Fuan Hua
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fuan Hua has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Guo Yuan
State Key Laboratory of Digital Steel, Northeastern University
3 shared publications - Jianping Li
State Key Laboratory of Digital Steel, Northeastern University, Shenyang 110819, China
3 shared publications - Xiaolin Han
School of Information and Electrical Engineering, Hebei University of Engineering, Handan, China
3 shared publications - Cheng-Gang Li
The State Key Laboratory of Rolling and Automation, Northeastern University, No. 11, Lane 3, Wenhua Road, Heping District, Shenyang 110819, China
2 shared publications - Guang-Lin Jia
The State Key Laboratory of Rolling and Automation, Northeastern University, No. 11, Lane 3, Wenhua Road, Heping District, Shenyang 110819, China
2 shared publications Guodong Wang
State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang, China
2 shared publications
Latest Publications
- Open Access
- 4 March 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-14
Eliminating surface transverse cracks in the novel vertical bending continuous casting of pure aluminum 1070 thin slabs
To achieve high-efficiency continuous production of aluminum, vertical bending continuous casting equipment has been designed. However, the formation of surface transverse cracks during casting presents a significant challenge, particularly when producing thin slabs of pure aluminum 1070. This study investigates the high-temperature tensile properties of pure aluminum 1070 thin slabs and conducts numerical simulations of the temperature and stress fields in the vertical bending continuous casting process. The results indicate that a thick solidified shell at the mold outlet, combined with sufficient high-temperature strength and plasticity at the center of the wide surface (1170 mm from the arc section inlet), is essential for resisting thermal and mechanical stresses, thus preventing the formation of surface transverse cracks. The solidified shell thickness at the mold outlet is optimized to no less than 10.8 mm. Additionally, the temperature at the center of the wide surface at an arc length of 1170 mm from the inlet of the arc section and at the outlet of the arc section are effectively controlled to a maximum of 414.0 °C and 365.1 °C, respectively. These adjustments effectively prevent surface transverse cracks in the produced pure aluminum 1070 thin slabs. The novelty of this work lies in the precise regulation of both the temperature and stress fields, offering a solution to the surface crack issue. This study makes significant contributions to optimizing casting parameters for the novel process and enhancing the overall efficiency of aluminum alloy production.
- 4 March 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-14
Open AccessEliminating surface transverse cracks in the novel vertical bending continuous casting of pure aluminum 1070 thin slabs
To achieve high-efficiency continuous production of aluminum, vertical bending continuous casting equipment has been designed. However, the formation of surface transverse cracks during casting presents a significant challenge, particularly when producing thin slabs of pure aluminum 1070. This study investigates the high-temperature tensile properties of pure aluminum 1070 thin slabs and conducts numerical simulations of the temperature and stress fields in the vertical bending continuous casting process. The results indicate that a thick solidified shell at the mold outlet, combined with sufficient high-temperature strength and plasticity at the center of the wide surface (1170 mm from the arc section inlet), is essential for resisting thermal and mechanical stresses, thus preventing the formation of surface transverse cracks. The solidified shell thickness at the mold outlet is optimized to no less than 10.8 mm. Additionally, the temperature at the center of the wide surface at an arc length of 1170 mm from the inlet of the arc section and at the outlet of the arc section are effectively controlled to a maximum of 414.0 °C and 365.1 °C, respectively. These adjustments effectively prevent surface transverse cracks in the produced pure aluminum 1070 thin slabs. The novelty of this work lies in the precise regulation of both the temperature and stress fields, offering a solution to the surface crack issue. This study makes significant contributions to optimizing casting parameters for the novel process and enhancing the overall efficiency of aluminum alloy production.
