This talk will overview work within the H2NEW Consortium to accelerate joint research efforts 1 . A performance benchmark and test protocol is established and validated as a baseline system to enable meaningful comparison of results across the research community. Three U.S. National Laboratories have harmonized and validated the equipment and procedures to confirm the minimum requirements for test stations, cell hardware, cell test procedure, and the fabrication of a baseline material set, while maintaining maximum agreement of test results. The baseline membrane electrode assembly (MEA) features significantly lower loadings than commercially available and is referred to as the “Future Generation MEA (FuGeMEA)”. It consists of commercially available materials and is used as a baseline material set for research and development across the consortium. The detailed MEA fabrication procedures and protocol will be summarized 1 . A phased harmonization approach allowed for isolating and addressing sources of variation. I will summarize the troubleshooting experiments that have yielded a set of Lessons Learned to aid others in identifying equipment or protocol deviations and/or shortcomings that can compromise comparability and repeatability of test results. In the final phase, the participating laboratories separately fabricate the FuGeMEA and conduct the harmonized test protocol to obtain cell performance results with a maximum standard deviation of 18 mV at 4 A cm -2 . This work thus establishes the FuGeMEA performance benchmark and test protocol as a baseline system for broad use in test equipment validation and comparison of performance results across the research community. 1 Proton exchange membrane electrolysis benchmarking: Identifying and removing sources of variation in test stations, hardware, and membrane electrode assembly fabrication. International Journal of Hydrogen Energy , Volume 114, 2025, Pages 486-496. https://doi.org/10.1016/j.ijhydene.2025.02.443