Jai Bhagwan Dahiya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jai Bhagwan Dahiya has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
Henning Bockhorn
Institute for Technical and Polymer Chemistry Karlsruhe Institute of Technology (KIT) 76128 Karlsruhe Germany
2 shared publicationsVishal Soni
Department of Chemistry Guru Jambheshwar University of Science & Technology Hisar India
2 shared publications- Dinesh1 shared publication
- Kanchan Rani
Department of Chemistry, Guru Jambheshwar University of Science & Technology, Hisar-125001, India
1 shared publication - Kismat Dhillon
Department of Chemistry, Guru Jambheshwar University of Science & Technology, Hisar-125001, India
1 shared publication - Krishan Kumar
Jawaharlal Nehru University
1 shared publication
Latest Publications
- Open Access
- 13 November 2026
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 38 (11) , 3021-3028
Effect of Crosslinking in Phosphorus-Nitrogen based Hydrogel on the Flammability of Cotton Fabric
To improve the flame retardancy of cotton fabrics for applications requiring enhanced fire safety, a phosphorus- and nitrogen-containing crosslinked hydrogel, poly(N-hydroxymethyl acrylamide)-bis[2-(methacryloyloxy)ethyl]phosphate (PNBP), was synthesized and evaluated as a flame-retardant coating. The hydrogel was characterized by FTIR spectroscopy, mass spectrometry and thermogravimetric analysis. Cotton fabrics were coated using the admicellar polymerization technique, with cetylpyridinium chloride as the cationic surfactant and 2,2'-azobis(2-methylpropionamidine) dihydrochloride as the initiator. The concentration of bis[2-(methacryloyloxy)ethyl]phosphate crosslinker was varied to investigate its effect on flame-retardant performance. The fabric treated with the formulation containing 50% crosslinker did not ignite under the specified auto-flammability test conditions and exhibited a limiting oxygen index (LOI) of 36.0%. The results showed an improvement in flame-retardant performance with increasing crosslinker content under the conditions investigated. Field-emission scanning electron microscopy (FESEM) was used to examine the surface morphology of the treated fabrics.
- 13 November 2026
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 38 (11) , 3021-3028
Open AccessEffect of Crosslinking in Phosphorus-Nitrogen based Hydrogel on the Flammability of Cotton Fabric
To improve the flame retardancy of cotton fabrics for applications requiring enhanced fire safety, a phosphorus- and nitrogen-containing crosslinked hydrogel, poly(N-hydroxymethyl acrylamide)-bis[2-(methacryloyloxy)ethyl]phosphate (PNBP), was synthesized and evaluated as a flame-retardant coating. The hydrogel was characterized by FTIR spectroscopy, mass spectrometry and thermogravimetric analysis. Cotton fabrics were coated using the admicellar polymerization technique, with cetylpyridinium chloride as the cationic surfactant and 2,2'-azobis(2-methylpropionamidine) dihydrochloride as the initiator. The concentration of bis[2-(methacryloyloxy)ethyl]phosphate crosslinker was varied to investigate its effect on flame-retardant performance. The fabric treated with the formulation containing 50% crosslinker did not ignite under the specified auto-flammability test conditions and exhibited a limiting oxygen index (LOI) of 36.0%. The results showed an improvement in flame-retardant performance with increasing crosslinker content under the conditions investigated. Field-emission scanning electron microscopy (FESEM) was used to examine the surface morphology of the treated fabrics.
