Effects of ultrasonic amplitude on sapphire ultrasonic vibration assisted chemical mechanical polishing by experimental and CFD method
Authors:
- 4 November 2021
- journal article
- research article
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 29 (28) , 7086-7103
Abstract
Sapphire possesses chemically inert and high hardness. Therefore, it is difficult to get idea material removal rate (MRR) and low surface roughness through chemical mechanical polishing (CMP). Ultrasonic vibration assisted chemical mechanical polishing (UV-CMP) can effectively increase the MRR and decrease the roughness of sapphire surface by combining ultrasonic with CMP. In this article, computational fluid dynamics was adopted to research the effects of ultrasonic amplitude on slurry behavior in UV-CMP. The distribution and variations of physical properties such as velocity, pressure, and air volume fraction were characterized at the microscopic level. The importance of cavitation in UV-CMP was discussed. The accuracy of numerical results was verified by the experiments of sapphire UV-CMP. The results show that the amplitude has a vital influence on the polishing effects. The ultrasonic vibration, f = 40 kHz and P = 60 W, can make the MRR and polished surface roughness Ra of sapphire reach 0.96 μm/h and 0.095 nm, respectively. It is much better than 0.66 μm/h and 0.261 nm of sapphire CMP.Keywords
Funding Information
- The National Natural Science Foundation of China (51865030)
This publication has 43 references indexed in Scilit:
- Effects of the ultrasonic flexural vibration on the interaction between the abrasive particles; pad and sapphire substrate during chemical mechanical polishing (CMP)Applied Surface Science, 2011
- Ultrasonic flexural vibration assisted chemical mechanical polishing for sapphire substrateApplied Surface Science, 2010
- Preparation, quality characterization, service performance evaluation and its modification of sapphire crystal for optical window and dome applicationMaterials & Design (1980-2015), 2010
- A 3D Numerical Study of the Polishing Behavior during an Oxide Chemical Mechanical Planarization ProcessKey Engineering Materials, 2004
- Modeling CMP Transport and Kinetics at the Pad Groove ScaleMRS Proceedings, 2004
- Pad porosity, compressibility and slurry delivery effects in chemical-mechanical planarization: modeling and experimentsThin Solid Films, 2000
- APPLICATIONS OF ULTRASOUND TO MATERIALS CHEMISTRYAnnual Review of Materials Science, 1999
- Contact Mechanics and Lubrication Hydrodynamics of Chemical Mechanical PolishingJournal of the Electrochemical Society, 1999
- InGaN-BASED LASER DIODESAnnual Review of Materials Science, 1998
- Modeling of chemical-mechanical polishing: a reviewIEEE Transactions on Semiconductor Manufacturing, 1995