RGRamchandra Gawas

Ramchandra Gawas

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ramchandra Gawas has a total of 85 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Unmasking Ionomer Degradation in Cathode Catalyst Layers of Polymer Electrolyte Fuel Cells

    by Catherine Weiss, Ramchandra Gawas, Sarah Stewart, Ahmet Kusoglu, Rangachary Mukundan

    The widespread deployment of proton exchange membrane fuel cells (PEMFCs) in demanding heavy-duty vehicle applications requires longer system lifetimes necessitating unprecedented durability. While the degradation mechanisms of the bulk perfluorosulfonic acid ionomer membrane are well documented, the susceptibility of the nanometer-thin catalyst layer (CL) ionomer films in electrodes remains a critical unanswered question. Here, we conclusively demonstrate that the current membrane accelerated stress test (AST) does induce CL ionomer degradation through changes in the CL ionomer properties, primarily the CL ionic resistance, when compared to two control tests. The CL ionomer degradation from the AST decreases the PEMFC performance by approximately 90 mV @ 1 A cm–2. Moreover, we demonstrate that this CL ionomer degradation can be eliminated by the incorporation of cerium, a common membrane additive to scavenge radicals.


  • Engineered Membranes for PEM Water Electrolysis at High Differential Pressure

    by Ramchandra Gawas, Paul E. Rudnicki, Dylan Bauer, Xiong Peng, Rangachary Mukundan

    Hydrogen, a versatile energy alternative with an ability to enhance energy security across various industries, will be a pivotal component in advancing sustainability and energy resiliency.1 Among existing technologies, proton exchange membrane water electrolysis (PEMWE) remains a frontrunner for hydrogen production due to its ability integrate with various energy sources, flexibility in implementation, and end-use applications.2 Achieving large-scale deployment of PEMWE systems for economic H2 production necessitates the use of thinner membranes to minimize ohmic losses at high current densities and differential pressure operation to enhance overall system efficiency.3 Thin membranes under high differential pressures (>25 barg) cause significant hydrogen crossover posing safety and durability challenges for long-term PEMWE operation.4 Existing approaches to tackle safety concerns involve the use of gas recombination catalysts in the PEMs.5 These catalysts combine H2 and O2, lowering the hydrogen content at the anode. However, the catalytic recombination reaction in the membrane could potentially generate radicals-hydroxyl, peroxyl, known to be detrimental to perfluoro sulfonic acid (PFSA) ionomers that are commonly used as PEMs.6

  • Mixed-Potential-Driven Degradation of Pemwe Recombination Catalysts: A Modeling Study

    by Paul E. Rudnicki, Timothy Nathan Stovall, Ramchandra Gawas, Rangachary Mukundan, Adam Z. Weber

    Proton-exchange-membrane water electrolysis (PEMWE) can efficiently and sustainably generate compressed hydrogen when operated with thin membranes and high cathode backpressures. Unfortunately, these conditions also promote gas permeation through the membrane, creating flammability concerns for the anode outlet stream. Incorporation of gas recombination catalysts (RCs) into the membrane enables safe operation of PEMWE cells under these conditions by recombining permeating hydrogen and oxygen gases. While RCs have been consistently shown to increase the range of safe operating conditions at beginning-of-life (BOL), less is known about their durability or their effects on membrane durability, which both depend on the floating potential of these catalysts within the membrane during PEMWE. RCs held at high potentials pinned to the oxygen reduction reaction (ORR) have been shown to lose electrochemically-active surface area (ECSA) over time, while Pt at low potentials pinned to the hydrogen oxidation reaction (HOR) has been shown to increase fluoride emission rates and membrane degradation, likely due to local hydrogen peroxide generation. In this talk, we will introduce our developed two-dimensional multiphysics finite-element model of a PEMWE cell, which calculates the local floating potential of RCs as a function of RC location, cathode backpressure, and current density. This model can predict regimes of operation which lead to increased RC or membrane degradation rates, thereby assisting optimized design and operation to balance safety, efficiency, and durability of RC-containing PEMWE cells.

