Automated Calibration Robotic System Capable of Producing Versatile Force Combinations for Multiaxis Force/Torque Sensors
- 13 February 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 20 (5) , 7335-7344
Abstract
In this study, we describe the development of a novel calibration robotic system, which is capable of automatically generating various combinations of a six-axis force/torque (F/T) that measures the maximum force information at a point. We proposed a new principle for generating a six-axis F/T by using three vertical forces and three horizontal forces based on a kinematic model. The mechanism of the proposed system was designed and manufactured compactly using a pulley-driven mechanism and a wire-driven mechanism. Consequently, versatile combinations of the F/T were generated by using the force/position control of six motors in the system, and their performance was validated by comparing the data with that of a commercial six-axis F/T sensor. Results showed an error of less than 1.6%. In addition, performance validation was further conducted using artificial intelligence techniques to obtain accurate data with an error below 0.025%.Keywords
Funding Information
- Ministry of Trade, Industry and Energy (1415187105)
This publication has 34 references indexed in Scilit:
- A Polyetheretherketone Six-Axis Force/Torque SensorIEEE Access, 2019
- Six-Axis Column-Type Force and Moment Sensor for Robotic ApplicationsIEEE Sensors Journal, 2018
- Multi-Axial Force/Torque Sensor Calibration Method Based on Deep-LearningIEEE Sensors Journal, 2018
- Design and optimization of a novel six-axis force/torque sensor for space robotMeasurement, 2015
- Design and Calibration of a Six-axis Force/torque Sensor with Large Measurement Range Used for the Space ManipulatorProcedia Engineering, 2015
- A review of tactile sensing technologies with applications in biomedical engineeringSensors and Actuators A: Physical, 2012
- Design and fabrication of a six-dimensional wrist force/torque sensor based on E-type membranes compared to cross beamsMeasurement, 2010
- Measurement method of six-axis load sharing based on the Stewart platformMeasurement, 2010
- State-of-the-Art in Force and Tactile Sensing for Minimally Invasive SurgeryIEEE Sensors Journal, 2008
- Neural-network-based 3D force/torque sensor calibration for robot applicationsEngineering Applications of Artificial Intelligence, 1997