Jinhak Hwang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jinhak Hwang has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Uikyum Kim
Department of Mechanical Engineering, Ajou University, Suwon, South Korea
4 shared publications - Dawoon Jung
Department of Mechanical Engineering, Ajou University, Suwon, South Korea
2 shared publications - Seran Lee
Department of Mechanical Engineering, Ajou University, Suwon, South Korea
2 shared publications - Cheol Hoon Park
Advanced Robotics Research Center, Korea Institute of Machinery & Materials (KIMM), Daejeon, Republic of Korea
1 shared publication - Doohoe Lee
Department of Mechanical Engineering, Ajou University, Suwon, South Korea
1 shared publication - Heeyeon Jeong
School of Mechanical Engineering, Sungkyunkwan University (SKKU), Suwon, South Korea
1 shared publication
Latest Publications
- Open Access
Force-Sensor-Integrated Buckle for Wearable Robots
Wearable robots require compact sensing interfaces to monitor the forces transmitted through attachment straps. This study aims to combine strap fastening and force measurement in a lightweight buckle, enabling the magnitude and direction of strap loading to be monitored at the attachment interface. The proposed buckle incorporates two capacitive sensing cells and a flexure structure that converts applied loads into measurable capacitance changes. Their combined responses provide dual-axis force sensing within the buckle body. The complete device measures and weighs , including its sensing and signal-processing electronics. Its force and angle ranges are 0– and , respectively. The average capacitance sensitivity was , and the force linearity error was of full scale of output (FSO). Force root-mean-square error (RMSE) was of FSO without initial preload and – of FSO with approximately preload in the respective tests. The validation angle RMSE was of FSO. Force hysteresis and repeatability were and of FSO, respectively. The force and angle FSO values were and . The estimated bandwidth was . The proposed design provides a compact sensing interface for strap-based wearable robots.Open AccessForce-Sensor-Integrated Buckle for Wearable Robots
Wearable robots require compact sensing interfaces to monitor the forces transmitted through attachment straps. This study aims to combine strap fastening and force measurement in a lightweight buckle, enabling the magnitude and direction of strap loading to be monitored at the attachment interface. The proposed buckle incorporates two capacitive sensing cells and a flexure structure that converts applied loads into measurable capacitance changes. Their combined responses provide dual-axis force sensing within the buckle body. The complete device measures and weighs , including its sensing and signal-processing electronics. Its force and angle ranges are 0– and , respectively. The average capacitance sensitivity was , and the force linearity error was of full scale of output (FSO). Force root-mean-square error (RMSE) was of FSO without initial preload and – of FSO with approximately preload in the respective tests. The validation angle RMSE was of FSO. Force hysteresis and repeatability were and of FSO, respectively. The force and angle FSO values were and . The estimated bandwidth was . The proposed design provides a compact sensing interface for strap-based wearable robots. - 24 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (6) , 6951-6961
Ultracompact Multiaxis Force Sensor Based on Sensitivity Amplification Mechanism for High-Sensitivity and Capacity Measurement
In recent years, increasing research focus has been devoted to force sensing for delicate tasks in robotic applications. This has led to increased requirements for force sensors with enhanced sensitivity, broader measurement ranges, and more compact designs. In this study, a compact three-axis force sensor based on an enhanced sensitivity amplification mechanism is introduced for high sensitivity and capacity measurements. The mechanism has a C-shaped comb structure resembling the Wi-Fi symbol and the electrodes are spaced 120$\,^{\circ }$ apart for three-axis force detection. The proposed sensor consists of three main components: a top plate, a sensing part, and a bottom part. The stiffness of the deformed part of the top plate is determined by analyzing the corresponding design parameters. The Wi-Fi-shaped electrode structures are located in the sensing part, and the capacitance information of the electrodes is measured. The proposed sensor has a high resolution (2.72 mN/digit), a wide measurement range (100 N), and compactness (thickness: 6.6 mm) and offers the advantages of a low cost and ease of manufacture. The sensor performance was verified through experiments conducted in an environment combined with an actual robot manipulator.
