Yuliya Vladimirovna Mikushina
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yuliya Vladimirovna Mikushina has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
A. B. Shishmakov
Postovsky Institute of Organic Synthesis, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia
22 shared publicationsO. V. Koryakova
Postovsky Institute of Organic Synthesis, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia
15 shared publicationsL. A. Petrov
I. Ya. Postovsky Institute of Organic Synthesis, Ural Branch of the Russian Academy of Sciences, Ekaterinburg, Russian Federation
11 shared publications- Elena Germanovna Kovaleva
Institute of Chemical Technology, Ural Federal University, Ekaterinburg, Russia
3 shared publications L. S. Molochnikov
3 shared publicationsM. S. Valova
Russian Academy of Sciences
3 shared publications
Latest Publications
- 1 February 2026
- Published by Pleiades Publishing Ltd in Theoretical Foundations of Chemical Engineering
- Vol. 60 (1) , 50-56
Synthesis of the TiO2/SiO2 Binary Xerogel Using the TiO2/NaCl Composite
A method for the synthesis of the TiO2/SiO2 binary xerogel (5–40% TiO2) using a TiO2/NaCl composite and hydroxylated SiO2 xerogel was developed. The TiO2/NaCl composite was obtained by adding salt to the product of the interaction of tetrabutoxytitanium and hydrogen peroxide followed by drying and calcination at 700°C. Analysis of IR spectroscopy data indicates interaction between TiO2 particles and particles of amorphous silica with the formation of a Si–O–Ti bond. The specific catalytic activity of TiO2 particles in the model process of hydrogen peroxide decomposition increases with an increasing fraction of silica in the material.
- 1 February 2026
- Published by Pleiades Publishing Ltd in Theoretical Foundations of Chemical Engineering
- Vol. 60 (1) , 50-56
Synthesis of the TiO2/SiO2 Binary Xerogel Using the TiO2/NaCl Composite
A method for the synthesis of the TiO2/SiO2 binary xerogel (5–40% TiO2) using a TiO2/NaCl composite and hydroxylated SiO2 xerogel was developed. The TiO2/NaCl composite was obtained by adding salt to the product of the interaction of tetrabutoxytitanium and hydrogen peroxide followed by drying and calcination at 700°C. Analysis of IR spectroscopy data indicates interaction between TiO2 particles and particles of amorphous silica with the formation of a Si–O–Ti bond. The specific catalytic activity of TiO2 particles in the model process of hydrogen peroxide decomposition increases with an increasing fraction of silica in the material.
- 1 April 2025
- Published by Pleiades Publishing Ltd in Russian Journal of Inorganic Chemistry
- Vol. 70 (4) , 616-623
Synthesis of TiO2 Nanopowders by Thermal Decomposition of a Titanium Peroxo Complex in the Presence of an NaCl Template
Disperse titanium dioxide was prepared by the thermal decomposition (700°C) of a titanium peroxo complex in the presence of a sodium chloride template at various precursor/template ratios. Comparative analysis was carried out against titanium dioxide prepared in the absence of templates. The prepared titanium dioxide was represented by two crystalline phases: anatase and rutile. The synthesis of nanosized TiO2 in the presence of sodium chloride yielded an aggregate of spherical TiO2 grains with an average diameter of 19 nm. The major crystalline phase was anatase (>90%). The increasing NaCl content in the initial mixture brought about an increase in the proportion of the Ssp.
- 1 April 2025
- Published by Pleiades Publishing Ltd in Russian Journal of Inorganic Chemistry
- Vol. 70 (4) , 616-623
Synthesis of TiO2 Nanopowders by Thermal Decomposition of a Titanium Peroxo Complex in the Presence of an NaCl Template
Disperse titanium dioxide was prepared by the thermal decomposition (700°C) of a titanium peroxo complex in the presence of a sodium chloride template at various precursor/template ratios. Comparative analysis was carried out against titanium dioxide prepared in the absence of templates. The prepared titanium dioxide was represented by two crystalline phases: anatase and rutile. The synthesis of nanosized TiO2 in the presence of sodium chloride yielded an aggregate of spherical TiO2 grains with an average diameter of 19 nm. The major crystalline phase was anatase (>90%). The increasing NaCl content in the initial mixture brought about an increase in the proportion of the Ssp.