- 21 September 2026
- Published by SAGE Publications in High Performance Polymers
Effects of nanoclay and phenolic resin in combination with DOPO derivative on flame retardancy, thermal and thermomechanical properties of epoxy resin
Various flame-retardant epoxy (EP) composites were prepared in combination with phenolic resin (PF), DOPO derivative (DD) and nanoclay (NC). The flame-retardancy of epoxy composites was studied by LOI, UL-94 and cone calorimeter analyses. The EP‒DD 2.0 (2.0% phosphorus) and EP‒DD 2.0 ‒NC 2.0 (2.0% phosphorus and 2.0% NC) composites gave best V-0 rating without dripping and LOI values of 29.0–29.2%. In cone calorimeter analysis, the peak heat release rate and total heat release were decreased by 63.6 and 59.1% for EP‒DD 2.0 ‒NC 2.0 nanocomposite. The epoxy composites on heating exhibited higher char yield at the cost of volatile products as noted in thermogravimetric and cone calorimetry analyses. The DSC and DMA were carried to measure the glass transition temperature ( T g ). The results indicated a significant drop in T g from 213°C of EP to 146°C of EP-DD 2.0 -NC 2.0 , while an improvement in storage modulus was observed of the sample by decreasing the cross-link density as a result of plasticization effect of flame-retardant.
- 21 September 2026
- Published by SAGE Publications in High Performance Polymers
Effects of nanoclay and phenolic resin in combination with DOPO derivative on flame retardancy, thermal and thermomechanical properties of epoxy resin
Various flame-retardant epoxy (EP) composites were prepared in combination with phenolic resin (PF), DOPO derivative (DD) and nanoclay (NC). The flame-retardancy of epoxy composites was studied by LOI, UL-94 and cone calorimeter analyses. The EP‒DD 2.0 (2.0% phosphorus) and EP‒DD 2.0 ‒NC 2.0 (2.0% phosphorus and 2.0% NC) composites gave best V-0 rating without dripping and LOI values of 29.0–29.2%. In cone calorimeter analysis, the peak heat release rate and total heat release were decreased by 63.6 and 59.1% for EP‒DD 2.0 ‒NC 2.0 nanocomposite. The epoxy composites on heating exhibited higher char yield at the cost of volatile products as noted in thermogravimetric and cone calorimetry analyses. The DSC and DMA were carried to measure the glass transition temperature ( T g ). The results indicated a significant drop in T g from 213°C of EP to 146°C of EP-DD 2.0 -NC 2.0 , while an improvement in storage modulus was observed of the sample by decreasing the cross-link density as a result of plasticization effect of flame-retardant.
- Open Access
- 31 December 2025
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 38 (1) , 67-74
Synthesis of Phosphoric Acid Ester-based Flame Retardants and their Application via Sol-Gel Process to Enhance Flame Retardancy of Cotton Fabric
In order to enhance the flame retardancy of cotton fabric and expand it use in regions with strict fire safety regulations, the phosphoric acid esters-based organic compounds such as diphosphoric acid ethyleneglycol ester (diPEG), triphosphoric acid glycerol ester (triPGE), and tetraphosphoric acid pentaerythritol ester (tetraPPE) were synthesized and characterized by 1H-NMR, 31P-NMR and HRMS. The cotton fabric was treated with these compounds and aminopropyltriethoxysilane (APTES) a sol-gel precursor by using sol-gel process. FTIR spectrum of treated fabric shows additional peaks at 1240 (P=O), 1044 (Si-O-Si) and 794 cm-1 (Si-O), which shows the presence of flame retardant coating on fabric. Thermogravimetric analysis was employed to conduct the change in path of thermal degradation of treated cotton fabric. The behavior of flame retardancy was assessed through auto flammability and limiting oxygen index examinations. The treated cotton fabric exhibits outstanding flame retardant properties during combustion and are extinguished promptly once the ignition is eliminated. The limiting oxygen index value of the cotton fabric after treatment with tetraPPE/APTES flame retardant reached 38.3%, which is sufficiently above the flame retardant value of about 27%. Morphological structures of fabric were also investigated using FESEM.
