Flexural Properties of PAN‐ and Pitch‐Based Carbon Fibers
Authors:
Open Access
- 5 January 2009
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 92 (1) , 186-192
Abstract
The flexural properties of ultrahigh tensile strength polyacrylonitrile‐based (T1000GB), ultrahigh modulus pitch‐based (K13D), and high ductility pitch‐based (XN‐05) carbon fibers have been investigated using a three‐point bending test at various span lengths ranging from 200 to 1500 μm. The flexural modulus and flexural strength of these carbon fibers were measured at room temperature. The fracture surfaces under bending were examined using a high‐resolution scanning electron microscope to identify the origin of the failure. Statistical distributions of the flexural strength (maximum flexural stress at 200 μm span length) were then characterized. The Weibull modulus for the T1000GB, K13D, and XN‐05 fibers were calculated to be 11.7, 11.8, and 11.7, which is higher than those obtained from the tensile test.Keywords
This publication has 24 references indexed in Scilit:
- Tensile properties of ultrahigh strength PAN-based, ultrahigh modulus pitch-based and high ductility pitch-based carbon fibersCarbon, 2008
- Effect of Paraffin Oil Used as a Lubricant in Tensile Tests of Carbon Fibre BundlesMaterials Science Forum, 2006
- Transverse and Longitudinal CTE Measurements of Carbon Fibers and their Impact on Interfacial Residual Stresses in CompositesJournal of Composite Materials, 2006
- Direct Observation of Nanocrystallite Buckling in Carbon Fibers under Bending LoadPhysical Review Letters, 2005
- Precursors for Carbon Fiber Manufacture2005
- Manufacturing Techniques for Carbon Fiber Reinforced Composites in Thermoset and Thermoplastic Matrices2005
- Guidelines for the Design of Equipment for Carbon Fiber Plant2005
- Elastic moduli of nanocrystallites in carbon fibers measured by in-situ X-ray microbeam diffractionCarbon, 2003
- Influence of Threshold Stress on the Estimation of the Weibull StatisticsJournal of the American Ceramic Society, 2002
- On non-Hookean behaviour of carbon fibres in bendingJournal of Materials Science, 1993