- 1 February 2025
- Published by Springer Nature in Russian Chemical Bulletin
- Vol. 74 (2) , 529-533
Formation of long-prismatic TiO2 nanocrystals upon the calcination of a mixture of titanium peroxo complex and sodium chloride
- 1 February 2025
- Published by Springer Nature in Russian Chemical Bulletin
- Vol. 74 (2) , 529-533
Formation of long-prismatic TiO2 nanocrystals upon the calcination of a mixture of titanium peroxo complex and sodium chloride
- 1 January 2025
- Published by Science & Technology in Chemical Engineering
- Vol. 26 (11)
SYNTHESIS OF BINARY TIO2 / SIO2 XEROGEL USING TIO2 / NACL COMPOSITE
A method for the synthesis of binary TiO2 / SiO2 xerogel (5-40% TiO2) using a TiO2 / NaCl composite and hydroxylated SiO2 xerogel has been developed. The SiO2 / NaCl composite was obtained by adding salt to the product of the interaction of tetrabutoxytitane and hydrogen peroxide, followed by drying and calcination at 700 °C. The composite and silica xerogel were crushed and mixed. The formation of the binary material occurred during the washing of the mixture from the salt template. The initial components and the synthesized binary xerogel were studied by X-ray phase analysis, electron microscopy, and IR spectroscopy. The initial components have the following characteristics: TiO2 - crystallite size 10-30 nm, composition - 97% anatase and 3% rutile; SiO2 - particle size 15-500 nm, 100% amorphous phase. According to X-ray phase analysis, the TiO2 / SiO2 xerogel is a mixture of the initial components - crystalline titanium dioxide and amorphous silica. Electron microscopy revealed that the binary material is an aggregate of spherical oxide particles. The particles in the unit are not packed tightly. The structure of the unit is loose. With an increase in the titanium content in the material, micrographs show an increase in the coating density of the silica matrix surface with TiO2 crystallites. IR spectroscopy revealed the presence of a developed hydroxyl-hydrate coating in both TiO2 particles and silica matrix particles. The analysis of IR spectroscopy data allows us to conclude about the interaction between TiO2 particles and amorphous silica particles with the formation of a Si-O-Ti bond. The specific catalytic activity of TiO2 particles in the model process of hydrogen peroxide decomposition increases with an increase in the proportion of silica in the material.
- 1 January 2025
- Published by Science & Technology in Chemical Engineering
- Vol. 26 (11)
SYNTHESIS OF BINARY TIO2 / SIO2 XEROGEL USING TIO2 / NACL COMPOSITE
A method for the synthesis of binary TiO2 / SiO2 xerogel (5-40% TiO2) using a TiO2 / NaCl composite and hydroxylated SiO2 xerogel has been developed. The SiO2 / NaCl composite was obtained by adding salt to the product of the interaction of tetrabutoxytitane and hydrogen peroxide, followed by drying and calcination at 700 °C. The composite and silica xerogel were crushed and mixed. The formation of the binary material occurred during the washing of the mixture from the salt template. The initial components and the synthesized binary xerogel were studied by X-ray phase analysis, electron microscopy, and IR spectroscopy. The initial components have the following characteristics: TiO2 - crystallite size 10-30 nm, composition - 97% anatase and 3% rutile; SiO2 - particle size 15-500 nm, 100% amorphous phase. According to X-ray phase analysis, the TiO2 / SiO2 xerogel is a mixture of the initial components - crystalline titanium dioxide and amorphous silica. Electron microscopy revealed that the binary material is an aggregate of spherical oxide particles. The particles in the unit are not packed tightly. The structure of the unit is loose. With an increase in the titanium content in the material, micrographs show an increase in the coating density of the silica matrix surface with TiO2 crystallites. IR spectroscopy revealed the presence of a developed hydroxyl-hydrate coating in both TiO2 particles and silica matrix particles. The analysis of IR spectroscopy data allows us to conclude about the interaction between TiO2 particles and amorphous silica particles with the formation of a Si-O-Ti bond. The specific catalytic activity of TiO2 particles in the model process of hydrogen peroxide decomposition increases with an increase in the proportion of silica in the material.
