Microstructure-based modeling of IMC layer thickness effect on tensile behavior of Cu/Al clad strip
Open Access
- 1 January 2020
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (1) , 016589
Abstract
A microstructure-based model is proposed for quantitative estimation of tensile mechanical property of Cu/Al clad strips. In the proposed model, the fracture criterion for matrix Cu and Al, interface intermetallic compounds (IMCs) and interface between matrix and IMCs are established and incorporated. The effect of IMCs thickness and strip thickness on tensile behavior of Cu/Al strip was studied quantitatively using the proposed model. And a new dimensionless parameter w/t is also proposed to be a control index for tensile mechanical property of Cu/Al clad strips. And a critical value of w/t which is defined to be 0.025 in this study is found to be important in controlling mechanical property of Cu/Al strip with a thickness less than 0.5 mm. The potential application of the proposed model and parameter is also discussed for annealing process optimization and mechanical property control of 0.12 mm thick Cu/Al clad strips.Keywords
Funding Information
- the State Key Laboratory of Rolling and Automation, Northeastern University (No.2019RALKFKT011)
- Fundamental Research Funds for the Central Universities (No. N170704015)
- National Natural Science Foundation of China (No. 50971039)
This publication has 22 references indexed in Scilit:
- Effect of bonding interface on delamination behavior of drawn Cu/Al bar clad materialTransactions of Nonferrous Metals Society of China, 2012
- Three dimensional (3D) microstructure-based modeling of interfacial decohesion in particle reinforced metal matrix compositesMaterials Science and Engineering: A, 2012
- Failure surface of epoxy-modified fiber-reinforced composites under transverse tension and out-of-plane shearInternational Journal of Solids and Structures, 2009
- Effect of Annealing on the Interfacial Structure of Aluminum-Copper JointsMATERIALS TRANSACTIONS, 2007
- Influence of Interfacial Structure Development on the Fracture Mechanism and Bond Strength of Aluminum/Copper Bimetal PlateMATERIALS TRANSACTIONS, 2006
- Effects of interfacial debonding on the rate-dependent response of metal matrix compositesActa Materialia, 2005
- Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealingJournal of Alloys and Compounds, 2005
- Effects of Cu/Al intermetallic compound (IMC) on copper wire and aluminum pad bondabilityIEEE Transactions on Components and Packaging Technologies, 2003
- Intermetallic Formation in the Aluminum–Copper SystemSurface Review and Letters, 2003
- Growth rate of intermetallic compounds in Al/Cu bimetal produced by cold roll welding processJournal of Alloys and Compounds, 2001