐containing (–SiO 4 ) film on polymethyl methacrylate (PMMA) insulation via eco‐friendly atmospheric pressure plasma techniques, and verified its thermal stability performance. By addition of hexamethyldisiloxane (HMDSO) and fluorescent agent in plasma, fragmenting–crosslinking of HMDSO as well as surface functionalising by plasma‐enabled reactions lead to the fabrication of fluorescent Si‐containing film. Accelerating ageing test demonstrates that the plasma‐modified PMMA remains steady hydrophobic performance after ageing. Although the surface insulating performance decreases with the ageing, the aged material still remains the higher flashover voltage compared with the original. It reveals that the Si‐containing film could convert thermal oxygen reactions into itself crosslinking process with the shift of –SiO 2 to –SiO 4 groups, which eventually leads to the variation of material surface performance. Overall, the plasma‐assisted Si‐containing film for surface modification has satisfactory thermal stability, which offers a new avenue for insulation enhancement and service life prolonging.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- p. 1
Competition Between Degradation and Deposition During Treating Biaxially Oriented Polypropylene Films by Nanosecond-Pulsed Atmospheric-Pressure Plasma Jet
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- p. 1
Competition Between Degradation and Deposition During Treating Biaxially Oriented Polypropylene Films by Nanosecond-Pulsed Atmospheric-Pressure Plasma Jet
- 3 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
Improved Interface Reliability and Critical Current Retention in Multifilamentary REBCO Tapes via a Plasma-Deposited Film
With the widespread application of high-temperature superconducting (HTS) REBCO tapes in energy, healthcare, and transportation, their operating environments have become increasingly complex, placing higher demands on stability. Although multifilamentary REBCO tapes can reduce AC loss, exposure of REBCO compounds without stabilizing layers leads to moisture-induced degradation and performance failure. This study proposes a plasma-driven film deposition method using an atmospheric pressure plasma jet (APPJ) with hexamethyldisiloxane (HMDSO) to enhance the hydrophobicity of REBCO tapes. Results show that after the plasma film deposition, the water contact angle (WCA) on the tape surface increases from 94° to 138°. A new Si-O-based film with a spherical cluster morphology was deposited onto the tape surface. Scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS) confirms that the coating is primarily composed of Si and O rather than the underlying tape elements (Cu, Y, Ba). Furthermore, critical current retention tests revealed a degradation in the critical current of untreated multifilamentary REBCO tapes over time, while the samples treated with plasma-deposited films exhibited minimal variation, indicating excellent critical current stability. After liquid nitrogen bathing, the film maintains considerable stability in hydrophobicity performance and chemical composition, demonstrating the feasibility of the plasma film fabrication for hydrophobicity improvement of superconducting tapes. This study presents an effective plasma coating method to prevent hydrolysis in multifilamentary REBCO tapes, thereby enhancing their electrical stability performance and providing crucial technical support for the design of high-performance tapes.
- 3 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
Improved Interface Reliability and Critical Current Retention in Multifilamentary REBCO Tapes via a Plasma-Deposited Film
With the widespread application of high-temperature superconducting (HTS) REBCO tapes in energy, healthcare, and transportation, their operating environments have become increasingly complex, placing higher demands on stability. Although multifilamentary REBCO tapes can reduce AC loss, exposure of REBCO compounds without stabilizing layers leads to moisture-induced degradation and performance failure. This study proposes a plasma-driven film deposition method using an atmospheric pressure plasma jet (APPJ) with hexamethyldisiloxane (HMDSO) to enhance the hydrophobicity of REBCO tapes. Results show that after the plasma film deposition, the water contact angle (WCA) on the tape surface increases from 94° to 138°. A new Si-O-based film with a spherical cluster morphology was deposited onto the tape surface. Scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS) confirms that the coating is primarily composed of Si and O rather than the underlying tape elements (Cu, Y, Ba). Furthermore, critical current retention tests revealed a degradation in the critical current of untreated multifilamentary REBCO tapes over time, while the samples treated with plasma-deposited films exhibited minimal variation, indicating excellent critical current stability. After liquid nitrogen bathing, the film maintains considerable stability in hydrophobicity performance and chemical composition, demonstrating the feasibility of the plasma film fabrication for hydrophobicity improvement of superconducting tapes. This study presents an effective plasma coating method to prevent hydrolysis in multifilamentary REBCO tapes, thereby enhancing their electrical stability performance and providing crucial technical support for the design of high-performance tapes.