  • PEM Electrolysis Benchmarking: Lessons Learned in Identifying and Removing Sources of Variation in Test Stations, Hardware, and MEA Fabrication

    by James L. Young, Makenzie Parimuha, Keonhag Lee, Abdurrahman Yilmaz, Sergio Diaz-Abad, Ramchandra Gawas, Tobias Schuler, Siddharth Komini Babu, Guido Bender

    This talk will overview work within the H2NEW Consortium to accelerate joint research efforts 1 . A performance benchmark and test protocol is established and validated as a baseline system to enable meaningful comparison of results across the research community. Three U.S. National Laboratories have harmonized and validated the equipment and procedures to confirm the minimum requirements for test stations, cell hardware, cell test procedure, and the fabrication of a baseline material set, while maintaining maximum agreement of test results. The baseline membrane electrode assembly (MEA) features significantly lower loadings than commercially available and is referred to as the “Future Generation MEA (FuGeMEA)”. It consists of commercially available materials and is used as a baseline material set for research and development across the consortium. The detailed MEA fabrication procedures and protocol will be summarized 1 . A phased harmonization approach allowed for isolating and addressing sources of variation. I will summarize the troubleshooting experiments that have yielded a set of Lessons Learned to aid others in identifying equipment or protocol deviations and/or shortcomings that can compromise comparability and repeatability of test results. In the final phase, the participating laboratories separately fabricate the FuGeMEA and conduct the harmonized test protocol to obtain cell performance results with a maximum standard deviation of 18 mV at 4 A cm -2 . This work thus establishes the FuGeMEA performance benchmark and test protocol as a baseline system for broad use in test equipment validation and comparison of performance results across the research community. 1 Proton exchange membrane electrolysis benchmarking: Identifying and removing sources of variation in test stations, hardware, and membrane electrode assembly fabrication. International Journal of Hydrogen Energy , Volume 114, 2025, Pages 486-496. https://doi.org/10.1016/j.ijhydene.2025.02.443

  • Hydrogen Crossover Phenomenon in PEM Water Electrolyzers Operating at High Differential Pressures

    by Ramchandra Gawas, Xiong Peng, Rangachary Mukundan

    Proton exchange membrane water electrolyzers (PEMWEs) offer a promising pathway to produce hydrogen with low carbon footprint. However, cost, efficiency and durability are still barriers to the commercialization of this technology. The use of thin membranes under differential pressure remains a major challenge due to significant hydrogen crossover from the cathode to the anode. This not only slightly reduces system efficiency but also poses a safety hazard, as the presence of more than 4% hydrogen in oxygen at the anode forms a flammable gas mixture. Therefore, to safely and efficiently operate PEMWEs, it is essential to implement gas recombination catalysts (GRC) that combine hydrogen with oxygen, thereby lowering the hydrogen concentration at the anode. Designing such GRC strategies that effectively consume H 2 requires a comprehensive understanding of gas crossover in these systems. In our previous work, we found that PEMWEs exhibit noticeable hydrogen oxidation current (HOR) under differential pressure. 1 These HOR currents, only observed at differential pressures, are diffusion-limited and consume a significant portion of permeated hydrogen. Therefore, we combined in-operando gas chromatography measurements at the anode outlet with HOR current measurements to calculate hydrogen crossover rates as a function of cathode backpressure and current density for various PEMWE architectures. Our results show that H 2 crossover rates increase as a function of differential pressure as well as current density revealing two distinct gas permeation mechanisms- diffusion or pressure driven pathway and supersaturation or concentration driven pathway (Figure 1). The effect of current density is slightly weaker at high current densities (above 2 A.cm -2 ), where supersaturation competes with the water permeation from anode to cathode due to the electroosmotic drag. Additionally, we will also present our findings on the effect of the GRC architecture and the location of the GRC in the membrane on reducing the H 2 content at the anode. Acknowledgements: This research is supported by the U.S. Department of Energy (DOE) Hydrogen and Fuel Cell Technologies Office (HFTO) through the Hydrogen from Next-generation Electrolyzers of Water (H2NEW) consortium. References: Gawas, R.; Kushner, D.; Peng, X.; Mukundan, R. Importance Hydrogen Oxidation Reaction Current in Quantifying Hydrogen Crossover in PEM Water Electrolyzers at High Differential Pressure. Energy Environ. Sci., 2025 , DOI: 10.1039/d5ee00048c. Figure 1

