A method for the synthesis of binary TiO2 / SiO2 xerogel (5-40% TiO2) using a TiO2 / NaCl composite and hydroxylated SiO2 xerogel has been developed. The SiO2 / NaCl composite was obtained by adding salt to the product of the interaction of tetrabutoxytitane and hydrogen peroxide, followed by drying and calcination at 700 °C. The composite and silica xerogel were crushed and mixed. The formation of the binary material occurred during the washing of the mixture from the salt template. The initial components and the synthesized binary xerogel were studied by X-ray phase analysis, electron microscopy, and IR spectroscopy. The initial components have the following characteristics: TiO2 - crystallite size 10-30 nm, composition - 97% anatase and 3% rutile; SiO2 - particle size 15-500 nm, 100% amorphous phase. According to X-ray phase analysis, the TiO2 / SiO2 xerogel is a mixture of the initial components - crystalline titanium dioxide and amorphous silica. Electron microscopy revealed that the binary material is an aggregate of spherical oxide particles. The particles in the unit are not packed tightly. The structure of the unit is loose. With an increase in the titanium content in the material, micrographs show an increase in the coating density of the silica matrix surface with TiO2 crystallites. IR spectroscopy revealed the presence of a developed hydroxyl-hydrate coating in both TiO2 particles and silica matrix particles. The analysis of IR spectroscopy data allows us to conclude about the interaction between TiO2 particles and amorphous silica particles with the formation of a Si-O-Ti bond. The specific catalytic activity of TiO2 particles in the model process of hydrogen peroxide decomposition increases with an increase in the proportion of silica in the material.