- Open Access
Macro-/Microstructural Features and Temperature Distribution of Pure Aluminum 1070 in Novel Thin Slab Continuous Casting Process
This study introduces a novel vertical bending continuous casting technology for producing thin slabs of pure aluminum and aluminum alloys, offering significant advancements over traditional vertical casting methods. The newly designed equipment and optimized process parameters enable the continuous casting of pure aluminum 1070 at a speed of 1.2 m/min, surpassing the casting speed of conventional direct-chill casting. Comprehensive investigations of the macrostructure and microstructure of the cast pure aluminum 1070 reveal a refined equiaxed crystal structure with an average grain size of 98 μm, significantly smaller than that obtained through conventional casting processes. This refinement in grain size is expected to enhance the material’s mechanical properties and processing capabilities. Additionally, simulations of the temperature distribution and solidification structure provide insights into the formation of a “U”-shaped sump and liquidus isotherms, which are crucial for understanding the solidification dynamics of the material. The refined grain structure and increased casting speed demonstrate substantial potential for advancing aluminum alloy production, especially in applications requiring superior performance and more efficient manufacturing processes.
Open AccessMacro-/Microstructural Features and Temperature Distribution of Pure Aluminum 1070 in Novel Thin Slab Continuous Casting Process
This study introduces a novel vertical bending continuous casting technology for producing thin slabs of pure aluminum and aluminum alloys, offering significant advancements over traditional vertical casting methods. The newly designed equipment and optimized process parameters enable the continuous casting of pure aluminum 1070 at a speed of 1.2 m/min, surpassing the casting speed of conventional direct-chill casting. Comprehensive investigations of the macrostructure and microstructure of the cast pure aluminum 1070 reveal a refined equiaxed crystal structure with an average grain size of 98 μm, significantly smaller than that obtained through conventional casting processes. This refinement in grain size is expected to enhance the material’s mechanical properties and processing capabilities. Additionally, simulations of the temperature distribution and solidification structure provide insights into the formation of a “U”-shaped sump and liquidus isotherms, which are crucial for understanding the solidification dynamics of the material. The refined grain structure and increased casting speed demonstrate substantial potential for advancing aluminum alloy production, especially in applications requiring superior performance and more efficient manufacturing processes.
- Open Access
- 4 November 2023
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 27, 5059-5069
Mechanical properties and corrosion behavior of trace Cr-containing Al–9Si–1.2Cu–0.5Mg casting alloy
- 4 November 2023
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 27, 5059-5069
Open AccessMechanical properties and corrosion behavior of trace Cr-containing Al–9Si–1.2Cu–0.5Mg casting alloy
- Open Access
Researches on the Macro- and Micro-Structures and Properties of the Vertical Bending Continuous Casted AA6063 Thin Slabs and Their As-Rolled Sheets
A 6063 aluminum alloy thin slab with a cross-section of 260 × 40 mm2 was prepared by a vertical bending continuous casting (VC) process. The effects of homogenization, hot rolling and subsequent heat treatments on the microstructure and properties of the as-cast slabs and as-rolled sheets were investigated by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), field emission electron probe (EPMA), macro- and micro-structure observation and tensile tests. The results show that the as-cast structure of AA 6063 was dominated by fine and uniform equiaxed grains. After homogenization, all Mg2Si phases dissolved back, and the Fe-containing intermetallic phases changed from acicular β-Al5FeSi phase to spherical α-Al8Fe2Si phase. Homogenizing heat treatment before hot rolling can improve the mechanical properties of the alloy. However, in the case of direct rolling without homogenization, the alloy still has good mechanical properties; the strength and plasticity are comparable to that obtained through traditional direct chill (DC) casting, homogenizing and extruding processes, indicating that the VC process has the potential to realize continuous casting and rolling.