- 1 July 2024
- Published by Pleiades Publishing Ltd in Inorganic Materials
- Vol. 60 (7) , 871-879
Controlling the Size of CeO2 Nanoparticles in Ce(NO3)3 Thermolysis
We have developed a technique for the synthesis of CeO2 nanopowder with the use of a powdered cellulose (PC)/Ce(NO3)3/NaCl composite. It comprises the following steps: preparation of PC/Ce(NO3)3/NaCl, burnout of the cellulose template (600°C), and removal of the sodium chloride via washing with water. Using IR and UV spectroscopies, X-ray diffraction, and electron microscopy, we have assessed the effect of sodium chloride concentration in the parent composite on the physicochemical properties of the resulting CeO2. The material prepared from PC/Ce(NO3)3/NaCl consisted of two types of CeO2 particles: particles 15–40 nm in diameter (forming irregularly shaped structures) and particles 1.5–2.2 nm in diameter. These latter formed the surface of spherical aggregates ranging in size from 30 to 200 nm. Increasing the amount of NaCl in PC/Ce(NO3)3/NaCl has been shown to cause an increase in the fraction of spherical aggregates in the nanopowders. The size of the spherical aggregates and that of the particles aggregated on their surface are essentially independent of the amount of sodium chloride in the parent composite. The nanopowder prepared without sodium chloride (PC/Ce(NO3)3) consisted of only particles of the former type. In the material prepared from PC/Ce(NO3)3/NaCl, cerium dioxide was present in the form of cerianite and amorphous phase. A tendency has been found for the content of the amorphous phase in CeO2 to increase as the amount of sodium chloride in PC/Ce(NO3)3/NaCl increases. If the parent composite was free of NaCl, no amorphous phase was formed. No Ce(III) has been detected in the material prepared from PC/Ce(NO3)3/NaCl, as distinct from that prepared from PC/Ce(NO3)3. Increasing the amount of sodium chloride in PC/Ce(NO3)3/NaCl increases the thickness of the hydroxyl–hydrate shell in the nanopowder. The carbon-containing impurities identified in the nanopowders have been shown to be the result of sorption from the ambient atmosphere. The catalytic activity of CeO2 nanopowder for hydrogen peroxide decomposition as a model reaction rises in proportion to the increase in the amount of sodium chloride in the parent composite.
