Near-Net Shape Manufacture of Ultra-High Strength Maraging Steel Using Flow Forming and Inertia Friction Welding: Experimental and Microstructural Characterization
- 27 September 2022
- journal article
- research article
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 145 (2)
Abstract
Flow forming and inertia friction welding (IFW) have been widely used as manufacturing processes that produce high-value engineering components. Combining these two advanced processes facilitates the fabrication of near-net shape components leading to optimized designs. This study introduces the joining of flow-formed seamless tubes of MLX®19 maraging steel using the IFW process to fabricate a near-net shape component used in landing gears and missile parts. The as-received material was initially provided ≈30% reduction in thickness from the flow forming trials and then welded at four varying weld energies while maintaining constant friction and forge pressures. The mechanical behavior of the weldments was characterized, and the optimized weld parameters were determined. The concomitant microstructural evolution of the optimized weld was also examined to comprehend the underlying deformation mechanisms. The weld strength, axial shortening, and width of dynamic recrystallization (DRX) displayed an increasing trend with an increase in the weld energy. The weld-zone (WZ) and thermomechanical affected zone (TMAZ) showed the presence of martensite, whereas in the HAZ presence of intermetallic precipitates and reverted austenite was confirmed along with tempered martensite. Based on microstructural evidence, it was concluded that the peak temperature attained in the WZ was above Ac3, whereas in the TMAZ it was in-between Ac1 and Ac3. The evolution of crystallographic texture implied that WZ was subjected to pure shear deformation during the welding whereas the TMAZ experienced a combined shear and compressive deformation.Keywords
Funding Information
- University of Strathclyde (CORE-1438)
This publication has 31 references indexed in Scilit:
- Transformation and Deformation Texture Study in Friction Stir Processed API X80 Pipeline SteelMetallurgical and Materials Transactions A, 2012
- Texture development in friction stir weldsScience and Technology of Welding and Joining, 2011
- Influence of post-weld heat treatments on microstructure and mechanical properties of gas tungsten arc maraging steel weldmentsMaterials Science and Technology, 2010
- Near net shape technology: An innovative opportunity for the automotive industryRobotics and Computer-Integrated Manufacturing, 2008
- Microstructural evolution during friction stir-processing of pure ironActa Materialia, 2008
- Effect of rotational speed on the interface properties of friction-welded AISI 304L to 4340 steelMaterials & Design (1980-2015), 2007
- Mechanical and metallurgical properties of friction-welded TiC particulate reinforced Ti–6Al–4VComposites Science and Technology, 2004
- Effect of heat treatment on microstructures of flow formed C-250 maraging steelMaterials Science and Technology, 2003
- Heterogeneity of crystallographic texture in friction stir welds of aluminumMetallurgical and Materials Transactions A, 2001
- Microstructural changes during welding and subsequent heat treatment of 18Ni (250-grade) maraging steelMaterials Science and Engineering: A, 2000