- 31 December 2025
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 38 (1) , 67-74
Open AccessSynthesis of Phosphoric Acid Ester-based Flame Retardants and their Application via Sol-Gel Process to Enhance Flame Retardancy of Cotton Fabric
In order to enhance the flame retardancy of cotton fabric and expand it use in regions with strict fire safety regulations, the phosphoric acid esters-based organic compounds such as diphosphoric acid ethyleneglycol ester (diPEG), triphosphoric acid glycerol ester (triPGE), and tetraphosphoric acid pentaerythritol ester (tetraPPE) were synthesized and characterized by 1H-NMR, 31P-NMR and HRMS. The cotton fabric was treated with these compounds and aminopropyltriethoxysilane (APTES) a sol-gel precursor by using sol-gel process. FTIR spectrum of treated fabric shows additional peaks at 1240 (P=O), 1044 (Si-O-Si) and 794 cm-1 (Si-O), which shows the presence of flame retardant coating on fabric. Thermogravimetric analysis was employed to conduct the change in path of thermal degradation of treated cotton fabric. The behavior of flame retardancy was assessed through auto flammability and limiting oxygen index examinations. The treated cotton fabric exhibits outstanding flame retardant properties during combustion and are extinguished promptly once the ignition is eliminated. The limiting oxygen index value of the cotton fabric after treatment with tetraPPE/APTES flame retardant reached 38.3%, which is sufficiently above the flame retardant value of about 27%. Morphological structures of fabric were also investigated using FESEM.
- Open Access
- 30 March 2024
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 36 (4) , 901-906
Effect of Phosphorus-Nitrogen based Flame-Retardant Combined with Zinc Borate on Thermal Stability and Flame Retardancy of Epoxy Clay Nanocomposites
A phosphorus-nitrogen containing 6,6-(piperazine-1,4-diyl)bis(6H-dibenzo[c,e][1,2]oxaphosphinine 6-oxide) (DOPO-PZ) flame-retardant was synthesized and its effect combined with zinc borate (ZnB) and nanoclay (NC) on thermal stability and flame retardancy of epoxy resin was studied. Various epoxy composites containing DOPO, DOPO-PZ, ZnB and NC using curing agent diaminodiphenylsulfone (DDS) were prepared. The X-ray diffraction (XRD) and transmission electron microscope (TEM) micrographs of the composites showed intercalated nanostructure of epoxy-clay nanocomposites. In thermogravimetric analysis (TGA), pure epoxy gave 3.4% char yield at 700 ºC in nitrogen atmosphere, while in case of EP/DOPO-PZ/ZnB/NC sample having 1% phosphorus content, 5 wt.% zinc borate (ZnB) and 3 wt.% nanoclay (NC), the char yield is increased to 24.0%. Differential scanning calorimetry (DSC) study showed decrease in the glass transition temperature (Tg) on the addition of flame-retardant due to plasticization effect and increase in Tg on addition of nanoclay due to formation of nanostructure of epoxy composites. The EP/DOPO-PZ/ZnB/NC nanocomposite sample exhibited a limiting oxygen index (LOI) value of 29.2% and passed the UL-94 test with a V-0 rating and thus achieved a sufficient flame retardancy.
- 30 March 2024
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 36 (4) , 901-906
Open AccessEffect of Phosphorus-Nitrogen based Flame-Retardant Combined with Zinc Borate on Thermal Stability and Flame Retardancy of Epoxy Clay Nanocomposites
A phosphorus-nitrogen containing 6,6-(piperazine-1,4-diyl)bis(6H-dibenzo[c,e][1,2]oxaphosphinine 6-oxide) (DOPO-PZ) flame-retardant was synthesized and its effect combined with zinc borate (ZnB) and nanoclay (NC) on thermal stability and flame retardancy of epoxy resin was studied. Various epoxy composites containing DOPO, DOPO-PZ, ZnB and NC using curing agent diaminodiphenylsulfone (DDS) were prepared. The X-ray diffraction (XRD) and transmission electron microscope (TEM) micrographs of the composites showed intercalated nanostructure of epoxy-clay nanocomposites. In thermogravimetric analysis (TGA), pure epoxy gave 3.4% char yield at 700 ºC in nitrogen atmosphere, while in case of EP/DOPO-PZ/ZnB/NC sample having 1% phosphorus content, 5 wt.% zinc borate (ZnB) and 3 wt.% nanoclay (NC), the char yield is increased to 24.0%. Differential scanning calorimetry (DSC) study showed decrease in the glass transition temperature (Tg) on the addition of flame-retardant due to plasticization effect and increase in Tg on addition of nanoclay due to formation of nanostructure of epoxy composites. The EP/DOPO-PZ/ZnB/NC nanocomposite sample exhibited a limiting oxygen index (LOI) value of 29.2% and passed the UL-94 test with a V-0 rating and thus achieved a sufficient flame retardancy.