- 24 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (6) , 6951-6961
Ultracompact Multiaxis Force Sensor Based on Sensitivity Amplification Mechanism for High-Sensitivity and Capacity Measurement
In recent years, increasing research focus has been devoted to force sensing for delicate tasks in robotic applications. This has led to increased requirements for force sensors with enhanced sensitivity, broader measurement ranges, and more compact designs. In this study, a compact three-axis force sensor based on an enhanced sensitivity amplification mechanism is introduced for high sensitivity and capacity measurements. The mechanism has a C-shaped comb structure resembling the Wi-Fi symbol and the electrodes are spaced 120$\,^{\circ }$ apart for three-axis force detection. The proposed sensor consists of three main components: a top plate, a sensing part, and a bottom part. The stiffness of the deformed part of the top plate is determined by analyzing the corresponding design parameters. The Wi-Fi-shaped electrode structures are located in the sensing part, and the capacitance information of the electrodes is measured. The proposed sensor has a high resolution (2.72 mN/digit), a wide measurement range (100 N), and compactness (thickness: 6.6 mm) and offers the advantages of a low cost and ease of manufacture. The sensor performance was verified through experiments conducted in an environment combined with an actual robot manipulator.
- 26 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-10
Intuitive Six-Degree-of-Freedom Human Interface Device for Human–Robot Interaction
An intuitive communication method between humans and robots is required to realize efficient human-robot interaction (HRI). In this paper, an intuitive human interface device for robotic applications is proposed for realizing HRI. The sensing principle and design of the device are mainly described. The device can detect six-degree-of-freedom displacements with six-axis force/torque (F/T). The device mainly consists of a handle, sensing part, and base frame. The sensing part was designed with the capacitance sensing principle using an eccentric arrangement of electrodes. For ease of use, the part was designed to mechanically limit deformation by applying a blocking mechanism. All the components of the device were built-in. The device was manufactured in the form of a joystick that could be easily operated by a human. Consequently, a calibration process was conducted using deep learning to assess the performance of the developed human interface device (HID). Furthermore, using the developed HID, tasks were performed for direct interaction with a collaborative robot manipulator.
- 26 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-10
Intuitive Six-Degree-of-Freedom Human Interface Device for Human–Robot Interaction
An intuitive communication method between humans and robots is required to realize efficient human-robot interaction (HRI). In this paper, an intuitive human interface device for robotic applications is proposed for realizing HRI. The sensing principle and design of the device are mainly described. The device can detect six-degree-of-freedom displacements with six-axis force/torque (F/T). The device mainly consists of a handle, sensing part, and base frame. The sensing part was designed with the capacitance sensing principle using an eccentric arrangement of electrodes. For ease of use, the part was designed to mechanically limit deformation by applying a blocking mechanism. All the components of the device were built-in. The device was manufactured in the form of a joystick that could be easily operated by a human. Consequently, a calibration process was conducted using deep learning to assess the performance of the developed human interface device (HID). Furthermore, using the developed HID, tasks were performed for direct interaction with a collaborative robot manipulator.
- 13 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 20 (5) , 7335-7344
Automated Calibration Robotic System Capable of Producing Versatile Force Combinations for Multiaxis Force/Torque Sensors
In this study, we describe the development of a novel calibration robotic system, which is capable of automatically generating various combinations of a six-axis force/torque (F/T) that measures the maximum force information at a point. We proposed a new principle for generating a six-axis F/T by using three vertical forces and three horizontal forces based on a kinematic model. The mechanism of the proposed system was designed and manufactured compactly using a pulley-driven mechanism and a wire-driven mechanism. Consequently, versatile combinations of the F/T were generated by using the force/position control of six motors in the system, and their performance was validated by comparing the data with that of a commercial six-axis F/T sensor. Results showed an error of less than 1.6%. In addition, performance validation was further conducted using artificial intelligence techniques to obtain accurate data with an error below 0.025%.
- 13 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 20 (5) , 7335-7344
Automated Calibration Robotic System Capable of Producing Versatile Force Combinations for Multiaxis Force/Torque Sensors
In this study, we describe the development of a novel calibration robotic system, which is capable of automatically generating various combinations of a six-axis force/torque (F/T) that measures the maximum force information at a point. We proposed a new principle for generating a six-axis F/T by using three vertical forces and three horizontal forces based on a kinematic model. The mechanism of the proposed system was designed and manufactured compactly using a pulley-driven mechanism and a wire-driven mechanism. Consequently, versatile combinations of the F/T were generated by using the force/position control of six motors in the system, and their performance was validated by comparing the data with that of a commercial six-axis F/T sensor. Results showed an error of less than 1.6%. In addition, performance validation was further conducted using artificial intelligence techniques to obtain accurate data with an error below 0.025%.