Inspection of Mine Wire Rope Using Magnetic Aggregation Bridge Based on Magnetic Resistance Sensor Array
- 26 March 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 69 (10) , 7437-7448
Abstract
Early detection of damage to wire ropes used in coal mine winching and traction systems is important for avoiding production delays and for the safety of personnel entering the mine. This study proposes a new magnetic aggregation bridge detection method utilizing a magnetic resistance sensor array, which addresses the shortcomings of present methods for testing the integrity of wire ropes used in coal mining operations. First, the structure and types of damage incurred by such ropes are analyzed. The detection principle of the proposed method and the optimization of magnetic induction strength regions are then described. The selection of three types of magnetic sensitivity detection elements are compared and analyzed. On this basis, the magnetic aggregation method for inspecting wire rope, based on magnetic resistance sensor array, is studied in detail, including the detection effect of including or omitting a magnetic aggregation device. Different structures and sizes of magnetic aggregation devices are examined for their performance effect, showing measures to improve the effect of magnetization detection and selection methods for the magnetic resistance sensor.A detection method using a magnetic resistance sensor array combination matched with the magnetic field focusing model was discussedin detail. Finally, the proposed method is verified experimentally. The results show that the prototype sensor based on the proposed method can clearly detect multiple types of damage to wire rope, achieving a maximum signal-to-noise ratio of 60 dB and a considerable detection effect, compared to the conventional magnetic flux leakage defect detection sensor.Keywords
Funding Information
- National Natural Science Foundation of China (51774293)
- Yue Qi Young Scholar Project
- Yue Qi Distinguished Scholar Project of China University of Mining and Technology
- Central Business Funds of Colleges (2020YQJD06, 2020YJSJD05)
This publication has 10 references indexed in Scilit:
- MFL-Based Local Damage Diagnosis and SVM-Based Damage Type Classification for Wire Rope NDEMaterials, 2019
- A Sensor for Broken Wire Detection of Steel Wire Ropes Based on the Magnetic Concentrating PrincipleSensors, 2019
- Discrimination method of wire rope fault signal based on Holzer sensor for multi array weak magnetic detectionCluster Computing, 2018
- Magnetic Flux Leakage Sensing and Artificial Neural Network Pattern Recognition-Based Automated Damage Detection and Quantification for Wire Rope Non-Destructive EvaluationSensors, 2018
- Theory and Numerical Analysis of Extreme Learning Machine and Its Application for Different Degrees of Defect Recognition of Hoisting Wire RopeShock and Vibration, 2018
- Online nondestructive testing for fine steel wire rope in electromagnetic interference environmentNDT & E International, 2017
- A magnetic method of wire-rupture detection in steel cablesRussian Electrical Engineering, 2017
- Research on magnetic excitation model of magnetic flux leakage for coal mine hoisting wire ropeAdvances in Mechanical Engineering, 2015
- A New Method of Defects Identification for Wire Rope Based on Three-Dimensional Magnetic Flux LeakageJournal of Physics: Conference Series, 2006
- A transducer made up of fluxgate sensors for testing wire rope defectsIEEE Transactions on Instrumentation and Measurement, 2002