- 26 January 2024
- Published by Wiley in Fire and Materials
- Vol. 48 (5) , 525-535
Synthesis and flame‐retardant analysis of a novel P/N containing flame retardant on epoxy resin composites
A new reactive flame‐retardant N′‐(1‐(4‐hydroxyphenyl)‐1‐(6‐oxido‐6H‐dibenzo[c,e][1,2]oxaphosphinin‐6‐yl)ethyl) benzohydrazide (DOPO‐BD) was synthesized via a two‐step reaction involving the Schiff base reaction between benzohydrazide and 4‐hydroxy acetophenone, followed by a reaction between the imine‐based condensation product and 9, 10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO). The chemical structure of DOPO‐BD was well characterized by Fourier transform infrared spectra (FTIR), 1H, 13C, 31P NMR, and high‐resolution mass spectrometry (HRMS). The DOPO‐BD was utilized as a reactive flame retardant and co‐hardener in DGEBA/DDS. The epoxy composites of varying phosphorus weight percentages were synthesized. UL‐94 and LOI tests were used to investigate the flammability of composites. The epoxy composites retained good transparency, which was measured by UV–vis spectroscopy. Thermogravimetric analysis (TGA) observed an increase in the thermal stability of epoxy composites in a higher temperature range with increased char yield. In the UL‐94 and LOI tests, EP/DOPO‐BD(1.5%P) sample gave a V‐0 rating and 30% LOI value. The cone calorimeter test indicated a decrease in total heat released (THR), peak of heat release rate (pHRR), and total smoke production (TSP) for EP/DOPO‐BD(1.5%P) in comparison with epoxy (EP). The mechanical properties and glass transition temperature (Tg) of the epoxy composites were determined by Dynamic mechanical analysis (DMA), which showed an increase in storage modulus and a decrease in Tg.
- 26 January 2024
- Published by Wiley in Fire and Materials
- Vol. 48 (5) , 525-535
Synthesis and flame‐retardant analysis of a novel P/N containing flame retardant on epoxy resin composites
A new reactive flame‐retardant N′‐(1‐(4‐hydroxyphenyl)‐1‐(6‐oxido‐6H‐dibenzo[c,e][1,2]oxaphosphinin‐6‐yl)ethyl) benzohydrazide (DOPO‐BD) was synthesized via a two‐step reaction involving the Schiff base reaction between benzohydrazide and 4‐hydroxy acetophenone, followed by a reaction between the imine‐based condensation product and 9, 10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO). The chemical structure of DOPO‐BD was well characterized by Fourier transform infrared spectra (FTIR), 1H, 13C, 31P NMR, and high‐resolution mass spectrometry (HRMS). The DOPO‐BD was utilized as a reactive flame retardant and co‐hardener in DGEBA/DDS. The epoxy composites of varying phosphorus weight percentages were synthesized. UL‐94 and LOI tests were used to investigate the flammability of composites. The epoxy composites retained good transparency, which was measured by UV–vis spectroscopy. Thermogravimetric analysis (TGA) observed an increase in the thermal stability of epoxy composites in a higher temperature range with increased char yield. In the UL‐94 and LOI tests, EP/DOPO‐BD(1.5%P) sample gave a V‐0 rating and 30% LOI value. The cone calorimeter test indicated a decrease in total heat released (THR), peak of heat release rate (pHRR), and total smoke production (TSP) for EP/DOPO‐BD(1.5%P) in comparison with epoxy (EP). The mechanical properties and glass transition temperature (Tg) of the epoxy composites were determined by Dynamic mechanical analysis (DMA), which showed an increase in storage modulus and a decrease in Tg.
