Michael C. Bustamante
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Michael C. Bustamante has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Duane Steven Cronin
Department of Mechanical and Mechatronics Engineering University of Waterloo Waterloo Ontario Canada
3 shared publications Aleksander L Rycman
Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON, Canada
1 shared publication- Brock Watson
Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON, Canada
1 shared publication Cody O’CAin
Biomechanics Consulting and Research, LLC, Charlottesville, VA, USA
1 shared publicationDilaver Singh
University of Waterloo
1 shared publicationDuane S Cronin
Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON, Canada
1 shared publication
Latest Publications
- Open Access
- 12 February 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology
- Vol. 240 (1) , 160-175
Synthetic turf finite element model development and validation
Assessment of synthetic turf performance has been undertaken using a variety of experimental methods but is limited in understanding the complex physics of cleat-turf interaction. Computational models could provide insight, but there is currently no validated model of synthetic turf available. The scope of this study was to develop a Finite Element (FE) model of synthetic turf using a hierarchical approach and validate the model using independent test data. A physical third-generation synthetic turf comprising slit-film fibers with sand and rubber crumb infill was constructed. Experiments were conducted using a direct impact (Clegg) device and an artificial cleat-form. Material characterization tests were performed on the individual turf components, integrated into constitutive models, and a full turf FE model was constructed. The carpet was modeled with shell elements while the granular infill was modeled using smoothed-particle hydrodynamics (SPH) elements. A method to simulate the physical pre-conditioning performed on the experimental turf was developed. Both unconditioned and pre-conditioned turfs were assessed using Clegg tests. The re-created Clegg tests on the turf model demonstrated good agreement with the physical tests, with higher acceleration for the pre-conditioned turf. The turf model was validated using experiments with a turf test apparatus including dynamic translation and rotation of a cleat-form. The model predicted results in good agreement with the experiments (average CORA rating of 0.863) on pre-conditioned turf. The resulting model and methods can be expanded to synthetic turf of different constituent materials, to investigate their effects on cleat-surface interaction, optimizing performance, and reducing injury risk.
- 12 February 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology
- Vol. 240 (1) , 160-175
Open AccessSynthetic turf finite element model development and validation
Assessment of synthetic turf performance has been undertaken using a variety of experimental methods but is limited in understanding the complex physics of cleat-turf interaction. Computational models could provide insight, but there is currently no validated model of synthetic turf available. The scope of this study was to develop a Finite Element (FE) model of synthetic turf using a hierarchical approach and validate the model using independent test data. A physical third-generation synthetic turf comprising slit-film fibers with sand and rubber crumb infill was constructed. Experiments were conducted using a direct impact (Clegg) device and an artificial cleat-form. Material characterization tests were performed on the individual turf components, integrated into constitutive models, and a full turf FE model was constructed. The carpet was modeled with shell elements while the granular infill was modeled using smoothed-particle hydrodynamics (SPH) elements. A method to simulate the physical pre-conditioning performed on the experimental turf was developed. Both unconditioned and pre-conditioned turfs were assessed using Clegg tests. The re-created Clegg tests on the turf model demonstrated good agreement with the physical tests, with higher acceleration for the pre-conditioned turf. The turf model was validated using experiments with a turf test apparatus including dynamic translation and rotation of a cleat-form. The model predicted results in good agreement with the experiments (average CORA rating of 0.863) on pre-conditioned turf. The resulting model and methods can be expanded to synthetic turf of different constituent materials, to investigate their effects on cleat-surface interaction, optimizing performance, and reducing injury risk.
- 29 January 2024
- Published by ASME International in Journal of Biomechanical Engineering
- Vol. 146 (3) , 1-24
Impact Location Dependence of Behind Armor Blunt Trauma Injury Assessed Using a Human Body Finite Element Model
Behind armor blunt trauma (BABT), resulting from dynamic deformation of protective ballistic armor into the thorax, is currently assessed assuming a constant threshold of maximum backface deformation (BFDs) (44 mm). Although assessed for multiple impacts on the same armor, testing is focused on armor performance (shot-to-edge and shot-to-shot) without consideration of the underlying location on the thorax. Previous studies identified the importance of impacts on organs of animal surrogates wearing soft armor. However, the effect of impact location was not quantified outside the threshold of 44 mm. In the present study, a validated biofidelic advanced human thorax model (50th percentile male) was utilized to assess the BABT outcome from varying impact location. The thorax model was dynamically loaded using a method developed for recreating BABT impacts, and BABT events within the range of real-world impact severities and locations were simulated. It was found that thorax injury depended on impact location for the same BFDs. Generally, impacts over high compliance locations (anterolateral rib cage) yielded increased thoracic compression and loading on the lungs leading to pulmonary lung contusion (PLC). Impacts at low compliance locations (top of sternum) yielded hard tissue fractures. Injuries to the sternum, ribs, and lungs were predicted at BFDs lower than 44 mm for low compliance locations. Location-based injury risk curves demonstrated greater accuracy in injury prediction. This study quantifies the importance of impact location on BABT injury severity and demonstrates the need for consideration of location in future armor design and assessment.
- 29 January 2024
- Published by ASME International in Journal of Biomechanical Engineering
- Vol. 146 (3) , 1-24
Impact Location Dependence of Behind Armor Blunt Trauma Injury Assessed Using a Human Body Finite Element Model
Behind armor blunt trauma (BABT), resulting from dynamic deformation of protective ballistic armor into the thorax, is currently assessed assuming a constant threshold of maximum backface deformation (BFDs) (44 mm). Although assessed for multiple impacts on the same armor, testing is focused on armor performance (shot-to-edge and shot-to-shot) without consideration of the underlying location on the thorax. Previous studies identified the importance of impacts on organs of animal surrogates wearing soft armor. However, the effect of impact location was not quantified outside the threshold of 44 mm. In the present study, a validated biofidelic advanced human thorax model (50th percentile male) was utilized to assess the BABT outcome from varying impact location. The thorax model was dynamically loaded using a method developed for recreating BABT impacts, and BABT events within the range of real-world impact severities and locations were simulated. It was found that thorax injury depended on impact location for the same BFDs. Generally, impacts over high compliance locations (anterolateral rib cage) yielded increased thoracic compression and loading on the lungs leading to pulmonary lung contusion (PLC). Impacts at low compliance locations (top of sternum) yielded hard tissue fractures. Injuries to the sternum, ribs, and lungs were predicted at BFDs lower than 44 mm for low compliance locations. Location-based injury risk curves demonstrated greater accuracy in injury prediction. This study quantifies the importance of impact location on BABT injury severity and demonstrates the need for consideration of location in future armor design and assessment.
- 2 October 2018
- Published by Springer Nature
- p. 95-99
Assessment of Fluid Cavitation Threshold Using a Polymeric Split Hopkinson Bar-Confinement Chamber Apparatus
- 2 October 2018
- Published by Springer Nature
- p. 95-99
Assessment of Fluid Cavitation Threshold Using a Polymeric Split Hopkinson Bar-Confinement Chamber Apparatus
- 1 January 2016
- Published by Springer Nature
- p. 43-51
Modified Hopkinson Apparatus to Investigate Fluid Cavitation as a Potential Source of Injury
- 1 January 2016
- Published by Springer Nature
- p. 43-51
Modified Hopkinson Apparatus to Investigate Fluid Cavitation as a Potential Source of Injury