  • The Performance and Durability Evaluation of Amorphous and Rutile Iridium Catalysts in the Anode Catalyst Layer of Proton Exchange Membrane Water Electrolysis

    by Ai-Lin Chan, Haoran Yu, Jaehyung Park, Matthew Edward Sweers, A. Jeremy Kropf, Ramchandra Gawas, Rangachary Mukundan, Deborah J. Myers, Alexey Serov, Shaun M Alia

    Proton exchange membrane water electrolysis (PEMWE) is a key technique in low temperature electrolysis for hydrogen production. For electrochemical water splitting, iridium (Ir)-based catalysts are often used for oxygen evolution reaction (OER) at the anode due to the moderate activity and stability in acid environment. Catalyst intrinsic activity and performance stability are crucial for developing next generation of anode catalyst and for enabling lower Ir loading, decreasing PEMWE capital cost, and expanding the adoption of this technology 1,2 . In this study, we evaluated the performance and durability of low loading anode catalyst layers (0.4 mg Ir /cm 2 ) with different crystallinity of IrO x catalysts (amorphous group: Alfa Aesar (AA), TKK77100 and Johnson Matthey (JM); rutile group: TKK77110, Pajarito and Furuya) in single cell testing for 2000 h. The catalysts with the majority of IrO x having an amorphous structure had lower kinetic losses, due to higher OER activity and higher surface area 3 . Compared to the baseline catalyst (AA), TKK77100 and JM had around 22 – 25 mV lower kinetic losses, while the cells with rutile catalysts had lower beginning of test performance. Under long term operation, however, rutile Ir catalysts displayed higher stability with lower decay rate of HFR-free voltages (9.75 – 10.9 µV/h at 0.1 A/cm 2 ). The decay rates of the amorphous group ranged from 20.4 – 21.8 µV/h at 0.1 A/cm 2 in the 2000 h test. By electrochemical impedance spectroscopy (EIS) analysis and modeling, the kinetic performance losses of amorphous Ir were correlated to the pronounced increase of polarization resistance and the significant decrease in equivalent capacitance, especially in the first 500 h, which suggested amorphous Ir tended to have higher losses in available site access and thus degraded faster. The catalysts with lower decay rates were tested for 4000 h to probe catalysts stability in longer duration via in situ and ex situ characterization methods. Understanding the kinetic features and long term behaviors of different Ir catalysts is important for developing high performing and durable anode catalyst layer and advancing PEMWE technology. Reference: S. M. Alia, Current Opinion in Chemical Engineering , 33 , 100703 (2021). K. Ayers et al., Annual Review of Chemical and Biomolecular Engineering , 10 , 219–239 (2019). V. Pfeifer et al., Chem. Sci. , 8 , 2143–2149 (2017). Figure 1

  • Exploring the Hydrogen-Loss Inventory in PEMWE Cells

    by Paul E. Rudnicki, Arthur Dizon, Ramchandra Gawas, Adam Z. Weber

    Operating proton-exchange-membrane water-electrolysis (PEMWE) cells at high differential pressures and with thin membranes can significantly reduce the energy required to generate compressed hydrogen. However, under these conditions, crossover of dissolved gases increases, leading to efficiency losses through a range of chemical and electrochemical hydrogen consumption reactions as well as safety concerns at the anode outlet. Mitigating these efficiency losses requires an understanding of the relative prevalence and interdependence of gas transport and consumption mechanisms, which are challenging to unambiguously differentiate through experimental methods. In this talk, we will introduce our developed multiphysics finite-element model of a PEMWE cell that accounts for all major hydrogen loss mechanisms, enabling unambiguous delineation of the fate of all produced hydrogen, allowing a study of the dependence of each mechanism on operating conditions and membrane thickness, and exploring the impact of including a gas-recombination layer. Findings demonstrate that hydrogen oxidation at the anode and recombination on the PTL surface can cause significant losses at low current densities, while losses at the cathode due to oxygen crossover dominate at high current densities. The incorporation of a gas-recombination layer decreases oxygen crossover losses at low current densities and hydrogen oxidation reaction losses at high current densities. By quantifying the causes of hydrogen loss and detailing the hydrogen mole balance in finer resolution than previously achieved, this model assists in the rational design of maximally efficient PEM water electrolyzers.