- 1 July 2024
- Published by Pleiades Publishing Ltd in Inorganic Materials
- Vol. 60 (7) , 871-879
Controlling the Size of CeO2 Nanoparticles in Ce(NO3)3 Thermolysis
We have developed a technique for the synthesis of CeO2 nanopowder with the use of a powdered cellulose (PC)/Ce(NO3)3/NaCl composite. It comprises the following steps: preparation of PC/Ce(NO3)3/NaCl, burnout of the cellulose template (600°C), and removal of the sodium chloride via washing with water. Using IR and UV spectroscopies, X-ray diffraction, and electron microscopy, we have assessed the effect of sodium chloride concentration in the parent composite on the physicochemical properties of the resulting CeO2. The material prepared from PC/Ce(NO3)3/NaCl consisted of two types of CeO2 particles: particles 15–40 nm in diameter (forming irregularly shaped structures) and particles 1.5–2.2 nm in diameter. These latter formed the surface of spherical aggregates ranging in size from 30 to 200 nm. Increasing the amount of NaCl in PC/Ce(NO3)3/NaCl has been shown to cause an increase in the fraction of spherical aggregates in the nanopowders. The size of the spherical aggregates and that of the particles aggregated on their surface are essentially independent of the amount of sodium chloride in the parent composite. The nanopowder prepared without sodium chloride (PC/Ce(NO3)3) consisted of only particles of the former type. In the material prepared from PC/Ce(NO3)3/NaCl, cerium dioxide was present in the form of cerianite and amorphous phase. A tendency has been found for the content of the amorphous phase in CeO2 to increase as the amount of sodium chloride in PC/Ce(NO3)3/NaCl increases. If the parent composite was free of NaCl, no amorphous phase was formed. No Ce(III) has been detected in the material prepared from PC/Ce(NO3)3/NaCl, as distinct from that prepared from PC/Ce(NO3)3. Increasing the amount of sodium chloride in PC/Ce(NO3)3/NaCl increases the thickness of the hydroxyl–hydrate shell in the nanopowder. The carbon-containing impurities identified in the nanopowders have been shown to be the result of sorption from the ambient atmosphere. The catalytic activity of CeO2 nanopowder for hydrogen peroxide decomposition as a model reaction rises in proportion to the increase in the amount of sodium chloride in the parent composite.
- 1 October 2023
- Published by Pleiades Publishing Ltd in Theoretical Foundations of Chemical Engineering
- Vol. 57 (5) , 985-990
Synthesis of Pd(0)/C by Pyrolysis of the Cellulose–Saccharose–Palladium Nitrate Powder Composite
Pyrolysis of cellulose powder granules impregnated with an aqueous solution of saccharose and palladium nitrate gave granular Pd/C carbons with 1–9 wt % metal. It was shown by X-ray diffraction analysis and electronic microscopy that palladium is present in the carbon matrix in the form of Pd(0) nanoparticles with sizes of 10–30 nm in the main fraction (~95%). Palladium nanoparticles are localized inside the saccharose carbonizate layer and on its surface. An IR spectral study showed that pyrolysis of the cellulose–saccharose powder composite in the presence of palladium nitrate leads to the appearance of ester groups in the carbonizate. An increase in the palladium nitrate content in the cellulose powder leads to lower yields of the carbonizate and larger metal nanoparticles in carbon. The specific catalytic activity of nanoparticles in the model decomposition reaction of hydrogen peroxide was found to be the same for all palladium-containing carbons.
- 1 October 2023
- Published by Pleiades Publishing Ltd in Theoretical Foundations of Chemical Engineering
- Vol. 57 (5) , 985-990
Synthesis of Pd(0)/C by Pyrolysis of the Cellulose–Saccharose–Palladium Nitrate Powder Composite
Pyrolysis of cellulose powder granules impregnated with an aqueous solution of saccharose and palladium nitrate gave granular Pd/C carbons with 1–9 wt % metal. It was shown by X-ray diffraction analysis and electronic microscopy that palladium is present in the carbon matrix in the form of Pd(0) nanoparticles with sizes of 10–30 nm in the main fraction (~95%). Palladium nanoparticles are localized inside the saccharose carbonizate layer and on its surface. An IR spectral study showed that pyrolysis of the cellulose–saccharose powder composite in the presence of palladium nitrate leads to the appearance of ester groups in the carbonizate. An increase in the palladium nitrate content in the cellulose powder leads to lower yields of the carbonizate and larger metal nanoparticles in carbon. The specific catalytic activity of nanoparticles in the model decomposition reaction of hydrogen peroxide was found to be the same for all palladium-containing carbons.