- 30 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (44) , 29814-29825
Plasma Interface Modification Endows Bilayered Polypropylene Insulation with Suppressed Space Charge and Enhanced Breakdown Strength for Submarine Cable Joint
High-voltage direct current submarine cables are essential for developing cross-sea transmission and clean energy production. However, due to the limited length (2O precursor concentration are adjusted to modify the physicochemical state of the interface. Results show that the 7 min treatment with H2O concentration of 1.0% yields the most significant performance improvement. Following this treatment, the protruding spikes on the CI surface are effectively etchedaway, thereby reducing microdefects during the interface welding process. This reduction in microdefects suppresses heterocharge accumulation by 66% and increases breakdown strength by 8.2%. Furthermore, the incorporation of H2O introduces foreign oxygen-containing groups (hydroxyl group -OH and methoxy group -OCH3) to the interface, significantly increasing trap depth (1.06 to 1.15 eV) and the density of deep traps in the interface region. Density functional theory calculations and interface modeling elucidate charge behavior in the interfacial region and demonstrate that a uniform interface morphology reduces electric-field distortion and weakens charge injection into the interface region. In addition, the oxygen-containing groups act as charge-capture centers that hinder the migration of heterocharges across the interface, thereby further lowering interfacial charge density and mitigating electric-field distortion. Overall, the interface-modification strategy for PP bilayered insulation proposed in this paper can help extend submarine cable joint lifetime and provide a key reference for the manufacturing of high-performance bilayered insulation interfaces.
- 30 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (44) , 29814-29825
Plasma Interface Modification Endows Bilayered Polypropylene Insulation with Suppressed Space Charge and Enhanced Breakdown Strength for Submarine Cable Joint
High-voltage direct current submarine cables are essential for developing cross-sea transmission and clean energy production. However, due to the limited length (2O precursor concentration are adjusted to modify the physicochemical state of the interface. Results show that the 7 min treatment with H2O concentration of 1.0% yields the most significant performance improvement. Following this treatment, the protruding spikes on the CI surface are effectively etchedaway, thereby reducing microdefects during the interface welding process. This reduction in microdefects suppresses heterocharge accumulation by 66% and increases breakdown strength by 8.2%. Furthermore, the incorporation of H2O introduces foreign oxygen-containing groups (hydroxyl group -OH and methoxy group -OCH3) to the interface, significantly increasing trap depth (1.06 to 1.15 eV) and the density of deep traps in the interface region. Density functional theory calculations and interface modeling elucidate charge behavior in the interfacial region and demonstrate that a uniform interface morphology reduces electric-field distortion and weakens charge injection into the interface region. In addition, the oxygen-containing groups act as charge-capture centers that hinder the migration of heterocharges across the interface, thereby further lowering interfacial charge density and mitigating electric-field distortion. Overall, the interface-modification strategy for PP bilayered insulation proposed in this paper can help extend submarine cable joint lifetime and provide a key reference for the manufacturing of high-performance bilayered insulation interfaces.
- 15 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 32 (3) , 1289-1296
Improvement of Polypropylene/Silicone Rubber Interface by Insulating Oils With Pressure Optimization
Cable accessory insulation system is inevitably affected by its interface states causing insulation failure. Insulating oils are often applied in the interface with a certain pressure to improve its performance, but the mismatching and degradation of polymer in insulating oils seriously affects the interface stability. This study focuses on polypropylene (PP) insulation and aims to improve its typical accessory interface with silicone rubber (SIR) by insulating oils with pressure. Results show that hydrocarbon oil has the biggest negative impact on PP with the most mass increment, more surface deposits and significant deteriorating in both mechanical and electrical properties. By contrast, appropriate absorption of Si-containing oil helps modify surface and fill initial defects of PP, promoting insulating performance. Furthermore, it is found that interface pressure is conductive to fabricate a stable PP/insulating oil/SIR structure with excellent insulating performance. However, excessive pressure causes a negative impact due to interface deformation of materials. Based on the analysis of interface microstructure and the calculation of contact stress between metal electrode and polymer, the mechanism of coupling interaction among polymer, insulating oil and external pressure is revealed. This research on the improvement of insulation interface can provide a key reference and basis for the manufacturing and optimizing of cable insulation.
- 15 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 32 (3) , 1289-1296
Improvement of Polypropylene/Silicone Rubber Interface by Insulating Oils With Pressure Optimization
Cable accessory insulation system is inevitably affected by its interface states causing insulation failure. Insulating oils are often applied in the interface with a certain pressure to improve its performance, but the mismatching and degradation of polymer in insulating oils seriously affects the interface stability. This study focuses on polypropylene (PP) insulation and aims to improve its typical accessory interface with silicone rubber (SIR) by insulating oils with pressure. Results show that hydrocarbon oil has the biggest negative impact on PP with the most mass increment, more surface deposits and significant deteriorating in both mechanical and electrical properties. By contrast, appropriate absorption of Si-containing oil helps modify surface and fill initial defects of PP, promoting insulating performance. Furthermore, it is found that interface pressure is conductive to fabricate a stable PP/insulating oil/SIR structure with excellent insulating performance. However, excessive pressure causes a negative impact due to interface deformation of materials. Based on the analysis of interface microstructure and the calculation of contact stress between metal electrode and polymer, the mechanism of coupling interaction among polymer, insulating oil and external pressure is revealed. This research on the improvement of insulation interface can provide a key reference and basis for the manufacturing and optimizing of cable insulation.