- 7 April 2023
- Published by SAGE Publications in High Performance Polymers
- Vol. 35 (7) , 740-749
Synthesis and characterization of a novel P/N containing flame retardant and its effect on flame-retardancy, thermal and mechanical properties of epoxy/clay nanocomposites
A P/N containing flame retardant DOPO-QN was synthesized by a reaction between 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and 8-hydroxyquinoline (QN). Its chemical structure was characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR) like 1H, 13C, 31P NMR, and high-resolution mass spectrometry (HRMS) techniques. The synthesized DOPO-QN was employed as an additive type flame retardant in combination with clay nanomer 1.34TCN (NC) in diglycidyl ether of bisphenol A/4,4ʹ-diaminodiphenlsulfone (DGEBA/DDS) to synthesize epoxy thermosets. The fire behavior of synthesized epoxy thermosets was studied by UL-94, limiting oxygen index (LOI), and cone calorimeter tests. The EP/DOPO-QN (1.5%P)/NC sample passed the UL-94 test with a V-0 rating and LOI value of 26.5%. A decrease in peak heat released, carbon monoxide, and carbon dioxide emissions was observed in the cone calorimeter test. Thermogravimetric analysis (TGA) of epoxy thermosets showed an increase in thermal stability at a higher temperature range on the formation of nanocomposites. Also, a remarkable improvement in storage modulus was observed for the EP/DOPO-QN (1.5%P)/NC sample containing 2.0% NC in dynamic mechanical analysis (DMA).
- 7 April 2023
- Published by SAGE Publications in High Performance Polymers
- Vol. 35 (7) , 740-749
Synthesis and characterization of a novel P/N containing flame retardant and its effect on flame-retardancy, thermal and mechanical properties of epoxy/clay nanocomposites
A P/N containing flame retardant DOPO-QN was synthesized by a reaction between 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and 8-hydroxyquinoline (QN). Its chemical structure was characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR) like 1H, 13C, 31P NMR, and high-resolution mass spectrometry (HRMS) techniques. The synthesized DOPO-QN was employed as an additive type flame retardant in combination with clay nanomer 1.34TCN (NC) in diglycidyl ether of bisphenol A/4,4ʹ-diaminodiphenlsulfone (DGEBA/DDS) to synthesize epoxy thermosets. The fire behavior of synthesized epoxy thermosets was studied by UL-94, limiting oxygen index (LOI), and cone calorimeter tests. The EP/DOPO-QN (1.5%P)/NC sample passed the UL-94 test with a V-0 rating and LOI value of 26.5%. A decrease in peak heat released, carbon monoxide, and carbon dioxide emissions was observed in the cone calorimeter test. Thermogravimetric analysis (TGA) of epoxy thermosets showed an increase in thermal stability at a higher temperature range on the formation of nanocomposites. Also, a remarkable improvement in storage modulus was observed for the EP/DOPO-QN (1.5%P)/NC sample containing 2.0% NC in dynamic mechanical analysis (DMA).
- Open Access
- 19 September 2022
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 34 (10) , 2593-2596
Admicellar Polymerization of Tris(2-acryloyloxyethyl)phosphate on Cotton Fabric for Flame Retardant Finishing
To improve the flame retardant property, the admicellar polymerization process was applied to polymerize and coat the tris(2-acryl-oyloxyethyl)phosphate (PTAP) monomer on cotton fabric (CF). The polymerization was completed with the support of a cationic surfactant cetyltrimethylammonium bromide (CTAB) and an initiator 2,2′-azobisisobutyronitrile (AIBN). Thermogravimetric analysis (TGA) and limiting oxygen index test (LOI) were performed to find out the effects on degradation and flammability of modified cotton fabric. One of the modified cotton fabric samples (CF-PTAP) show the decrease in onset temperature caused by acid catalyzed dehydration released from PTAP polymer placed on cotton fabric substrate. The increase in char yield (20.9%) and LOI value (25.0% demonstrated a condensed phase flame retardant action) owing to the presence of PTAP polymer on substrate.