- 1 July 2023
- Published by The Russian Academy of Sciences in Žurnal neorganičeskoj himii
- Vol. 68 (7) , 867-876
Synthesis of CeO2 and CeO2/C Using Powdered Cellulose and Powdered Cellulose–Sucrose as a Template
CeO2 nanooxide has been synthesized from cerium(III) nitrate using powdered cellulose (PC) and its mixture with sucrose as templates. The removal of templates from composites (PC–Ce(NO3)3 and PC–sucrose–Ce(NO3)3) has been carried out in two ways: via direct burning-out of PC (PC–sucrose) in an air flow and via burning-out of the carbonizate after template pyrolysis. Using UV and IR spectroscopy, X-ray powder diffraction (XRD), and electron microscopy, the influence of the template composition and the method of its removal on the physicochemical characteristics of CeO2 nanoparticles has been studied. A carbon–oxide material CeO2/C has been synthesized by pyrolysis of PC–Ce(NO3)3 and PC–sucrose–Ce(NO3)3 composites. It has been established that the pyrolysis of PC–Ce(NO3)3 and PC–sucrose–Ce(NO3)3 leads to the formation, in the carbonizate, of CeO2 (cerianite) nanoparticles with sizes of 3–4 and 1–2.5 nm, respectively. The average diameter of nanoparticles (according to XRD data) is 3.8 and 2.3 nm. CeO2/C synthesized from the PC–sucrose–Ce(NO3)3 composite contains cerium(III) oxide. All CeO2 nanoparticles in the carbon matrix have a hydroxyl–hydrate cover. The burning of the organic or carbon matrix of the composites leads, regardless of the template used and synthesis conditions, to the formation of CeO2 (cerianite) nanoparticles with the same average diameter of 25 ± 1 nm (according to XRD data), containing an admixture of the Ce(III) phase and having a hydroxyl–hydrate cover. Carbon is present in the material in trace amounts (≤0.15 wt %). The size scatter of CeO2 nanoparticles produced by burning out PC from the PC–Ce(NO3)3 composite is 15–30 nm. In those cases when the organic component from PC–sucrose–Ce(NO3)3 is subjected to burning or the pyrolysis stage of both composites is included in the synthesis process, the appearance of a fraction of larger CeO2 particles (50–60 nm) is observed. The correctness of the obtained data has been confirmed in the course of the model process of hydrogen peroxide decomposition.
- 1 July 2023
- Published by The Russian Academy of Sciences in Žurnal neorganičeskoj himii
- Vol. 68 (7) , 867-876
Synthesis of CeO2 and CeO2/C Using Powdered Cellulose and Powdered Cellulose–Sucrose as a Template
CeO2 nanooxide has been synthesized from cerium(III) nitrate using powdered cellulose (PC) and its mixture with sucrose as templates. The removal of templates from composites (PC–Ce(NO3)3 and PC–sucrose–Ce(NO3)3) has been carried out in two ways: via direct burning-out of PC (PC–sucrose) in an air flow and via burning-out of the carbonizate after template pyrolysis. Using UV and IR spectroscopy, X-ray powder diffraction (XRD), and electron microscopy, the influence of the template composition and the method of its removal on the physicochemical characteristics of CeO2 nanoparticles has been studied. A carbon–oxide material CeO2/C has been synthesized by pyrolysis of PC–Ce(NO3)3 and PC–sucrose–Ce(NO3)3 composites. It has been established that the pyrolysis of PC–Ce(NO3)3 and PC–sucrose–Ce(NO3)3 leads to the formation, in the carbonizate, of CeO2 (cerianite) nanoparticles with sizes of 3–4 and 1–2.5 nm, respectively. The average diameter of nanoparticles (according to XRD data) is 3.8 and 2.3 nm. CeO2/C synthesized from the PC–sucrose–Ce(NO3)3 composite contains cerium(III) oxide. All CeO2 nanoparticles in the carbon matrix have a hydroxyl–hydrate cover. The burning of the organic or carbon matrix of the composites leads, regardless of the template used and synthesis conditions, to the formation of CeO2 (cerianite) nanoparticles with the same average diameter of 25 ± 1 nm (according to XRD data), containing an admixture of the Ce(III) phase and having a hydroxyl–hydrate cover. Carbon is present in the material in trace amounts (≤0.15 wt %). The size scatter of CeO2 nanoparticles produced by burning out PC from the PC–Ce(NO3)3 composite is 15–30 nm. In those cases when the organic component from PC–sucrose–Ce(NO3)3 is subjected to burning or the pyrolysis stage of both composites is included in the synthesis process, the appearance of a fraction of larger CeO2 particles (50–60 nm) is observed. The correctness of the obtained data has been confirmed in the course of the model process of hydrogen peroxide decomposition.