Open AccessResearches on the Macro- and Micro-Structures and Properties of the Vertical Bending Continuous Casted AA6063 Thin Slabs and Their As-Rolled Sheets
A 6063 aluminum alloy thin slab with a cross-section of 260 × 40 mm2 was prepared by a vertical bending continuous casting (VC) process. The effects of homogenization, hot rolling and subsequent heat treatments on the microstructure and properties of the as-cast slabs and as-rolled sheets were investigated by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), field emission electron probe (EPMA), macro- and micro-structure observation and tensile tests. The results show that the as-cast structure of AA 6063 was dominated by fine and uniform equiaxed grains. After homogenization, all Mg2Si phases dissolved back, and the Fe-containing intermetallic phases changed from acicular β-Al5FeSi phase to spherical α-Al8Fe2Si phase. Homogenizing heat treatment before hot rolling can improve the mechanical properties of the alloy. However, in the case of direct rolling without homogenization, the alloy still has good mechanical properties; the strength and plasticity are comparable to that obtained through traditional direct chill (DC) casting, homogenizing and extruding processes, indicating that the VC process has the potential to realize continuous casting and rolling.
- 12 April 2022
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
- Vol. 49 (8) , 741-748
Research and development of a pilot continuous annealing and MgO coating line for grain-oriented silicon steel
To investigate the processes of continuous annealing and MgO coating of grain-oriented silicon steel (GO), a pilot-scale line was developed, which could realize functions such as cleaning, heating, decarburization, reduction, nitriding, and MgO coating in a coil-to-coil manner. A significant feature of the pilot line is the integrated furnace consisting of six furnace units and the in-between separating devices, which work collaboratively to adjust the lengths, and to separate the annealing atmospheres and temperatures of the different process sections. A series of test runs and experiments was carried out on the line. The results showed that the pilot line had the characteristics of flexible process, accurate process parameters control and reliable atmosphere separation. The results of decarburization, reduction, nitriding, and coating met the requirements of GO. The pilot line provided an excellent platform for the experimental study of the processes of continuous annealing and MgO coating of GO.
- 12 April 2022
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
- Vol. 49 (8) , 741-748
Research and development of a pilot continuous annealing and MgO coating line for grain-oriented silicon steel
To investigate the processes of continuous annealing and MgO coating of grain-oriented silicon steel (GO), a pilot-scale line was developed, which could realize functions such as cleaning, heating, decarburization, reduction, nitriding, and MgO coating in a coil-to-coil manner. A significant feature of the pilot line is the integrated furnace consisting of six furnace units and the in-between separating devices, which work collaboratively to adjust the lengths, and to separate the annealing atmospheres and temperatures of the different process sections. A series of test runs and experiments was carried out on the line. The results showed that the pilot line had the characteristics of flexible process, accurate process parameters control and reliable atmosphere separation. The results of decarburization, reduction, nitriding, and coating met the requirements of GO. The pilot line provided an excellent platform for the experimental study of the processes of continuous annealing and MgO coating of GO.
- Open Access
- 1 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 28904-28916
A Low Discrepancy Heuristic Evolution ELM and Ground Effect Theory-Based Serial Hybrid Soft Sensor Model of Floating Height in Air Cushion Furnace
In air cushion furnace, the floating height is a key process parameter which greatly affects the quality and production efficiency of high quality metal strips. However, the floating height is hard to be collected in the complex and abominable industry environment. Furthermore, due to the flow field characteristics, some important process variables are difficult to accurately calculate by traditional mechanism modeling methods. In order to accurately predict the floating height, firstly, a low discrepancy heuristic evolution ELM and ground effect theory based serial hybrid soft sensor model is proposed, which constituted by a mechanism model and two data driven models. Secondly, based on the force equilibrium equation and ground effect theory, the mechanism model is constructed, which describes the relationship between the floating height and the process variables including the jet impact angle. Thirdly, a low discrepancy heuristic evolution ELM is proposed as the data driven model to predict the jet impinging angle. In the data driven model, the novel dual mutation strategies collaboration differential evolution is proposed to guarantee the low discrepancy and physical applicability of data driven model. The effectiveness of the proposed method was validated on the self-developed air cushion experiment platform and got desirable experimental results. The research lays an important foundation for the successful implementation of monitoring and control of the strip floating process.