- 19 September 2022
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 34 (10) , 2593-2596
Open AccessAdmicellar Polymerization of Tris(2-acryloyloxyethyl)phosphate on Cotton Fabric for Flame Retardant Finishing
To improve the flame retardant property, the admicellar polymerization process was applied to polymerize and coat the tris(2-acryl-oyloxyethyl)phosphate (PTAP) monomer on cotton fabric (CF). The polymerization was completed with the support of a cationic surfactant cetyltrimethylammonium bromide (CTAB) and an initiator 2,2′-azobisisobutyronitrile (AIBN). Thermogravimetric analysis (TGA) and limiting oxygen index test (LOI) were performed to find out the effects on degradation and flammability of modified cotton fabric. One of the modified cotton fabric samples (CF-PTAP) show the decrease in onset temperature caused by acid catalyzed dehydration released from PTAP polymer placed on cotton fabric substrate. The increase in char yield (20.9%) and LOI value (25.0% demonstrated a condensed phase flame retardant action) owing to the presence of PTAP polymer on substrate.
- 1 December 2021
- Published by Bentham Science Publishers Ltd. in Current Applied Polymer Science
- Vol. 4 (3) , 217-226
Effect of Functionality of Organophosphorus Flame Retardants on Flammability and Thermal Stability of DGEBA-Based Epoxy Resin Nanocomposites
Background: Epoxy resins have been extensively used in fire hazard environments, such as printed circuit boards, electrical isolation materials, adhesives, construction, and transportation due to their economically viable, simple processing. Therefore, the development of thermally stable and flame-retardant epoxy resin systems is essential. Objective: The aim of the present study was to study the effect of the functionality of organophosphorus flame retardants on DGEBA-based epoxy resin nanocomposites on thermal stability and flame retardancy. Method: DGEBA (diglycidyl ether of bisphenol-A)-based epoxy resin nanocomposites having 2.0 wt% phosphorus were prepared with organophosphorus flame retardants with different functionalities by using an in-situ polymerization method. The flame retardant compounds uni-functional 9, 10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and bi-functional 2-(6-oxid-6Hdibenz [c, e] [1, 2] oxaphosphorin 6-yl) 1, 4-benzenediol (DOPO-HQ) were prepared. The thermal behavior of composites was studied by TG and DTA techniques. The flammability behavior was investigated by UL-94 and limiting oxygen index (LOI) tests. Results: The XRD and TEM results showed the mixed dispersion of nanoclay platelets in an epoxy matrix. The thermal stability of the epoxy composite (EPDOPO-HQ) containing bi-functional DOPOHQ is increased by 16°C in comparison to the epoxy composite (EPDOPO) containing uni-functional DOPO. According to the TG analysis, the addition of nanoclay was observed to be more effective and synergistic with bi-functional DOPO-HQ as the EPDOPO-HQ/NC sample gains more resistance to degradation after around 450°C and also gave rise to a high char yield. Epoxy resin samples containing reactive flame retardants gave UL-94 V-0 rating, but further addition of 2.0 wt% nanoclay lowered the rating from V-0 to V-1. Conclusions: TG analysis of the epoxy composite samples showed that the addition of nanoclay were observed to be synergistic with bi-functional flame retardant (DOPO-HQ) as the EPDOPO-HQ/NC sample gained more resistance to degradation after around 450°C due to the formation of mixed intercalated and exfoliated structure. The EPDOPO-HQ sample gave a high char yield with increased onset degradation temperature, high thermal stability as well as high flame retardancy.
