Effects of nanoclay and phenolic resin in combination with DOPO derivative on flame retardancy, thermal and thermomechanical properties of epoxy resin
- 21 September 2026
- journal article
- research article
- Published by SAGE Publications in High Performance Polymers
- Vol. 38 (10) , 721-733
Abstract
Various flame-retardant epoxy (EP) composites were prepared in combination with phenolic resin (PF), DOPO derivative (DD) and nanoclay (NC). The flame-retardancy of epoxy composites was studied by LOI, UL-94 and cone calorimeter analyses. The EP‒DD 2.0 (2.0% phosphorus) and EP‒DD 2.0 ‒NC 2.0 (2.0% phosphorus and 2.0% NC) composites gave best V-0 rating without dripping and LOI values of 29.0–29.2%. In cone calorimeter analysis, the peak heat release rate and total heat release were decreased by 63.6 and 59.1% for EP‒DD 2.0 ‒NC 2.0 nanocomposite. The epoxy composites on heating exhibited higher char yield at the cost of volatile products as noted in thermogravimetric and cone calorimetry analyses. The DSC and DMA were carried to measure the glass transition temperature ( T g ). The results indicated a significant drop in T g from 213°C of EP to 146°C of EP-DD 2.0 -NC 2.0 , while an improvement in storage modulus was observed of the sample by decreasing the cross-link density as a result of plasticization effect of flame-retardant.Keywords
This publication has 29 references indexed in Scilit:
- Beyond flame retardancy: A P/N-containing heterocycle endows epoxy thermosets with fire safety, toughness and multifunctionalityChemical Engineering Journal, 2026
- Synthesis and flame‐retardant analysis of a novel P/N containing flame retardant on epoxy resin compositesFire and Materials, 2024
- Preparation of phosphorus‐containing phenolic resin and its application in epoxy resin as a curing agent and flame retardantPolymers for Advanced Technologies, 2018
- Phosphaphenanthrene‐containing borate ester as a latent hardener and flame retardant for epoxy resinPolymer International, 2015
- In situ chemical reduction and functionalization of graphene oxide for electrically conductive phenol formaldehyde compositesCarbon, 2014
- Preparation of phosphinated bisphenol from acid‐fragmentation of 1,1,1‐tris(4‐hydroxyphenyl)ethane and its application in high‐performance cyanate estersJournal of Polymer Science Part A: Polymer Chemistry, 2011
- Novel phenolic resins with improved mechanical and toughness propertiesJournal of Applied Polymer Science, 2011
- Mechanical properties of epoxy resin/hydroxyl‐terminated polyester blends: effect of two‐phase structurePolymer International, 2005
- Synthesis and characterization of phenolic resole resins for composite applicationsJournal of Applied Polymer Science, 1999
- Synthesis and thermal characterization of chemically modified phenolic resinsJournal of Applied Polymer Science, 1994