  • Effect of Contaminates and Additives on Degradation in Fuel Cells

    by Catherine M. Weiss, Evan F. Johnson, Ramchandra Gawas, Rangachary Mukundan

    Proton Exchange Membrane Fuel Cells (PEMFC) are a technology gaining traction for hydrogen-fueled transportation applications, especially for heavy-duty vehicles. The stringent durability requirements for heavy-duty application (>25,000 hours) require a better understanding of the degradation mechanism and development of mitigation strategies for improving the durability. In particular, the durability of the membrane-electrode assemblies (MEA) is a key research area especially with growing interest of accelerated stress testing (AST) developed for heavy-duty applications. The current mitigation strategies for the proton exchange membrane are adding radical scavengers to minimize the chemical degradation induced by radical attacks and reinforcing the membrane for maximizing mechanical endurance. However, it is yet to be fully understood how the chemical decomposition pathways change in the presence of cationic contaminants and cerium-based additives. The most damaging contaminant is iron due to its ability to catalyst the decomposition of hydrogen peroxide to hydroxyl radical, Fenton’s reagent, which exacerbates membrane degradation. Here, we investigate the chemical degradation of fuel cell membranes using accelerated stress tests under different conditions while characterizing the change in membrane resistance, H 2 permeability, fuel cell performance, and fluoride emission rate over time. These results will be used to provide new insights on the degradation mechanism pathways with a focus on the interplay of contaminants and additives governing the lifetime of the fuel cell membranes. The refinement of the membrane/MEA accelerated stress tests for heavy-duty transportation applications will also be discussed.


  • Open Access

    Unveiling the Origin of Morphological Instability in Topologically Complex Electrocatalytic Nanostructures

    by Yawei Li, James L. Hart, Ramchandra Gawas, Zhiyong Xia, Pietro P. Lopes, Jieyu Zhang, Siming Li, Yucheng Wang, Mitra Taheri, Ian McCue, et al.

    Coarsening and degradation phenomena in metals have largely focused on thermally driven processes, such as bulk and surface diffusion. However, dramatic coarsening has been reported in high-surface-area, nanometer-sized Pt-based catalysts during potential cycling in an electrolyte at room temperature─a temperature too low for the process to be explained purely by surface mobility values measured in both vacuum and electrolytes (∼10-22 and ∼10-18 cm2/s, respectively). This morphological evolution must be due to a different mechanism for mass transport that is sensitive to electrochemical conditions (e.g., electrolyte composition, potential limits, and scan rate). However, there have been no notable studies of electrochemically induced coarsening in nanometer-sized electrocatalysts. Here, we unveil the origins of coarsening in an electrolyte through coupled in situ experiments and atomistic kinetic Monte Carlo (kMC) simulations. Our work demonstrates electrochemical coarsening is driven by two concurrent mechanisms that can be explained at the atomistic level: (i) dissolution/redeposition during the reduction of an oxidized species and (ii) rapid surface diffusion of undercoordinated atoms.


  • Open Access

    Importance of hydrogen oxidation reaction current in quantifying hydrogen crossover in PEM water electrolyzers at high differential pressure

    by Ramchandra Gawas, Douglas I. Kushner, Xiong Peng, Rangachary Mukundan

    Understanding hydrogen permeation in proton exchange membrane water electrolyzers (PEMWEs) operating at high differential pressures (>25 bar) is critical towards developing effective gas recombination strategies that enable safe operation and high efficiency. Developing this understanding relies on accurate quantification of hydrogen crossover rates in water electrolyzers operating under such conditions. In this work, we show that PEMWEs operating at high differential pressures exhibit noticeable hydrogen oxidation reaction (HOR) currents. As the HOR consumes part of the permeated hydrogen at the anode, neglecting HOR currents leads to severe underestimation of the hydrogen crossover rate. We implemented a new method combining hydrogen oxidation current with online gas chromatography measurements to accurately quantify hydrogen crossover rates as a function of operating current density in PEMWEs operating at high differential pressures (10–30 barg).