- 1 July 2023
- Published by Pleiades Publishing Ltd in Russian Journal of Inorganic Chemistry
- Vol. 68 (7) , 795-803
Synthesis of CeO2 and CeO2/C Using Powdered Cellulose and Powdered Cellulose–Sucrose as a Template
CeO2 nanooxide has been synthesized from cerium(III) nitrate using powdered cellulose (PC) and its mixture with sucrose as templates. The removal of templates from composites (PC–Ce(NO3)3 and PC–sucrose–Ce(NO3)3) has been carried out in two ways: via direct burning-out of PC (PC–sucrose) in an air flow and via burning-out of the carbonizate after template pyrolysis. Using UV and IR spectroscopy, X-ray powder diffraction (XRD), and electron microscopy, the influence of the template composition and the method of its removal on the physicochemical characteristics of CeO2 nanoparticles has been studied. A carbon–oxide material CeO2/C has been synthesized by pyrolysis of PC–Ce(NO3)3 and PC–sucrose–Ce(NO3)3 composites. It has been established that the pyrolysis of PC–Ce(NO3)3 and PC–sucrose–Ce(NO3)3 leads to the formation, in the carbonizate, of CeO2 (cerianite) nanoparticles with sizes of 3–4 and 1–2.5 nm, respectively. The average diameter of nanoparticles (according to XRD data) is 3.8 and 2.3 nm. CeO2/C synthesized from the PC–sucrose–Ce(NO3)3 composite contains cerium(III) oxide. All CeO2 nanoparticles in the carbon matrix have a hydroxyl–hydrate cover. The burning of the organic or carbon matrix of the composites leads, regardless of the template used and synthesis conditions, to the formation of CeO2 (cerianite) nanoparticles with the same average diameter of 25 ± 1 nm (according to XRD data), containing an admixture of the Ce(III) phase and having a hydroxyl–hydrate cover. Carbon is present in the material in trace amounts (≤0.15 wt %). The size scatter of CeO2 nanoparticles produced by burning out PC from the PC–Ce(NO3)3 composite is 15–30 nm. In those cases when the organic component from PC–sucrose–Ce(NO3)3 is subjected to burning or the pyrolysis stage of both composites is included in the synthesis process, the appearance of a fraction of larger CeO2 particles (50–60 nm) is observed. The correctness of the obtained data has been confirmed in the course of the model process of hydrogen peroxide decomposition.
- 1 July 2023
- Published by Pleiades Publishing Ltd in Russian Journal of Inorganic Chemistry
- Vol. 68 (7) , 795-803
Synthesis of CeO2 and CeO2/C Using Powdered Cellulose and Powdered Cellulose–Sucrose as a Template
CeO2 nanooxide has been synthesized from cerium(III) nitrate using powdered cellulose (PC) and its mixture with sucrose as templates. The removal of templates from composites (PC–Ce(NO3)3 and PC–sucrose–Ce(NO3)3) has been carried out in two ways: via direct burning-out of PC (PC–sucrose) in an air flow and via burning-out of the carbonizate after template pyrolysis. Using UV and IR spectroscopy, X-ray powder diffraction (XRD), and electron microscopy, the influence of the template composition and the method of its removal on the physicochemical characteristics of CeO2 nanoparticles has been studied. A carbon–oxide material CeO2/C has been synthesized by pyrolysis of PC–Ce(NO3)3 and PC–sucrose–Ce(NO3)3 composites. It has been established that the pyrolysis of PC–Ce(NO3)3 and PC–sucrose–Ce(NO3)3 leads to the formation, in the carbonizate, of CeO2 (cerianite) nanoparticles with sizes of 3–4 and 1–2.5 nm, respectively. The average diameter of nanoparticles (according to XRD data) is 3.8 and 2.3 nm. CeO2/C synthesized from the PC–sucrose–Ce(NO3)3 composite contains cerium(III) oxide. All CeO2 nanoparticles in the carbon matrix have a hydroxyl–hydrate cover. The burning of the organic or carbon matrix of the composites leads, regardless of the template used and synthesis conditions, to the formation of CeO2 (cerianite) nanoparticles with the same average diameter of 25 ± 1 nm (according to XRD data), containing an admixture of the Ce(III) phase and having a hydroxyl–hydrate cover. Carbon is present in the material in trace amounts (≤0.15 wt %). The size scatter of CeO2 nanoparticles produced by burning out PC from the PC–Ce(NO3)3 composite is 15–30 nm. In those cases when the organic component from PC–sucrose–Ce(NO3)3 is subjected to burning or the pyrolysis stage of both composites is included in the synthesis process, the appearance of a fraction of larger CeO2 particles (50–60 nm) is observed. The correctness of the obtained data has been confirmed in the course of the model process of hydrogen peroxide decomposition.