- 1 December 2021
- Published by Bentham Science Publishers Ltd. in Current Applied Polymer Science
- Vol. 4 (3) , 217-226
Effect of Functionality of Organophosphorus Flame Retardants on Flammability and Thermal Stability of DGEBA-Based Epoxy Resin Nanocomposites
Background: Epoxy resins have been extensively used in fire hazard environments, such as printed circuit boards, electrical isolation materials, adhesives, construction, and transportation due to their economically viable, simple processing. Therefore, the development of thermally stable and flame-retardant epoxy resin systems is essential. Objective: The aim of the present study was to study the effect of the functionality of organophosphorus flame retardants on DGEBA-based epoxy resin nanocomposites on thermal stability and flame retardancy. Method: DGEBA (diglycidyl ether of bisphenol-A)-based epoxy resin nanocomposites having 2.0 wt% phosphorus were prepared with organophosphorus flame retardants with different functionalities by using an in-situ polymerization method. The flame retardant compounds uni-functional 9, 10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and bi-functional 2-(6-oxid-6Hdibenz [c, e] [1, 2] oxaphosphorin 6-yl) 1, 4-benzenediol (DOPO-HQ) were prepared. The thermal behavior of composites was studied by TG and DTA techniques. The flammability behavior was investigated by UL-94 and limiting oxygen index (LOI) tests. Results: The XRD and TEM results showed the mixed dispersion of nanoclay platelets in an epoxy matrix. The thermal stability of the epoxy composite (EPDOPO-HQ) containing bi-functional DOPOHQ is increased by 16°C in comparison to the epoxy composite (EPDOPO) containing uni-functional DOPO. According to the TG analysis, the addition of nanoclay was observed to be more effective and synergistic with bi-functional DOPO-HQ as the EPDOPO-HQ/NC sample gains more resistance to degradation after around 450°C and also gave rise to a high char yield. Epoxy resin samples containing reactive flame retardants gave UL-94 V-0 rating, but further addition of 2.0 wt% nanoclay lowered the rating from V-0 to V-1. Conclusions: TG analysis of the epoxy composite samples showed that the addition of nanoclay were observed to be synergistic with bi-functional flame retardant (DOPO-HQ) as the EPDOPO-HQ/NC sample gained more resistance to degradation after around 450°C due to the formation of mixed intercalated and exfoliated structure. The EPDOPO-HQ sample gave a high char yield with increased onset degradation temperature, high thermal stability as well as high flame retardancy.
- 9 May 2017
- Published by Taylor & Francis in Materials Research Innovations
- p. 1-9
Effects of nanoclay and flame retardant additives on glass transition temperature, thermal stability and flammability of epoxy composites
Epoxy/nanoclay composites containing ammonium polyphosphate (AP) were prepared by in situ polymerization method using compression molding machine. XRD patterns indicated the formation of epoxy/clay nanocomposites. The glass transition temperature measured by DSC was increased with the addition of nanoclay as well as AP separately in epoxy matrix but decreased when nanoclay and AP added together. On adding AP, the epoxy composites showed early start of degradation but after 400 °C composites became stable and gave high char yield in thermogravimetic analysis. Epoxy composites containing 10% AP accomplished the flame retardant property with V-0 rating in UL-94 test.
- 9 May 2017
- Published by Taylor & Francis in Materials Research Innovations
- p. 1-9
Effects of nanoclay and flame retardant additives on glass transition temperature, thermal stability and flammability of epoxy composites
Epoxy/nanoclay composites containing ammonium polyphosphate (AP) were prepared by in situ polymerization method using compression molding machine. XRD patterns indicated the formation of epoxy/clay nanocomposites. The glass transition temperature measured by DSC was increased with the addition of nanoclay as well as AP separately in epoxy matrix but decreased when nanoclay and AP added together. On adding AP, the epoxy composites showed early start of degradation but after 400 °C composites became stable and gave high char yield in thermogravimetic analysis. Epoxy composites containing 10% AP accomplished the flame retardant property with V-0 rating in UL-94 test.
- 1 December 2014
- Published by Springer Nature in Fibers and Polymers
- Vol. 15 (12) , 2495-2503
Cotton fabric coated with intumescent formulation containing polymers and inorganic additives: Thermal and flammability behaviour
- 1 December 2014
- Published by Springer Nature in Fibers and Polymers
- Vol. 15 (12) , 2495-2503
Cotton fabric coated with intumescent formulation containing polymers and inorganic additives: Thermal and flammability behaviour