- 1 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 28904-28916
Open AccessA Low Discrepancy Heuristic Evolution ELM and Ground Effect Theory-Based Serial Hybrid Soft Sensor Model of Floating Height in Air Cushion Furnace
In air cushion furnace, the floating height is a key process parameter which greatly affects the quality and production efficiency of high quality metal strips. However, the floating height is hard to be collected in the complex and abominable industry environment. Furthermore, due to the flow field characteristics, some important process variables are difficult to accurately calculate by traditional mechanism modeling methods. In order to accurately predict the floating height, firstly, a low discrepancy heuristic evolution ELM and ground effect theory based serial hybrid soft sensor model is proposed, which constituted by a mechanism model and two data driven models. Secondly, based on the force equilibrium equation and ground effect theory, the mechanism model is constructed, which describes the relationship between the floating height and the process variables including the jet impact angle. Thirdly, a low discrepancy heuristic evolution ELM is proposed as the data driven model to predict the jet impinging angle. In the data driven model, the novel dual mutation strategies collaboration differential evolution is proposed to guarantee the low discrepancy and physical applicability of data driven model. The effectiveness of the proposed method was validated on the self-developed air cushion experiment platform and got desirable experimental results. The research lays an important foundation for the successful implementation of monitoring and control of the strip floating process.
- Open Access
- 12 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 194685-194699
Hard-Division and Multi-Model Based Floating Height Prediction for Air Cushion Furnace With Hybrid Nozzles
The strip floating height is a key factor affecting production efficiency and quality of the air cushion furnace. At present, the air cushion furnace with hybrid nozzles is the most typical heating and drying equipment. In order to predict the floating height of the strip in this equipment, a hard-division and multi-model based floating height prediction method is proposed. In hard division method, the process is divided into several stable and vibration stages. On the one hand, time interval based novel density clustering algorithm is proposed so as to avoid the wrong division caused by noise at hard division stage. On the other hand, covariance matrices based local density is presented to better capture dynamic characteristics of the process. In the multi-model stage, a hybrid prediction model under stable state and XGBoost-based model under vibration state are established to predict the strip floating height. The hybrid prediction model is composed of mechanism model and data driven model. The mechanism model is proposed by combining the force balance equation and inviscid theory which can predict the major information of the floating height and the data driven model compensates the error of the mechanism model. A mount of experiments have been carried out on the existing air cushion experimental platform and show desirable prediction effect.
- 12 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 194685-194699
Open AccessHard-Division and Multi-Model Based Floating Height Prediction for Air Cushion Furnace With Hybrid Nozzles
The strip floating height is a key factor affecting production efficiency and quality of the air cushion furnace. At present, the air cushion furnace with hybrid nozzles is the most typical heating and drying equipment. In order to predict the floating height of the strip in this equipment, a hard-division and multi-model based floating height prediction method is proposed. In hard division method, the process is divided into several stable and vibration stages. On the one hand, time interval based novel density clustering algorithm is proposed so as to avoid the wrong division caused by noise at hard division stage. On the other hand, covariance matrices based local density is presented to better capture dynamic characteristics of the process. In the multi-model stage, a hybrid prediction model under stable state and XGBoost-based model under vibration state are established to predict the strip floating height. The hybrid prediction model is composed of mechanism model and data driven model. The mechanism model is proposed by combining the force balance equation and inviscid theory which can predict the major information of the floating height and the data driven model compensates the error of the mechanism model. A mount of experiments have been carried out on the existing air cushion experimental platform and show desirable prediction effect.
- Open Access
Multi-Model- and Soft-Transition-Based Height Soft Sensor for an Air Cushion Furnace
The floating height of the strip in an air cushion furnace is a key parameter for the quality and efficiency of production. However, the high temperature and high pressure of the working environment prevents the floating height from being directly measured. Furthermore, the strip has multiple floating states in the whole operation process. It is thus difficult to employ a single model to accurately describe the floating height in different states. This paper presents a multi-model soft sensor to estimate the height based on state identification and the soft transition. First, floating states were divided using a partition method that combined adaptive k-nearest neighbors and principal component analysis theories. Based on the identified results, a hybrid model for the stable state, involving a double-random forest model for the vibration state and a soft-transition model, was created to predict the strip floating height. In the hybrid model for the stable state, a mechanistic model combined thick jet theory and the equilibrium equation of force to cope with the lower floating height. In addition, a novel soft-transition model based on data gravitation that further reflects the intrinsic process characteristic was developed for the transition state. The effectiveness of the proposed approach was validated using a self-developed air cushion furnace experimental platform. This study has important value for the process prediction and control of air cushion furnaces.