- Open Access
- 15 December 2022
- Published by Altai State University in Chemistry of plant raw material
- No. 4,p. 321-331
STUDY OF THE PROCESS OF CARBONIZATION OF POWDERED CELLULOSE GRANULES IMPREGNATED WITH AgNO3 AND Pd(NO3)2
A comparative study of the process of carbonization of powdered cellulose granules and powdered cellulose granules impregnated with silver and palladium nitrate salts was carried out. The process was carried out in the temperature range 200–600 °С. The influence of the presence of metals on the course of carbonization of powdered cellulose and the features of the reduction of silver and palladium during carbonization were studied by IR spectroscopy and X-ray phase analysis. It has been established that the presence of silver in powdered cellulose does not affect the yield of carbonized material. The presence of palladium in powdered cellulose leads to the fact that the yield of carbonizate in the temperature range of 300–600 °C is reduced relative to the yield of carbonizate simply from powdered cellulose. It has been established by IR spectroscopy that impregnation with salts and subsequent drying at 90 °C of powdered cellulose granules leads to the appearance of carboxyl groups in it, which are not observed in unimpregnated powdered cellulose. With an increase in the heat treatment temperature to 200 °C, the amount of these groups in the silver-containing material increases sharply, while in the palladium-containing material it remains unchanged. A significant increase in the number of C=O groups in the palladium-containing material begins at 300 °C. The increased relative content of C=O groups in the metal-containing material is also preserved in the temperature range of 300–500 °C. The presence of metals in powdered cellulose at pyrolysis temperatures of 300–500 °C leads to a decrease in the content of C=C groups in the carbon matrix relative to methylene (methine) groups. At 600 °C, the carbon matrix of all coals is completely carbonized. X-ray diffraction analysis recorded the appearance of metallic silver and palladium in metal-containing coals at a temperature of 300 °C As the carbonization temperature increases, the content of crystalline Ag(0) and Pd(0) in coals increases. No other forms of silver and palladium are found in the temperature range of 300–600 °С. Testing of metal-containing coals in a model reaction of hydrogen peroxide decomposition showed: in silver-containing carbonizates, the availability of silver particles for H2O2 increases due to an increase in the pyrolysis temperature; in Pd/C, an additional factor that increases the availability of metal particles is the interaction of palladium with carbonizate during pyrolysis.
