Synthetic turf finite element model development and validation
Open Access
- 12 February 2024
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology
- Vol. 240 (1) , 160-175
Abstract
Assessment of synthetic turf performance has been undertaken using a variety of experimental methods but is limited in understanding the complex physics of cleat-turf interaction. Computational models could provide insight, but there is currently no validated model of synthetic turf available. The scope of this study was to develop a Finite Element (FE) model of synthetic turf using a hierarchical approach and validate the model using independent test data. A physical third-generation synthetic turf comprising slit-film fibers with sand and rubber crumb infill was constructed. Experiments were conducted using a direct impact (Clegg) device and an artificial cleat-form. Material characterization tests were performed on the individual turf components, integrated into constitutive models, and a full turf FE model was constructed. The carpet was modeled with shell elements while the granular infill was modeled using smoothed-particle hydrodynamics (SPH) elements. A method to simulate the physical pre-conditioning performed on the experimental turf was developed. Both unconditioned and pre-conditioned turfs were assessed using Clegg tests. The re-created Clegg tests on the turf model demonstrated good agreement with the physical tests, with higher acceleration for the pre-conditioned turf. The turf model was validated using experiments with a turf test apparatus including dynamic translation and rotation of a cleat-form. The model predicted results in good agreement with the experiments (average CORA rating of 0.863) on pre-conditioned turf. The resulting model and methods can be expanded to synthetic turf of different constituent materials, to investigate their effects on cleat-surface interaction, optimizing performance, and reducing injury risk.Keywords
This publication has 17 references indexed in Scilit:
- An experimental and numerical study on the compressive behavior of sand-rubber particle mixturesComputers and Geotechnics, 2018
- Three-dimensional discrete element modeling of direct shear test for granular rubber–sandComputers and Geotechnics, 2018
- Micromechanical analyses of the effect of rubber size and content on sand-rubber mixtures at the critical stateGeotextiles and Geomembranes, 2017
- The mechanics of American football cleats on natural grass and infill-type artificial playing surfaces with loads relevant to elite athletesSports Biomechanics, 2015
- The effect of field condition and shoe type on lower extremity injuries in American FootballBritish Journal of Sports Medicine, 2013
- An Analysis of Specific Lower Extremity Injury Rates on Grass and FieldTurf Playing Surfaces in National Football League GamesThe American Journal of Sports Medicine, 2012
- Development and assessment of a device and method for studying the mechanical interactions between shoes and playing surfacesin situat loads and rates generated by elite athletesSports Biomechanics, 2012
- Influence of stretching on the resilience of LLDPE monofilaments for application in artificial turfJournal of Applied Polymer Science, 2011
- Artificial turf systems for sport surfaces: current knowledge and research needsProceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 2011
- Scale and other factors affecting the results of pull-out tests of grids buried in sandGéotechnique, 1989