Open AccessMulti-Model- and Soft-Transition-Based Height Soft Sensor for an Air Cushion Furnace
The floating height of the strip in an air cushion furnace is a key parameter for the quality and efficiency of production. However, the high temperature and high pressure of the working environment prevents the floating height from being directly measured. Furthermore, the strip has multiple floating states in the whole operation process. It is thus difficult to employ a single model to accurately describe the floating height in different states. This paper presents a multi-model soft sensor to estimate the height based on state identification and the soft transition. First, floating states were divided using a partition method that combined adaptive k-nearest neighbors and principal component analysis theories. Based on the identified results, a hybrid model for the stable state, involving a double-random forest model for the vibration state and a soft-transition model, was created to predict the strip floating height. In the hybrid model for the stable state, a mechanistic model combined thick jet theory and the equilibrium equation of force to cope with the lower floating height. In addition, a novel soft-transition model based on data gravitation that further reflects the intrinsic process characteristic was developed for the transition state. The effectiveness of the proposed approach was validated using a self-developed air cushion furnace experimental platform. This study has important value for the process prediction and control of air cushion furnaces.
- Open Access
- 1 January 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (1) , 016589
Microstructure-based modeling of IMC layer thickness effect on tensile behavior of Cu/Al clad strip
A microstructure-based model is proposed for quantitative estimation of tensile mechanical property of Cu/Al clad strips. In the proposed model, the fracture criterion for matrix Cu and Al, interface intermetallic compounds (IMCs) and interface between matrix and IMCs are established and incorporated. The effect of IMCs thickness and strip thickness on tensile behavior of Cu/Al strip was studied quantitatively using the proposed model. And a new dimensionless parameter w/t is also proposed to be a control index for tensile mechanical property of Cu/Al clad strips. And a critical value of w/t which is defined to be 0.025 in this study is found to be important in controlling mechanical property of Cu/Al strip with a thickness less than 0.5 mm. The potential application of the proposed model and parameter is also discussed for annealing process optimization and mechanical property control of 0.12 mm thick Cu/Al clad strips.
- 1 January 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (1) , 016589
Open AccessMicrostructure-based modeling of IMC layer thickness effect on tensile behavior of Cu/Al clad strip
A microstructure-based model is proposed for quantitative estimation of tensile mechanical property of Cu/Al clad strips. In the proposed model, the fracture criterion for matrix Cu and Al, interface intermetallic compounds (IMCs) and interface between matrix and IMCs are established and incorporated. The effect of IMCs thickness and strip thickness on tensile behavior of Cu/Al strip was studied quantitatively using the proposed model. And a new dimensionless parameter w/t is also proposed to be a control index for tensile mechanical property of Cu/Al clad strips. And a critical value of w/t which is defined to be 0.025 in this study is found to be important in controlling mechanical property of Cu/Al strip with a thickness less than 0.5 mm. The potential application of the proposed model and parameter is also discussed for annealing process optimization and mechanical property control of 0.12 mm thick Cu/Al clad strips.
- 26 June 2019
- Published by Springer Nature in Metals and Materials International
- Vol. 26 (3) , 333-345
Inter-diffusion Based Analytical Model for Growth Kinetics of IMC Layers at Roll Bonded Cu/Al Interface During Annealing Process
- 26 June 2019
- Published by Springer Nature in Metals and Materials International
- Vol. 26 (3) , 333-345
Inter-diffusion Based Analytical Model for Growth Kinetics of IMC Layers at Roll Bonded Cu/Al Interface During Annealing Process