Study of the Relationship Between Microstructure, Phase Composition and Strength Characteristics in Composite Ceramics Based on ZrO2-Al2O3 System
Open Access
- 29 September 2025
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (10) , 519
Abstract
ZrO2-MgO-Al2O3 ceramics, despite a long history of research, still attract the attention of researchers due to the high potential of their applications as refractories and matrices for metal ceramics. A unique composition combining high strength and temperature stability is particularly in demand. In this paper, a comprehensive study of ceramics of the composition (90−x)·ZrO2-10·MgO-x·Al2O3 (x = 10–80 wt.%) obtained by solid-phase sintering with preliminary annealing is carried out. Preliminary annealing was used for the possible formation of metastable phases with outstanding mechanical properties. Using the X-ray diffraction method, it was found that most of the samples consist of monoclinic zirconium oxide, magnesium–aluminum spinel, and corundum phases. The exception is the sample with x = 10 wt.%, in which the main phase was a cubic modification of zirconium oxide. By formation this type of ZrO2 polymorph in the composition hardness and flexural strength significantly increased from 400 to 1380 and 50 to 210 MPa, respectively. The total porosity of ceramics under study lies in the range 6–28%. Using the scanning electron microscopy method, it was found that the phase composition significantly affects the morphology of the microstructure of the sintered bodies. Thus, for sintered ceramics with a high corundum content, the microstructure is characterized by high porosity and a large grain size. For the first time, by applying preliminary annealing, a new type of ternary ceramic ZrO2-MgO-Al2O3 was sintered with potentially outstanding mechanical properties. The presence of a stabilized zirconium oxide phase, stresses in the crystal lattice of the matrix phase, and the formation of cracks in the microstructure are the main factors influencing shrinkage, porosity, microhardness, and biaxial flexural strength.Keywords
Funding Information
- Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan (BR21882390)
This publication has 44 references indexed in Scilit:
- Zircon, Zirconium, Zirconia - Similar Names, Different Materials2022
- The controlled preparation and stability mechanism of partially stabilized zirconia by microwave intensificationCeramics International, 2020
- Preparation and thermal shock behavior of nanoscale MgAl2O4 spinel-toughened MgO-based refractory aggregatesCeramics International, 2019
- Synthesis and characterization of a MgO-MgAl 2 O 4 -ZrO 2 composite with a continuous network microstructureCeramics International, 2017
- Crystal orientation dependence of the stress-induced martensitic transformation in zirconia-based shape memory ceramicsActa Materialia, 2016
- Sintering Trajectories: Description on How Density, Surface Area, and Grain Size ChangeJOM, 2016
- Effect of MgO additions on the phase stability and degradation ability in ZrO2–Al2O3 composite systemsCeramics International, 2015
- The comparison of mechanical behavior of MgO–MgAl2O4 with MgO–ZrO2 and MgO–MgAl2O4–ZrSiO4 composite refractoriesCeramics International, 2012
- The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratioClinical Oral Investigations, 2012
- Zirconia-toughened alumina (ZTA) ceramicsJournal of Materials Science, 1989