- 15 December 2022
- Published by Altai State University in Chemistry of plant raw material
- No. 4,p. 321-331
Open AccessSTUDY OF THE PROCESS OF CARBONIZATION OF POWDERED CELLULOSE GRANULES IMPREGNATED WITH AgNO3 AND Pd(NO3)2
A comparative study of the process of carbonization of powdered cellulose granules and powdered cellulose granules impregnated with silver and palladium nitrate salts was carried out. The process was carried out in the temperature range 200–600 °С. The influence of the presence of metals on the course of carbonization of powdered cellulose and the features of the reduction of silver and palladium during carbonization were studied by IR spectroscopy and X-ray phase analysis. It has been established that the presence of silver in powdered cellulose does not affect the yield of carbonized material. The presence of palladium in powdered cellulose leads to the fact that the yield of carbonizate in the temperature range of 300–600 °C is reduced relative to the yield of carbonizate simply from powdered cellulose. It has been established by IR spectroscopy that impregnation with salts and subsequent drying at 90 °C of powdered cellulose granules leads to the appearance of carboxyl groups in it, which are not observed in unimpregnated powdered cellulose. With an increase in the heat treatment temperature to 200 °C, the amount of these groups in the silver-containing material increases sharply, while in the palladium-containing material it remains unchanged. A significant increase in the number of C=O groups in the palladium-containing material begins at 300 °C. The increased relative content of C=O groups in the metal-containing material is also preserved in the temperature range of 300–500 °C. The presence of metals in powdered cellulose at pyrolysis temperatures of 300–500 °C leads to a decrease in the content of C=C groups in the carbon matrix relative to methylene (methine) groups. At 600 °C, the carbon matrix of all coals is completely carbonized. X-ray diffraction analysis recorded the appearance of metallic silver and palladium in metal-containing coals at a temperature of 300 °C As the carbonization temperature increases, the content of crystalline Ag(0) and Pd(0) in coals increases. No other forms of silver and palladium are found in the temperature range of 300–600 °С. Testing of metal-containing coals in a model reaction of hydrogen peroxide decomposition showed: in silver-containing carbonizates, the availability of silver particles for H2O2 increases due to an increase in the pyrolysis temperature; in Pd/C, an additional factor that increases the availability of metal particles is the interaction of palladium with carbonizate during pyrolysis.
- Open Access
Acidic and Electrosurface Properties of Binary TiO2-SiO2 Xerogels Using EPR of pH-Sensitive Nitroxides
The binary xerogels TiO2-SiO2 are widely used as catalysts and their carriers in organic synthesis. Characterization and adjustment of the electrostatic properties of the surface and the local acidity inside the pores, are necessary for the further development of TiO2-SiO2 xerogels applications. This research investigates acid–base equilibria in the pores, and the surface electrostatic potential (SEP) of binary TiO2-SiO2 xerogels, by the EPR of stable pH-sensitive nitroxide radicals. These radicals are small enough to penetrate directly into the pores, and to be adsorbed onto the surface of the material under study. This makes it possible to obtain valuable information on the acidic and electrosurface properties of the studied system. The highest negative surface electrical charge associated with surface electrical potential (SEP) was equal to −196 ± 6 mV. It was induced by the surface of the sample with a 7% TiO2 content. The local acidity inside the pores of this sample was found to be higher, by approximately 1.49 pH units, as compared to that in the external bulk solution.
Open AccessAcidic and Electrosurface Properties of Binary TiO2-SiO2 Xerogels Using EPR of pH-Sensitive Nitroxides
The binary xerogels TiO2-SiO2 are widely used as catalysts and their carriers in organic synthesis. Characterization and adjustment of the electrostatic properties of the surface and the local acidity inside the pores, are necessary for the further development of TiO2-SiO2 xerogels applications. This research investigates acid–base equilibria in the pores, and the surface electrostatic potential (SEP) of binary TiO2-SiO2 xerogels, by the EPR of stable pH-sensitive nitroxide radicals. These radicals are small enough to penetrate directly into the pores, and to be adsorbed onto the surface of the material under study. This makes it possible to obtain valuable information on the acidic and electrosurface properties of the studied system. The highest negative surface electrical charge associated with surface electrical potential (SEP) was equal to −196 ± 6 mV. It was induced by the surface of the sample with a 7% TiO2 content. The local acidity inside the pores of this sample was found to be higher, by approximately 1.49 pH units, as compared to that in the external bulk solution.